Instrument Cluster
4-12
WARNING
Electronic Brake Force Distribution
(EBD) system warning light
When both ABS and Parking Brake &
Brake Fluid warning lights are on, the
brake system will not work normally
and you may experience an unexpected
and dangerous situation during sudden
braking.
If this occurs, avoid high speed driving
and abrupt braking.
Have the vehicle inspected by an
authorized retailer of Genesis Branded
products as soon as possible.
NOTICE
Electronic Brake Force Distribution
(EBD) system warning light
When the ABS warning light is on
or both ABS and Parking Brake &
Brake Fluid warning lights are on, the
speedometer, odometer, or tripmeter
may not work. Also, the EPS warning
light may illuminate and the steering
effort may increase or decrease.
If this occurs, have the vehicle
inspected by an authorized retailer of
Genesis Branded products as soon as
possible.
Electric Power Steering (EPS)
warning light
This warning light illuminates:
[ When you set the Engine Start/Stop
button to the ON position.
- The electric powering steering
warning light illuminates for about 3
seconds and then goes off.
[ Whenever there is a malfunction with
the electric power steering.
If this occurs, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.
Charging system warning
light
This warning light illuminates:
When there is a malfunction with either
the alternator or electrical charging
system.
If there is a malfunction with either the
alternator or electrical charging system:
1. Drive carefully to the nearest safe
location and stop your vehicle.
2. Turn the engine off and check the
alternator drive belt for looseness or
breakage.
If the belt is adjusted properly, there
may be a problem in the electrical
charging system.
If this occurs, have the vehicle
inspected by an authorized retailer of
Genesis Branded products as soon as
possible.
Maintenance
9-22
Changing Coolant
we recommend that the coolant changed
by an authorized retailer of Genesis
Branded products according to the
Maintenance Schedule at the beginning
of this chapter.
WARNING
Do not use engine coolant or antifreeze
in the washer fluid reservoir.
Engine coolant can severely obscure
visibility when sprayed on the
windshield and may cause loss of
vehicle control resulting in an accident.
Engine coolant may also cause damage
to paint and body trim.
NOTICE
To prevent damage to engine parts,
put a thick towel around the engine
coolant cap before refilling the
coolant to prevent the coolant from
overflowing into engine parts, such as
the alternator.
09
9-53
Engine compartment fuse panel
Fuse NameFuse Rating Circuit Protected
ALT175A
225AAlternator, Fuse - F2,
Multi Fuse 1 - F4, F6, F7, F8, F9, F10, F11, F12, F13
C/FAN3
125A[G6DP - BLDC Motor] Cooling Fan Controller
GLOW[D4HB] Glow Relay Unit
START30A RLY. 7 (Start Relay)
C/FAN180A [BLDC Motor] Cooling Fan Controller
B+350AICU Junction Block (Fuse - F5, Leak Current Autocut
Device Fuse - F2, F4, F13, F14, F21, F22)
B+250A ICU Junction Block (Fuse - F27, F35, F43, F51, F52)
B+150A ICU Junction Block (Fuse - F28, F29, F37, F45, F53)
EOP50A [With ISG] Electric Oil Pump Module
ESP140A ESP Control Module
ESP240A ESP Control Module
BLOWER40A RLY. 6 (Blower Relay)
IG230A PCB Block (IG2 Relay)
MDPS100A MDPS Unit
B+460APCB Block
(Engine Control Relay, Fuse - F4, F5, F13, F22)
C/FAN260A [DC Motor] RLY. 9 (Cooling Fan Relay)
E-CVVT140A [G4KL] RLY. 8 (E-CVVT Relay)
TRAILER40A Trailer Connector
FUEL HEATER40A Diesel Junction Block (RLY.1 (Fuel Filter Heater Relay))
PTC HEATER130A Diesel Junction Block (RLY.2 (PTC Heater #1 Relay))
PTC HEATER230A Diesel Junction Block (RLY.3 (PTC Heater #2 Relay))
PTC HEATER330A Diesel Junction Block (RLY.4 (PTC Heater #3 Relay))