5-145
Driving your vehicle
Warning Volume
With the engine on, select ‘Driver
Assistance →Warning Volume’ from
the Settings menu to change the
Warning Volume to ‘High’, ‘Medium’
or ‘Low’ for Highway Driving Assist.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
Highway Driving Assist
Operation
Highway Driving Assist display and
control
You can see the status of the
Highway Driving Assist operation in
the Driving Assist mode on the clus-
ter. Refer to “LCD Display Modes”
section in chapter 3.
Highway Driving Assist will be dis-
played as below depending on the
status of the function. (1) Highway Driving Assist indicator,
whether there is a vehicle ahead
and the selected distance level
are displayed.
❈ Highway Driving Assist indicator
- Green : Operating state
- Grey : Standby state
5
OTM070141NOTMA070009/OTMA070010
■ Operating state■Standby state
5-157
Driving your vehicle
5
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the turn signal indica-
tor is turned on to the left (left-hand
drive) or turned on to the right (right-
hand drive) while Smart Cruise
Control is operating, and the follow-
ing conditions are satisfied:
Your vehicle speed is above 40mph (60 km/h)
The hazard warning flasher is off
A vehicle is detected in front of your vehicle
Deceleration is not needed to maintain distance with the vehicle
in front
Smart Cruise Control display
and control
Basic function
You can see the status of the Smart
Cruise Control operation in the
Driving Assist view on the cluster.
Refer to “LCD Display Modes” sec-
tion in chapter 4.
Smart Cruise Control will be dis-
played as below depending on the
status of the function.
When the turn signal indicator
is turned on to the left (left-
hand drive) or turned on to
the right (right-hand drive)
while there is a vehicle ahead,
the vehicle may accelerate
temporarily. Pay attention to
the road conditions at all
times.
Regardless of your countries
driving direction, Overtaking
Acceleration Assist will oper-
ate when the conditions are
satisfied. When using the
function in countries with dif-
ferent driving direction,
always check the road condi-
tions at all times.
WARNING
