7-8
Maintenance
Normal maintenance schedule (Cont.)
The following maintenance services must be performed to ensure good vehicle performance. 
Keep receipts for all vehicle services to protect your warranty. Where both kilometrage and time are shown, the fre- 
quency of service is determined by whichever occurs first. 
R : Replace  I : Inspect and, after Inspection, clean, adjust, repair or replace if necessary.
No.DESCRIPTIONKILOMETERS X 10001224364860728496108120132144156168180192
MONTHS6121824303642485460667278849096
1Cooling system hoses and connectionsInspect every 12,000 km
2Rotate tires  
(including tire pressure and tread wear)Rotate every 6,000 km or 6 months
3Climate control air filterRRRRRRRR
4CoolantReplace every 60,000 km (40,000 miles) or 36 months*1 
*2
512V Battery conditionInspect every 12,000 km
6Brake hoses and lines and connections  (including booster)IIIIIIII
7Disc brakes and padsIIIIIIII
8Steering gear rack, linkage and bootsIIIIIIII
9Suspension ball joints and mounting boltsIIIIIIII
10Drive shafts and bootsIIIIIIII
11Air conditioning compressor,  
air conditioner refrigerant and performanceIIIIIIII
*
1
: When replacing or adding coolant, we recommend that you visit an authorized HYUNDAI dealer.
* 2
:For your convenience, it can be replaced prior to it's interval when you do maintenance of other items. 
7-11
7
Maintenance
EEXX PPLLAA NN AATTIIOO NN  OO FF  SS CC HH EEDD UU LLEE DD   MM AAIINN TTEENN AANN CCEE   IITT EEMM SS
Cooling System
Check cooling system components, 
such as radiator, coolant reservoir,
hoses and connections for leakage
and damage. Replace any damaged
parts.
Coolant 
The coolant should be changed at 
the intervals specified in the mainte-
nance schedule.
Reduction Gear Fluid
Inspect the reduction gear fluid according to the maintenance sched-
ule.
Brake Hoses and Lines
Visually check for proper installation, 
chafing, cracks, deterioration and
any leakage. Replace any deteriorat-
ed or damaged parts immediately.
Brake Fluid 
Check brake fluid level in the brake 
fluid reservoir. The level should be
between the MIN and the MAX
marks on the side of the reservoir.
Use only hydraulic brake fluid con-
forming to DOT 4 specification.
Brake Discs, Pads, Calipers 
and Rotors
Check the pads for excessive wear, 
discs for run out and wear, and
calipers for fluid leakage.
Suspension Mounting Bolts 
Check the suspension connections 
for looseness or damage. Retighten
to the specified torque.
Steering Gear Box, Linkage & 
Boots/Lower Arm Ball Joint
With the vehicle stopped and the 
vehicle off, check for excessive free-
play in the steering wheel. Check the
linkage for bends or damage. Check
the dust boots and ball joints for
deterioration, cracks, or damage.
Replace any damaged parts.
Drive Shafts and Boots
Check the drive shafts, boots and 
clamps for cracks, deterioration, or
damage. Replace any damaged
parts and, if necessary, repack the
grease.
Air Conditioning Refrigerant 
Check the air conditioning lines and 
connections for leakage and dam-
age.