2022 HYUNDAI GENESIS G70 change wheel
[x] Cancel search: change wheelPage 25 of 530
Vehicle Information, Consumer Information and Reporting Safety Defects
2-10
Items Tire sizeWheel
sizeInflation pressure
kPa (psi)
Wheel nut
torque
N J I[ P O E I[ I W
1[ P Normal
loadMaximum
Load OR
over 100
mph *
2
Full
size
tire2.0L
T-GDI
18 inchFront 225/45R18 8.0J X 18250 (36) 260 (38)
11~13 (79~94,
107~127)
Rear 225/45R18 8.0J X 18270 (39) 270 (39)
19 inchFront 225/40R19 8.0J X 19250 (36) 260 (38)
Rear 225/35R19 8.5J X 19250 (36) 270 (39)
19 inchFront 225/40ZR19 8.0J X 19250 (36) 260 (38)
Rear 255/35ZR19 8.5J X 19250 (36) 270 (39)
3.3L
T-GDI
18 inchFront 225/45R18 8.0J X 18250 (36) 260 (38)
Rear 225/45R18 8.0J X 18270 (39) 270 (39)
19 inch
(2WD)Front 225/40R19 8.0J X 19250 (36) 260 (38)
Rear 225/35R19 8.5J X 19250 (36) 270 (39)
19 inch
(2WD)Front 225/40ZR19 8.0J X 19250 (36) 260 (38)
Rear 255/35ZR19 8.5J X 19250 (36) 270 (39)
19 inch
(AWD)Front 225/40R19 8.0J X 19260 (38) 260 (38)
Rear 225/35R19 8.5J X 19250 (36) 270 (39)
19 inch
(AWD)Front 225/40ZR19 8.0J X 19260 (38) 260 (38)
Rear 255/35ZR19 8.5J X 19250 (36) 270 (39)
Compact
spare tire *1T135/80R18 4.0T X 18420 (60) 420 (60)
*1 : If your vehicle is not equipped with a compact spare tire, your vehicle will be equipped
with a Tire Mobility Kit.
*2 : Must drive only where the speed is legal.
NOTICE
[ Ambient temperature affects tire pressure (about 1 psi (7 kPa) for every 12°F (7°C)
F K D Q J H , I F R O G H U W H P S H U D W X U H V D U H D Q W L F L S D W H G L W L V S H U P L V V L E O H W R L Q F U H D V H F R O G
tire inflation pressure by up to 3 psi (20 kPa) over the specification. If extreme
W H P S H U D W X U H F K D Q J H V D U H H [ S H F W H G E H V X U H W R F K H F N D Q G D G M X V W W L U H S U H V V X U H
accordingly.
[ 7 L U H L Q I O D W L R Q S U H V V X U H G H F U H D V H V Z L W K K L J K H U H O H Y D W L R Q D Q G L Q F U H D V H V Z L W K O R Z H U
elevation (about 2.4 psi (10 kPa) for every kilometer (or mile) elevation change).
% H V X U H W R F K H F N D Q G D G M X V W W L U H S U H V V X U H D F F R U G L Q J O \ Z K H Q G U L Y L Q J W K U R X J K
changing elevations.
[ ' R Q R W H [ F H H G W K H P D [ L P X P L Q I O D W L R Q S U H V V X U H D V I R X Q G R Q W K H V L G H Z D O O R I W K H
tire(s).
TIRES AND WHEELS
Page 127 of 530
Instrument Cluster
4-30
Select contents
You can select the items to be displayed
in Utility view.
OIK040084L
1. Press and hold the OK switch on the
steering wheel.
2. Use the
, (Up, Down) switch
to change items, and press the OK
switch to select or deselect the item.
3. After selecting the items to be
displayed in the Utility view, press the
(MODE) button to exit the ‘Select
Contents’ display.
WARNING
To avoid driver distractions, do not
adjust the setting while driving the
vehicle which may lead to an accident.
Option Menu
Press the OK switch to enter Option
menu.
WARNING
To avoid driver distractions, do not
adjust the setting while driving which
may lead to an accident.
Information
The information provided may differ
depending on which functions are
applicable to your vehicle.
Menu Explanation
Service
messagesTo check vehicle
warning messages.
Head-up displayTo activate or
deactivate head-up
display.
Driver Assistance
settingsTo directly display
“Driver Assistance”
menu on the
infotainment system
screen
Speed unitTo set speed unit
between km/h and
MPH.
Page 128 of 530
04
4-31
Service messages
OIK040065L
When Service Messages menu is
selected, press the OK switch on the
steering wheel to check vehicle warning
messages.
Head-up display (if equipped)
OIK040066L
When Head-Up Display menu is selected,
press the OK switch on the steering
wheel. You may select or deselect head-
up display by pressing the OK switch.
Driver Assistance settings
OIK040067L
When Driver Assistance Settings menu
is selected, press the OK switch on the
steering wheel. The ‘Driver Assistance’
menu will be displayed on the
infotainment system screen.
Speed unit (if equipped)
OIK040068L
When the Speed Unit menu is selected,
press the OK switch on the steering
wheel. You can change the speed unit
setting between km/h and MPH for the
cluster.
Page 164 of 530
05
5-35
Electric Power Steering (EPS)
The system assists you with steering the
vehicle. If the vehicle is turned off or
if the power steering system becomes
inoperative, you may still steer the
vehicle, but it will require increased
steering effort.
Should you notice any change in the
effort required to steer during normal
vehicle operation, we recommend that
you have the system checked by an
authorized retailer of Genesis Branded
products.
CAUTION
If Electric Power Steering does not
operate normally, the warning light
and the message ‘Check motor driven
power steering’ will illuminate on the
instrument cluster. You may steer the
vehicle, but it will require increased
steering efforts. We recommend that
you take the vehicle to an authorized
retailer of Genesis Branded products
and have the system checked as soon as
possible.
Information
The following symptoms may occur during
normal vehicle operation:
[ The steering effort may be high
immediately after pressing the Engine
6 W D U W 6 W R S E X W W R Q W R W K H 2 1 S R V L W L R Q
This happens as the system performs
W K H ( 3 6 V \ V W H P G L D J Q R V W L F V : K H Q W K H
diagnostics is completed, the steering
wheel effort will return to its normal
condition.
[ : K H Q W K H E D W W H U \ Y R O W D J H L V O R Z \ R X
may have to put more steering effort.
However, it is a temporary condition so
that it will return to normal condition
after charging the battery.
[ A click noise may be heard from the
( 3 6 U H O D \ D I W H U W K H ( Q J L Q H 6 W D U W 6 W R S
button is in the ON or OFF position.
[ 0 R W R U Q R L V H P D \ E H K H D U G Z K H Q W K H
vehicle is at a stop or at a low driving
speed.
[ : K H Q \ R X R S H U D W H W K H V W H H U L Q J Z K H H O
in low temperatures, abnormal noise
may occur. If the temperature rises, the
noise will disappear.
This is a normal condition.
[ : K H Q D Q H U U R U L V G H W H F W H G I U R P ( 3 6
the steering effort assist function will
not be activated in order to prevent
accidents. Instrument cluster warning
lights may be on or the steering effort
may be high. If these symptoms occur,
drive the vehicle to a safe area as soon
as it is safe to do so. Have the system
checked by an authorized retailer of
Genesis Branded products as soon as
possible.
STEERING WHEEL
Page 165 of 530
Convenient Features
5-36
Tilt/Telescopic Steering
When adjusting the steering wheel to a
comfortable position, adjust the steering
wheel so that it points toward your chest,
not toward your face. Make sure you can
see the instrument cluster warning lights
and gauges. After adjusting, push the
steering wheel both up and down to be
certain it is locked in position.
Always adjust the position of the steering
wheel before driving.
WARNING
NEVER adjust the steering wheel while
driving. This may cause loss of vehicle
control resulting in an accident.
Manual adjustment
OIK050008
To adjust the steering wheel angle and
height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the
desired angle (2) and distance
forward/back (3).
3. Pull up the lock-release lever to lock
the steering wheel in place.
Information
Sometimes the lock release lever may not
engage completely. This may occur when
the gears of the locking mechanism do not
completely mesh. If this occurs, pull down
on the lock-release lever, readjust the
steering wheel again, and then pull back
up on the release lever to lock the steering
wheel in place.
Power adjustment
OIK050009
To change the steering wheel angle and
height:
[ Push the switch (1) up and down to
adjust the angle (2).
[ Push the switch forward or rearward
to adjust the height (3).
NOTICE
Do not adjust the steering wheel
longer than necessary when the
engine is turned off. This may result in
unnecessary battery drain.
Page 167 of 530
Convenient Features
5-38
Heated Steering Wheel
(if equipped)
„Type A
OIK050010
„Type B
OIK050010L
When the Engine Start/Stop button is in
the ON position or when the engine is
running, press the heated steering wheel
button to warm the steering wheel. The
indicator on the button will illuminate.
To turn the heated steering wheel off,
press the button again. The indicator on
the button will turn off.
[ Each time you push the switch, the
temperature setting changes as
follows:
OFF Ÿ HIGH ( ) Ÿ LOW ( )
[ When the heated steering wheel
switch is pressed to high () :
The heated steering wheel switch
automatically changes to the low
position after 30 minutes. You can
turn off the heated steering wheel
by pressing the switch to the OFF
position.
[ When the Engine Start/Stop button is
pressed to the ON position with the
heated steering wheel switch in the
high/low position, the heated steering
wheel automatically starts in the high
position.
[ When the Engine Start/Stop button is
pressed to the ON position with the
heated steering wheel OFF, the heated
steering wheel will stay OFF.
NOTICE
Do not install any cover or accessory
on the steering wheel. This cover or
accessory could cause damage to the
heated steering wheel system.
Page 254 of 530
Driving Your Vehicle
6-6
Engine Stop/Start Button Positions
Button Position Action Notes
OFFTo turn off the engine, press the
Engine Start/Stop button with the
vehicle shifted to P (Park).
Note if the Engine Start/Stop
button is pressed with the vehicle
shifted to D (Drive) or R (Reverse),
the gear will automatically shift to
P (Park).
If the Engine Start/Stop button is
pressed with the gear shifted to
N (Neutral), the Engine Start/Stop
button will change to the ACC
position.
The steering wheel locks to
protect the vehicle from theft.If the steering wheel is not locked
properly when you open the
driver’s door, the warning chime
will sound.
ACCPress the Engine Start/Stop button
when the button is in the OFF
position without depressing the
brake pedal.
Some of the electrical accessories
are usable.
The steering wheel unlocks.[ If you leave the Engine Start/Stop
button in the ACC position for
more than one hour, the battery
power will turn off automatically
to prevent the battery from
discharging.
[ If the steering wheel doesn’t
unlock properly, the Engine Start/
Stop button will not work. Press
the Engine Start/Stop button
while turning the steering wheel
right and left to release.
ONPress the Engine Start/Stop button
while it is in the ACC position
without depressing the brake
pedal.
The warning lights can be checked
before the engine is started.Do not leave the Engine Start/Stop
button in the ON position when the
engine is not running to prevent
the battery from discharging.
STARTTo start the engine, depress the
brake pedal and press the Engine
Start/ Stop button with the gear
shifted to the P (Park) or the N
(Neutral) position.
For your safety, start the engine
with the gear shifted to the P
(Park) position.If you press the Engine Start/Stop
button without depressing the
brake pedal, the engine does not
start and the Engine Start/Stop
button changes as follows:
2 ) )
Page 259 of 530
06
6-11
R (Reverse)
„D (Drive) Ÿ R (Reverse)
R N D
Unlock Button
OIK060003
„P (Park), N (Neutral) Ÿ R (Reverse)
R
P/N
Unlock Button
OIK060004
Use this position to drive the vehicle
rearward.
To move the shift lever to R (Reverse),
press the [UNLOCK] button while
depressing the brake pedal and then
move the shift lever forward.
N (Neutral)
„R (Reverse), D (Drive) Ÿ N (Neutral)
R N D
OIK060037
The wheels and transmission are not
engaged.
Use N (Neutral) if you need to restart a
stalled engine.
Shift into P (Park) if you need to leave
your vehicle for any reason.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
In N (Neutral), if the driver attempts to
turn off the engine, the transmission
remains in the N (Neutral) position and
the Engine Start/Stop button will be in
the ACC position.
To turn off the engine from the ACC
position, press the Engine Start/Stop
button to the ON position, press the P
button, and then press the Engine Start/
Stop button to the OFF position.
When either the driver's door or the
front passenger's door is opened with
the Engine Start/Stop button in the ACC
position and the shift lever in N (Neutral)
position, the engine is automatically
turned OFF and the transmission
automatically changes to the P (Park)
position.