2022 HYUNDAI GENESIS G70 jump cable

[x] Cancel search: jump cable

Page 261 of 530

HYUNDAI GENESIS G70 2022  Owners Manual 06
6-13
Shift-lock system 
For your safety, the automatic 
transmission has a shift-lock system 
which prevents shifting the transmission 
from P (Park) into R (Reverse) or D (Drive) 
unless the [UNLO

Page 299 of 530

HYUNDAI GENESIS G70 2022  Owners Manual 06
6-51
The severe weather conditions of winter quickly wear out tires and cause other 
problems. To minimize winter driving problems, you should take the following 
suggestions:
Snow or Icy Condition

Page 303 of 530

HYUNDAI GENESIS G70 2022  Owners Manual 06
6-55
Do not let your parking brake freeze
Under some conditions your parking 
brake can freeze in the engaged position. 
This is most likely to happen when there 
is an accumulation of snow or ice

Page 428 of 530

HYUNDAI GENESIS G70 2022  Owners Manual Emergency Situations
8-4
Jump starting can be dangerous if done 
incorrectly. Follow the jump starting 
procedure in this section to avoid serious 
injury or damage to your vehicle. If in 
doubt about

Page 429 of 530

HYUNDAI GENESIS G70 2022  Owners Manual 08
8-5
Jump starting procedure
 Information
Your vehicle has a battery in the luggage 
compartment, but when you jump start 
your vehicle, use the jumper terminal in 
the engine compartment.
1.  Posit

Page 430 of 530

HYUNDAI GENESIS G70 2022  Owners Manual Emergency Situations
8-6
10. Start the engine of the assisting 
vehicle and let it run at approximately 
2,000 RPM for a few minutes. Then 
start your vehicle.
11. Keep your vehicle operating for at

Page 482 of 530

HYUNDAI GENESIS G70 2022  Owners Manual 09
9-29
 WARNING
To prevent SERIOUS INJURY or DEATH 
to you or bystanders, always follow 
these precautions when working near 
or handling the battery:
Always read and follow 
instructions carefully w

Page 483 of 530

HYUNDAI GENESIS G70 2022  Owners Manual Maintenance
9-30
Battery Usage 
Recommendations
[�Keep the battery securely mounted.
[�Keep the battery top clean and dry.
[�Keep the terminals and connections 
clean, tight, and coated with 
pe
Page:   1-8 9-16 next >