09
9-43
v
 Cartridge type v
 Blade type
v
 Multi fuseNormal Blown
Normal Blown
Normal Blown
OTM078035OTM078035
A vehicle’s electrical system is protected 
from electrical overload damage by 
fuses.
This vehicle has 2 (or 3) fuse panels, one 
located in the driver’s side panel bolster, 
the other in the engine compartment 
near the battery.
If any of your vehicle’s lights, 
accessories, or controls do not work, 
check the appropriate circuit fuse. If a 
fuse has blown, the element inside the 
fuse will be melted or broken.
If the electrical system does not work, 
first check the driver’s side fuse panel. 
Before replacing a blown fuse, turn the 
engine and all switches off, and then 
disconnect the negative battery cable. 
Always replace a blown fuse with one of 
the same rating.
If the replacement fuse blows, this 
indicates an electrical problem. 
Avoid using the system involved and 
immediately consult an authorized 
HYUNDAI dealer.
 WARNING
NEVER replace a fuse with anything but 
another fuse of the same rating.
• A higher capacity fuse could cause 
damage and possibly cause a fire.
• Do not install a wire or aluminum 
foil instead of the proper fuse - 
even as a temporary repair. It may 
cause extensive wiring damage and 
possibly a fire.
NOTICE
Do not use a screwdriver or any other 
metal object to remove fuses because 
it may cause a short circuit and damage 
the system.
FUSES
CN7 HMA 9.indd   9-432020-12-03      9:42:26 
         
        
        Maintenance
9-44
 Instrument Panel Fuse 
Replacement
OCN7080017OCN7080017
1.  Turn the vehicle off.
2.  Turn all other switches OFF.
3.  Open the fuse panel cover.
4.  Refer to the label on the inside of 
the fuse panel cover to locate the 
suspected fuse location.
OCN7080018OCN7080018
5.  Pull the suspected fuse straight out. 
Use the removal tool provided in the 
engine compartment fuse panel.
6.  Check the removed fuse; replace it if 
it is blown. Spare fuses are provided in 
the engine compartment fuse panel.
7.  Push in a new fuse of the same 
rating, and make sure it fits tightly in 
the clips. If it fits loosely, consult an 
authorized HYUNDAI dealer.
In an emergency, if you do not have a 
spare fuse, use a fuse of the same rating 
from a circuit you may not need for 
operating the vehicle.
If the other electrical components do 
not work and the fuses are undamaged, 
check the fuse panel in the engine 
compartment. If a fuse is blown, it must 
be replaced with the same rating.
If the headlamp, turn signal lamp, tail 
lamp, interior lamp doesn’t work and 
the fuses are undamaged, consult an 
authorized HYUNDAI dealer.
CN7 HMA 9.indd   9-442020-12-03      9:42:27