2022 HYUNDAI ELANTRA ECO mode
[x] Cancel search: ECO modePage 136 of 584
Instrument Cluster
4-50
8. Other
Items Explanation
Reset fuel
economy[ At vehicle start : This displays the average fuel economy after
restarting.
[ After refueling : This displays the average fuel economy after
refueling.
[ Manually : You can calculate the accumulated average fuel
economy manually.
Fuel Econ.
Reset[ Off: The average fuel economy will not reset automatically
whenever refueling.
[ After ignition: When the engine has been OFF for 4 hours or longer
the average fuel economy will reset automatically.
[ After refueling: The average fuel economy will reset automatically
after adding 6 liters (1.6 gallons) of fuel or more and after driving
speed exceeds 1 km/h (1 mph).
For more details, refer to “Trip Computer” in this chapter.
Speed Unit
(if equipped)To select the speed unit. (km/h, MPH)
Fuel Econ.
UnitTo select the fuel economy unit. (km/L, L/100km, MPG)
Temperature
UnitTo select the temperature unit. (°C,°F)
Tire Pressure
UnitTo select the tire pressure unit. (psi, kPa, bar)
9.
Language (if equipped)
Items Explanation
LanguageChoose the language. You can choose the language in infotainment
system. (if equipped)
10. Reset
Items Explanation
ResetYou can reset the menus in the User Settings Mode. All menus in the
User Settings Mode are reset to factory settings, except language and
service interval.
Page 140 of 584
Convenient Features
5-4
Remote Key (if equipped)
OIG046001OIG046001
Your HYUNDAI uses a remote key, which
you can use to lock or unlock the driver
and passenger doors or the rear trunk.
(1) Door Lock
(2) Door Unlock
(3) Trunk Unlock
(4) Panic
Locking your vehicle
To lock your vehicle:
1. Make sure all doors, the engine hood
and the trunk are closed.
2. Press the Door Lock button (1) on the
remote key to lock all doors.
3. The doors will lock and the hazard
warning lights will blink.
4. Make sure the doors are locked by
checking the position of the door lock
button inside the vehicle.
WARNING
Do not leave the keys in your
vehicle with unsupervised children.
Unattended children could place the
key in the ignition switch and may
operate power windows or other
controls, or even make the vehicle
move, which could result in serious
injury or death.
Unlocking your vehicle
To unlock your vehicle:
1. Press the Door Unlock button (2) on
the remote key.
2. The driver’s door will unlock. The
hazard warning lights will blink two
times.
• Two press unlock setting:
If you press the Door Unlock button
on the remote key again within
four seconds, then all the doors will
unlock.
Two press unlock setting can be
changed according to owner’s
preference in the cluster User Settings
mode.
• User settings mode method:
Select or deselect the ‘Two Press
Unlock’ feature in the User Settings
mode on the cluster LCD display (User
Settings Ÿ Door Ÿ Two Press Unlock).
Information
$ I W H U X Q O R F N L Q J W K H G R R U V W K H G R R U V Z L O O
D X W R P D W L F D O O \ U H O R F N D I W H U V H F R Q G V
X Q O H V V D G R R U L V R S H Q H G
ACCESSING YOUR VEHICLE
CN7 HMA 5.indd 5-42020-12-03 9:20:41
Page 141 of 584
05
5-5
Trunk unlocking
To unlock the trunk :
1. Press and hold the Trunk Unlock
button (3) on the remote key for more
than one second.
2. The hazard warning lights will blink
two times and the trunk will be
unlocked.
3. Once the trunk is opened and then
closed, the trunk will automatically
lock.
Information
7 K H Z R U G ³ + 2 / ' ´ L V Z U L W W H Q R Q W K H
E X W W R Q W R L Q I R U P \ R X W K D W \ R X P X V W S U H V V
D Q G K R O G W K H E X W W R Q I R U P R U H W K D Q R Q H
V H F R Q G
Panic button
Press and hold the Panic button (4) for
more than one second. The horn sounds
and hazard warning lights flash for about
30 seconds.
To cancel the panic mode, press any
button on the remote key.
Start-up
For information, refer to the “Key
Ignition Switch” section in chapter 6.
NOTICE
To prevent damaging the remote key:
• Keep the remote key away from
water or any liquid and fire. Internal
circuits may malfunction if the inside
of the remote key gets damp (from
liquids or moisture) or if it is heated.
This can exclude the remote key from
being covered under warranty.
• Avoid dropping or throwing the
remote key.
• Protect the remote key from extreme
temperatures.
Mechanical key
OIG046004OIG046004
If the remote key does not operate
normally, you can lock or unlock the
driver’s door by using the mechanical
key.
To unfold the mechanical key, press the
release button on the remote.
To return the key to its stored position,
press the release button and fold the key
back into the remote.
Remote key precautions
The remote key will not work if any of the
following occur:
• The key is in the ignition switch.
• You exceed the operating distance
limit (about 33 feet [10 m]).
• The remote key battery is weak.
• Other vehicles or objects may be
blocking the signal.
• The weather is extremely cold.
• The remote key is close to a radio
transmitter such as a radio station or
an airport which can interfere with
normal operation of the remote key.
If the remote key does not work
correctly, open and close the door
with the mechanical key. If you have a
problem with the remote key contact an
authorized HYUNDAI dealer.
CN7 HMA 5.indd 5-52020-12-03 9:20:41
Page 145 of 584
05
5-9
Unlocking your vehicle
(When the Two Press Unlock feature
is off)
„ „Button typeButton type
OCN7050078OCN7050078
„ „Touch sensor typeTouch sensor type
OCN7050093NOCN7050093N
1. Make sure you have the smart key in
your possession.
2. Press the Door Unlock button (2) on
the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors.
3. All of the doors will unlock. When the
doors unlock, the hazard warning
lights will blink two times.
• The door handle button will only
operate when the smart key is within
28~40 inches (0.7~1 m) from the
outside door handle.
• If you do not open the door after
unlocking within 30 seconds, it will
return to the lock mode.
• If you unlocked the door with the door
handle, the doors cannot be locked
with the sensor for up to 2 seconds.
Unlocking your vehicle
(When the Two Press Unlock feature
is on)
1. Make sure you have the smart key in
your possession.
2. Press the Door Unlock button (2) on
the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors.
3. The driver’s door will unlock.
4. If you press the button on the front
door handle or touch the door unlock
sensor inside of the front door handle
to unlock the doors within 4 seconds,
all of the doors unlock. When the
doors unlock, the hazard warning
lights will blink two times.
• The door handle button will only
operate when the smart key is within
28~40 inches (0.7~1 m) from the
outside door handle.
• If you do not open the door after
unlocking within 30 seconds, it will
return to the lock mode.
• The factory default setting is in off
mode so you should set in the User’s
Settings mode.
• If you unlocked the door with the door
handle, the doors cannot be locked
with the sensor for up to 2 seconds.
CN7 HMA 5.indd 5-92020-12-03 9:20:42
Page 146 of 584
Convenient Features
5-10
Two Press Unlock Feature
The priority for unlocking the driver door
only, or unlocking all the doors with
one press may be adjusted in the User
Settings mode in the cluster LCD display.
The Two Press Unlock feature, when
enabled, will require the user to press
the door unlock button once for driver
door only and twice for unlocking all the
doors.
Select or Deselect the Two Press Unlock
feature in the User Settings mode in the
cluster LCD display. The option can be
found under the following menu:
User Settings Ÿ Door Ÿ Two Press Unlock
Information
, I \ R X S U H V V W K H I U R Q W S D V V H Q J H U R X W V L G H
G R R U K D Q G O H Z L W K W K H V P D U W N H \ L Q \ R X U
S R V V H V V L R Q D O O W K H G R R U V Z L O O X Q O R F N
Trunk opening
To open:
1. Make sure you have the smart key
in your possession and either press
inside the trunk emblem or press the
Trunk Unlock button (3) on the smart
key for more than one second.
2. Once the trunk is opened, the hazard
warning lights will blink two times.
• The trunk handle button will only
operate when the smart key is within
28~40 inches (0.7 ~1 m) from the trunk
handle.
• Once the trunk is opened and then
closed, the trunk will automatically
lock.
Panic button
Press and hold the Panic button (4) for
more than one second. The horn sounds
and hazard warning lights flash for about
30 seconds. To cancel the panic mode,
press any button on the smart key.
CN7 HMA 5.indd 5-102020-12-03 9:20:42
Page 155 of 584
![HYUNDAI ELANTRA 2022 Owners Manual 05
5-19
6 W D U W X S Z L W K L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Eng](/manual-img/35/41167/w960_41167-154.png "HYUNDAI ELANTRA 2022 Owners Manual 05
5-19
6 W D U W X S Z L W K L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Eng")
05
5-19
6 W D U W X S Z L W K ' L J L W D O . H \
1. After placing your registered
smartphone onto the interior
authentication pad (wireless charger),
step on the brake and press the
Engine Start/Stop button.
2. After start-up, the digital key data
will be automatically updated. It
takes 5 to 20 seconds, after that, the
smartphone will go into the wireless
charging mode automatically. Once
the engine is started, you may remove
the smartphone from the pad.
OCN7050070OCN7050070
[A] : Wireless Charging Pad (In-vehicle Authentication
Pad)
Information
$ I W H U U H F R Q Q H F W L Q J W K H Y H K L F O H E D W W H U \
S R Z H U V X S S O \ R U F K D U J L Q J W K H E D W W H U \ L W
P D \ W D N H W L P H W R R S H U D W H G X H W R U H P R W H
U H Q H Z D O R I V H F X U L W \ L Q I R U P D W L R Q : K H Q \ R X
O R F N R U X Q O R F N W K H G R R U Z L W K 1 ) & S O H D V H
W R X F K D Q G K R O G \ R X U V P D U W S K R Q H R Q W K H
G R R U K D Q G O H X Q W L O L W Z R U N V
: K H Q W K H P R E L O H G D W D F R Q Q H F W L R Q R I W K H
V P D U W S K R Q H L V Z H D N W K H U H P R W H U H Q H Z D O
R I V H F X U L W \ L Q I R U P D W L R Q P D \ I D L O , Q W K L V
F D V H \ R X V K R X O G O R F N X Q O R F N R U W X U Q R Q
W K H Y H K L F O H Z L W K W K H F D U G N H \ : K H Q \ R X
D U H L Q W K H S O D F H Z K H U H W K H P R E L O H G D W D
F R Q Q H F W L R Q R I \ R X U V P D U W S K R Q H L V D Y D L O D E O H
D Q G S O D F H \ R X U V P D U W S K R Q H R Q W K H L Q W H U L R U
D X W K H Q W L F D W L R Q S D G Z L U H O H V V F K D U J H U D Q G
V W D U W X S \ R X U Y H K L F O H R U W R X F K W K H G L J L W D O
N H \ R Q W K H G R R U K D Q G O H W R O R F N R U X Q O R F N
W K H G R R U W K H U H P R W H U H Q H Z D O R I V H F X U L W \
L Q I R U P D W L R Q V W D U W V D X W R P D W L F D O O \ ( Y H Q
W K R X J K W K H H Q J L Q H L V W X U Q H G R Q S O H D V H
Z D L W X Q W L O W K H U H P R W H U H Q H Z D O S U R F H V V
L V F R P S O H W H G D Q G Z L U H O H V V F K D U J H U L V
F R Q Y H U W H G W R F K D U J L Q J P R G H
CAUTION
The engine can be turned on if the
registered smartphone or card key is
placed on the interior authentication
pad (wireless charger). Do not leave
unsupervised children or people who
are not aware of the system since it
can result in serious injury or death.
Always have the registered digital key
(smartphone) or card key with you to
prevent vehicle theft when leaving the
vehicle.
For more information, refer to the
Engine Start/Stop button in chapter 6.
CN7 HMA 5.indd 5-192020-12-03 9:20:44
Page 157 of 584
05
5-21
Remote Start with Digital Key
• When the shift lever of your vehicle
is in P (Park) and all of the doors
including trunk and hood is locked
and the vehicle is off, press the Door
Lock button in the Hyundai Digital
Key app then press the Remote Start
button within 4 seconds.
You can confirm the engine is on if the
hazard warning lights blinks two times
and the chime sounds.
• If you want to turn off the engine,
press Remote Engine Stop. Air
Conditioner / Heating system
maintains the same status as when
you last used the vehicle.
• Unless you put the registered digital
key(smartphone) on the interior
authentication pad (wireless charger)
when the remote start function is on,
the engine will turn off.
• If you do not get into the vehicle
within 10 minutes after the engine
turns on, the vehicle will turn off.
For more information, refer to the Engine
Start/Stop button in chapter 6.
Vehicle information Display
The digital key application displays
the vehicle information such as
driving or door conditions through the
communication with the vehicle.
• How to check : Select the vehicle
what you want to check and touch
the vehicle image, then vehicle
information display page will be
shown.
• Contents : accumulated odometer,
latest fuel economy, driving range,
fuel remaining, tire pressure, doors
lock/unlock status and last data
updated time.
ÃDisplayed vehicle data could be
differed from the current vehicle
condition.
ÃFor more information, please refer to
the ‘Tutorial’ on your Digital key app. 6 P D U W S K R Q H F K D Q J H $ S S G H O H W L R Q
If you change your smartphone or delete
the Hyundai Digital Key App, please refer
to the following to set up your Digital
Key:
Smartphone Change/ Reset
If you change or reset the smartphone,
the registered digital key in your previous
smartphone may not be used. Please
refer to following procedure to use the
digital key.
1. Install the digital key application and
log in.
2. If you are the owner, retry the Digital
key save process.
3. If you are the sharer, need to re-share
the key from owner.
App delete & reinstall/ Delete App data
You can re-download the digital key from
the server and follow these procedures.
1. Reinstall the application and log in.
2. Input the PIN number for user
verification.
3. If PIN is correct, digital key data
will be re-downloaded to your
smartphone and you can use it
without any further registration or
sharing.
Smartphone operability with Digital Key
The digital key application may not be
available to older type smartphones.
Please check the available smartphone
models with your dealer. NFC antenna
position on the smartphone can be
confirmed on each smartphone’s manual
or contact to customer service center of
the smartphone manufacturer.
CN7 HMA 5.indd 5-212020-12-03 9:20:45
Page 179 of 584
05
5-43
WARNING
Before programing HomeLink® to a
garage door opener or gate operator,
make sure people and objects are out
of the way of the device to prevent
potential harm or damage. Do not
use the HomeLink® with any garage
door opener that lacks the safety
stop and reverse features required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an
object - signaling the door to stop and
reverse - does not meet current U.S.
federal safety standards. Using a garage
door opener without these features
increases the risk of serious injury or
death.
3 U R J U D P L Q J + R P H / L Q N Š
Please note the following:
• When programing a garage door
opener, it is advised to park the
vehicle outside of the garage.
• It is recommended that a new battery
be placed in the hand-held transmitter
of the device being programed to
HomeLink® for quicker training and
accurate transmission of the radio-
frequency signal.
• Some vehicles may require the
Engine Start/Stop button to be in
the ACC (or “Accessories”) position
for programing and/or operation of
HomeLink®.
• In the event that there are still
programing difficulties or questions
after following the programing steps
listed below, contact HomeLink® at:
www.homelink.com, www.youtube.
com/HomeLinkGentex or by calling
1-800-355-3515.
3 U R J U D P L Q J
To program most devices, follow these
instructions:
OCN7050085NOCN7050085N
1. Press and release (1), (2) or (3) button.
• If the indicator (4) is turned ON in
Orange, go to Step 3) since it is a
new programing.
• If the indicator (4) is continuously
turned ON or flashes in Green rapidly
several times, go to Step 2) since it is
a programed button.
2. Press and hold the button you wish
to program for approximately 15-
25 seconds until the LED flashes in
Orange for several times.
3. Hold the Garage Door Opener Original
Transmitter near the HomeLink Mirror.
CN7 HMA 5.indd 5-432020-12-03 9:20:48