2022 HYUNDAI GENESIS GV70 engine

Driver Assistance System
7-80
Smart Cruise Control Settings
Setting features
OJK070082OJK070082
To turn on Smart Cruise Control
• Press the Driving Assist () button
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.
• If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0~ 20 mph
(0~ 30 km/h) when you press the Driving
Assist (
) button, the Smart Cruise
Control speed will be set to 20 mph (30
km/h).
OJK070088OJK070088
To set vehicle distance
Each time the button is pressed, the
headway changes as follows:
Distance 4 Distance 3
Distance 1Distance 2
Information
• If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
Distance 4 -
approximately 172 ft. (53 m)
Distance 3 -
approximately 130 ft. (40 m)
Distance 2 -
approximately 106 ft. (30 m)
Distance 1 -
approximately 82 ft. (25 m)
• The distance is set to the last set
distance when the engine is restarted,
or when Smart Cruise Control was
temporarily canceled.

07
7-83
OJK070016LOJK070016L
Based on Driving Style
• With the engine on, if ‘Driver
$VVLVWDQFH

Driver Assistance System
7-84
OJK071003NOJK071003N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFH

Driver Assistance System
7-98
Navigation-based Smart Cruise Control
will help drive at a certain speed
according to the road conditions when
driving on highways (or motorways)
by using road information from the
navigation system while Smart Cruise
Control is operating.
Information
• The Navigation-based Smart Cruise
Control is available only on controlled
access road of certain highways.
ÃControlled access road indicates
roads with limited entrances and
exits that allow uninterrupted high
speed traffic flow. Only passenger
cars and motorcycles are allowed on
controlled access roads.
Available highway (Controlled access road)
USASelect Interstate Highway
and U.S. (Federal) and State
Highways
CanadaSelect Provincial and Territorial
Highways
• Additional highways may be expanded
by future navigation updates.
Information
Navigation-based Smart Cruise Control
operates on main roads of highways (or
motorways), and does not operate on
interchanges or junctions.
+LJKZD\&XUYH=RQH$XWR6ORZGRZQ
If vehicle speed is high, Highway Curve
Zone Auto Slowdown function will
temporarily decelerate your vehicle
or limit acceleration to help you drive
safely on a curve based on the curve
information from the navigation.
+LJKZD\6HW6SHHG$XWR&KDQJH
Highway Set Speed Auto Change
function automatically changes Smart
Cruise Control set speed based on
the speed limit information from the
navigation.
1DYLJDWLRQ%DVHG6PDUW&UXLVH
Control Settings
Setting features
OJK070161LOJK070161L
With the engine on, select ‘Driver
$VVLVWDQFH

07
7-105
Lane Following Assist is designed to help
detect lane markings and/or vehicles on
the road, and assists the driver’s steering
to help keep the vehicle between lanes.
Detecting sensor
OJK071223NOJK071223N[1]: Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
and front vehicles.
Refer to the picture above for the
detailed location of the detecting sensor.
&$87,21
For more details on the precautions
RIWKHIURQWYLHZFDPHUDUHIHUWR

U)RUZDUG&ROOLVLRQ$YRLGDQFH$VVLVW
)&$
VVHFWLRQLQWKLVFKDSWHU
Lane Following Assist Settings
Setting features
OJK070097OJK070097Turning Lane Following Assist On/Off
With the engine on, shortly press the
Lane Driving Assist button located on the
steering wheel to turn on Lane Following
Assist. The grey or green
indicator
light will illuminate on the cluster.
Press the button again to turn off the
function.
/$1()2//2:,1*$66,67

Driver Assistance System
7-106
OJK071003NOJK071003N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFH

Driver Assistance System
7-110
Detecting sensor
OJK071223NOJK071223N
OJK071022NOJK071022N
OJK071023NOJK071023N[1] : Front view camera, [2]: Front radar,
[3] : Front corner radar (if equipped),
[4] : Rear corner radar (if equipped)
Refer to the picture above for the
detailed location of the detecting
sensors.
&$87,21
For more details on the precautions of
WKHGHWHFWLQJVHQVRUVUHIHUWR
U)RUZDUG
&ROOLVLRQ$YRLGDQFH$VVLVW)&$
V
VHFWLRQLQWKLVFKDSWHU
+LJKZD\'ULYLQJ$VVLVW6HWWLQJV
Setting features
OJK071226NOJK071226N
Basic function
With the engine on, select or deselect

S'ULYHU$VVLVWDQFH

07
7-111
Information
• When ‘Highway Driving Assist’ is
deselected, the setting for ‘Highway
Lane Change Assist’ cannot be
changed.
• If there is a problem with the functions,
the settings cannot be changed. Have
the vehicle inspected by an authorized
retailer of Genesis Branded products.
• If the engine is restarted, the functions
will maintain the last setting.
:$51,1*
)RU\RXUVDIHW\FKDQJHWKH6HWWLQJV
DIWHUSDUNLQJWKHYHKLFOHDWDVDIH
ORFDWLRQ
OJK071003NOJK071003N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFH