2022 HYUNDAI ELANTRA N warning

Driver Assistance System7-36
Safe Exit Warning Operation
Warning
OCN7N071151OCN7N071151
OCN7N071101LOCN7N071101L
Collision Warning when exiting vehicle
• When an approaching vehicle from the r
ear is detected at the moment a
door is opened, the ‘Watch (out) for
traffic’ warning message will appear
on the cluster, and an audible warning
will sound.
• Safe Exit Warning will warn the driver when your vehicle speed is below 2
mph (3 km/h), and the speed of the
approaching vehicle from the rear is
above 3 mph (5 km/h).
WARNING
Take the following precautions when
using Safe Exit Warning:
• For your safety, only change the
Settings after parking the vehicle at a
safe location.
• If any other system’s warning
message is displayed or audible
warning is generated, Safe Exit
Warning's warning message may not
be displayed and audible warning
may not be generated.
• You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy.
• Safe Exit Warning does not operate
in all situations and cannot prevent
all collisions.
• Safe Exit Warning may warn the
driver late or may not warn the driver
depending on the road and driving
conditions. Always check vehicle
surroundings.
• The driver and passengers are
responsible for accidents that occur
while exiting the vehicle. Always
check the surroundings before you
exit the vehicle.
• Never deliberately operate Safe
Exit Warning. Doing so may lead to
serious injury or death.
• Safe Exit Warning does not operate
if there is a problem with Blind- Spot
Collision-Avoidance Assist. The
warning message of Blind- Spot
Collision-Avoidance Assist will
appear when:
- Blind- Spot Collision-Avoidance
Assist sensor or the sensor
surrounding is polluted or covered
- Blind- Spot Collision-Avoidance
Assist fails to warn passengers or
falsely warn passengers
CN7 N HMA 7.indd 7-36 2021-09-14  9:44:43

07
7-37
Information
• After the engine is turned off, Safe Exit
Warning operates approximately for 3
minutes, but turns off immediately if
the doors are locked.
• Images or colors may appear
differently depending on the instrument
panel specifications or theme.
Safe Exit Warning Malfunction
and Limitations
Safe Exit Warning malfunction
OTM070099NOTM070099N
When Safe Exit Warning is not working
properly, the ‘Check Blind-Spot Safety
system’ warning message will appear on
the cluster for several seconds, and the
master (
) warning light will illuminate
on the cluster. If the master warning light
illuminates, have the vehicle inspected
by an authorized HYUNDAI dealer.
CN7 N HMA 7.indd 7-37 2021-09-14  9:44:44

Driver Assistance System7-38
OTM070100NOTM070100N
When the side view mirror warning
light is not working properly, the ‘Check
side view mirror warning light’ warning
message will appear on the cluster
for several seconds, and the master
(
) warning light will illuminate on
the cluster. If the master warning light
illuminates, have the vehicle inspected
by an authorized HYUNDAI dealer.
Safe Exit Warning disabled
OCN7N071098LOCN7N071098L
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain,
or installing a trailer or carrier, it can
reduce the detecting performance and
temporarily limit or disable Safe Exit
Warning.
If this occurs, the ‘Blind-Spot Safety
system disabled. Radar blocked’ warning
message will appear on the cluster.
Safe Exit Warning will operate properly
when such foreign material or trailer,
etc., is removed, and then the engine is
restarted.
If Safe Exit Warning does not operate
properly after it is removed, have the
vehicle inspected by an authorized
HYUNDAI dealer.
CN7 N HMA 7.indd 7-38 2021-09-14  9:44:44

07
7-39
WARNING
• Even though the warning message
does not appear on the cluster,
Safe Exit Warning may not properly
operate.
• Safe Exit Warning may not properly
operate in an area (for example,
open terrain) where any objects are
not detected right after the engine
is turned on, or when the detecting
sensor is blocked with foreign
material right after the engine is
turned on.
CAUTION
Turn off Safe Exit Warning to install
or remove a trailer, carrier, or
another attachment. Turn on Safe
Exit Warning when finished. Limitations of Safe Exit Warning
Safe Exit Warning may not operate
properly, or it may operate unexpectedly
under the following circumstances:
• Getting out of the vehicle where trees
or grass are overgrown
• Getting out of the vehicle where the road is wet
• The approaching vehicle is very fast or very slow
Information
For more details on the limitations of the
rear corner radar, refer to “Blind- Spot
Collision-Avoidance Assist (BCA)” section
in this chapter.
WARNING
• Safe Exit Warning may not operate
properly if interfered by strong
electromagnetic waves.
• Safe Exit Warning may not operate
for 3 seconds after the vehicle is
started, or the rear corner radars are
initialized.
CN7 N HMA 7.indd 7-39 2021-09-14  9:44:45

Driver Assistance System7-42
Temporarily pausing Manual Speed
Limit Assist
OCN7N071133L OCN7N071133L
Push the switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Manual Speed
Limit Assist enabled (
) indicator
will stay on.
Resuming Manual Speed Limit Assist
OCN7N071132L OCN7N071132L
To resume Manual Speed Limit Assist
after Manual Speed Limit Assist was
paused, push the +, - switch or

button.
If you push the + switch up or – switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the
button, vehicle
speed will resume to the preset speed.
Turning off Manual Speed Limit
Assist
OCN7N071006 OCN7N071006
Press the Driving Assist button to turn
Manual Speed Limit Assist off. The
Manual Speed Limit Assist enabled
(
) indicator will go off.
WARNING
Take the following precautions when
using Manual Speed Limit Assist:
• Always set the vehicle speed under
the posted speed limit.
• Keep Manual Speed Limit Assist off
when the function is not in use, to
avoid inadvertently setting a speed.
Check that the Manual Speed Limit
Assist enabled (
) indicator is
off.
• Manual Speed Limit Assist does
not substitute for proper and safe
driving. It is the responsibility of
the driver to always drive safely
and should always be aware of
unexpected and sudden situations
from occurring. Pay attention to the
road conditions at all times.
CN7 N HMA 7.indd 7-42 2021-09-14  9:44:46

07
7-43
DRIVER ATTENTION WARNING (DAW)
Basic function
Driver Attention Warning can help
determine the driver's attention level
by analyzing driving pattern and driving
time while the vehicle is driven. Driver
Attention Warning will recommend a
break when the driver’s attention level
falls below a certain level.
Leading Vehicle Departure Alert
function
Leading Vehicle Departure Alert function
will inform the driver when a detected
vehicle in front departs from a stop.
Detecting sensor
OCN7N071001NOCN7N071001N[1] : Front view camera
The front view camera is used to help
detect driving patterns and front vehicle
departure while vehicle is being driven.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Always keep the front view camera in
good condition to maintain optimal
performance of Driver Attention
Warning.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
Driver Attention Warning
Settings
Setting features
OCN7N071102LOCN7N071102L
Driver Attention Warning
With the engine on, select or deselect
‘Driv
er Assistance → Driver Attention
Warning (or DAW (Driver Attention
Warning))’ from the Settings menu to set
whether or not to use each function.

- If ‘Inattentive Driving Warning’ (or
‘Swaying warning’) is selected, Driver
Attention Warning will inform the
driver the driver’s attention level and
will recommend taking a break when
the level falls below a certain level.
OCN7N071103LOCN7N071103L
Leading Vehicle Departure Alert
-
If ‘Leading Vehicle Departure Alert’ is selected, the function will inform the
driver when a detected vehicle in front
departs from a stop.
CN7 N HMA 7.indd 7-43 2021-09-14  9:44:47

Driver Assistance System7-44
Driving Safety Auto Off in N mode
OCN7N071090LOCN7N071090L
With the engine on, select ‘Driver
Assistance → Driving Safety Off in N
mode’ from the Settings menu to set
whether to use the function. - If ‘Driving Safety Off in N mode’ is selected, Driver Attention Warning
turns off automatically when N mode
is selected.
- If ‘Driving Safety Off in N mode’ is deselected, Driver Attention Warning
does not turn off automatically even
when N mode is selected.
Information
If the engine is restarted, Driver Attention
Warning will maintain the last setting.
OCN7N071091LOCN7N071091L
Warning Timing
With the engine on, select ‘Driver
Assis
tance → Warning Timing’ from the
Settings menu to change the initial
warning activation time for Driver
Attention Warning.
When the vehicle is first delivered,
Warning Timing is set to ‘Standard’. If you
change the Warning Timing, the Warning
Timing of other Driver Assistance
systems may change.
CN7 N HMA 7.indd 7-44 2021-09-14  9:44:48

07
7-45
Driver Attention Warning
Operation
Basic function
Display and warning
The basic function of Driver Attention
W
arning is to inform the driver of their
‘Attention Level’ and to warn the driver to
‘Consider taking a break’.
Attention Level
Function offFunction offStandbyStandby
OUS4071053LOUS4071053LOTM070106NOTM070106N
Attentive drivingAttentive drivingInattentive drivingInattentive driving
OSU2B071088OSU2B071088OCN7N071155NOCN7N071155N
• The driver can monitor his/her driving conditions on the cluster.

- When the ‘Inattentive Driving
Warning’ is deselected from the
Settings menu, ‘System Off’ is
displayed.

- Driver Attention Warning will
operate when the vehicle speed is
between 0-110 mph (0-180 km/h).
- When the vehicle speed is not within the operating speed,
the message ‘Standby’ will be
displayed. • The driver’s attention level is displayed
on the scale of 1 to 5. The lower the
level is, the more inattentive the driver
is.
• The level decreases when the driver does not take a break for a certain
period of time.
Taking a break
OUS4071057LOUS4071057L
• The ‘Consider taking a break’ message will appear on the cluster and an
audible warning will sound to suggest
that the driver take a break, when the
driver’s attention level is below 1.
• Driver Attention Warning will not suggest a break when the total driving
time is shorter than 10 minutes or 10
minutes has not passed after the last
break was suggested.
WARNING
For your safety, only change the
Settings after parking the vehicle at a
safe location.
CN7 N HMA 7.indd 7-45 2021-09-14  9:44:48