2022 CITROEN E-MEHARI tyre pressure

2
.
.
Driving recommendations 50
Driving your E-MEHARI 5 0
Starting/Switching off the vehicle

5
1Maintaining and servicing your E-MEHARI
5

7
Washing precautions
5
7
Charging socket panel (access to the charging socket)
5
8
Charging your E-MEHARI
5
8
Under the bonnet
6
4
Hibernation mode
6
6
Audio system
6
7
Temporary puncture repair kit
6
9
Replacing a bulb
6
9
Replacing a fuse
7
0
Identification markings/VIN
7
2
Technical characteristics
7
2
Dimensions/ Weights

73
Tyres/Tyre pressures
7
4
Performance

75
Brakes and suspension
7
6
Braking system
7
6
Instrument panel

7
I

nstruments and indicators

on your E-MEHARI

8
R

FID personal key ring

1

0
Central locking

1

0
D o o r s


11
Boot floor hatch

1

2
Soft Top

1

2
Front windows

1

5
Rear quarter panels
1

6
Rear screen

1

6
Boot flap

1

7
Hard Top

1

8
Removing a

roof panel

1

8
Front windows

1

9
Rear quarter panels
1

9
Rear screen

2

0
Boot flap and rear screen

2

0
Adjusting the driver's seat
and the passenger's seat
2

2 Exterior lighting and signalling
3

1
Wipers/Screenwash
33
G
eneral safety recommendations
3
4
High voltage safety
3
5
Anti-theft protection/Electronic immobiliser
3
6
Assistance call
3
6
ABS – ESP
3
6
Seat belts
3
7
Airbags

39
Child seats
4
2
Deactivating the passenger's front airbag
4
3
ISOFIX mountings (child seats)
4
7
Installation of a child seat compatible with the ISOFIX standard
4
7
Visual indicators
4
8
Horns and audible warnings
4
9
Over view
Dashboard instruments
Access
Ease of use and comfort Safety
Driving Practical information
In the event of a
breakdown
Technical data
Alphabetical index
Lighting and visibility
Instruments and controls 3
P resentation of your E-MEHARI 3F
ront head restraints
2
3
Access to the rear seats
2
3
Folding rear bench seat 2 4
Steering wheel (adjustment) 2 4
Mirrors

2
5
Ventilation/Heating
2

6
Air conditioning (optional)

2
8
Interior lighting
2

9
Interior fittings

3
0Control pedals

5
2
Manual parking brake
5
3
Drive selector 5 4
Electric power steering system 5 4
Tyre under-inflation detection

5
5
Contents

55
Tyre under-inflation
detection
System which automatically checks the
pressures of the tyres while driving.
The system monitors the pressure in all four
tyres, once the vehicle is moving.
The system triggers an alert as soon as it
detects a drop in the pressure of one or more
tyres.
The tyre under-inflation detection system
does not replace the need for vigilance on
the part of the driver.
This system still requires you to check the
tyre inflation pressure (including the spare
wheel, where fitted) every month as well
as before a
long journey.
Driving with under-inflated tyres impairs
handling, extends braking distances and
causes premature tyre wear, particularly
in adverse conditions (heavy loads, high
speeds, long journeys).
Driving with under-inflated tyres
increases energy consumption. The tyre pressure specifications for your
vehicle can be found on the tyre pressure
label.
For more information on the
Identification markings
, refer to the
corresponding section.
Tyre pressures should be checked when
the tyres are "cold" (vehicle stopped for
1
hour or after a journey of less than
6
miles (10 km) at moderate speeds).
Other wise (when hot), add 0.3
bar to the
pressures shown on the label.
Under-inflation alert
It is indicated by this warning lamp
coming on, fixed. F
Reduce speed immediately, avoid excessive
steering movements and sudden braking.
F Stop as soon as possible, when traffic
conditions allow.
The loss of pressure detected does not
always cause visible bulging of the tyre.
Do not rely on a simple visual check.
F If you have a compressor (such as the
one in the temporary puncture repair kit),
check the pressures of the four tyres when
cold. If it is not possible to make this check
immediately, drive carefully at reduced
speed.
or
F In the event of a
puncture, use the
temporary puncture repair kit.
The alert is kept active until the system is
reinitialised.
6
Driving

56
Reinitialisation
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the tyre
pressure label.
The under-inflation detection system
does not give a
warning if a pressure is
incorrect at the time of reinitialisation.
The system must be reinitialised with the
ignition on and the vehicle stationary, via the
vehicle's configuration menu, in Advanced
settings.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
Driving

69
Temporary puncture
repair kit
Access to the repair kit
Your E-MEHARI's puncture repair kit is located
under the boot floor hatch.
The boot floor hatch is opened with the grip
located at the left-hand side of the boot floor
(only if your E-MEHARI is unlocked using your
personal RFID key ring).
Using the repair kit
Refer to the instructions provided with the
compressor.Never remove from a
tyre a foreign body
that has caused a puncture.
The sealant product contained in the
compressor is toxic and is an irritant.
Never ingest it, never spray it onto the
body, face or eyes. If it is ingested, call the emergency services
immediately (fire service, ambulance, etc.) or
go to a


hospital's emergency department.
If it enters the eyes, wash with abundant
clean water and consult a doctor without
d e l ay.
If the symptoms persist, consult a specialist.
Keep the sealant product out of the reach
of children.
Do not simply throw the old cartridge
away after use; take it to your CITROËN
authorised repairer or to a waste recovery
organisation that specialises in this type
of product.
Once the tyre has been repaired, go
to a
CITROËN authorised repairer or
a
qualified professional as soon as
possible.
If you are unable to obtain the desired
pressure after a
few minutes of operation
of the compressor, this means that the
tyre cannot be repaired.
Contact CITROËN ASSISTANCE who will
send a


roadside recovery agent.
Replacing a bulb
All maintenance on the vehicle's lamps must be
carried out by a
CITROËN authorised repairer
or a


qualified professional.
If a
headlamp has to be replaced on your
E-MEHARI: go to a
CITROËN authorised
repairer or a qualified professional.
8
In the event of a breakdown

71
Fuse allocations in the
passenger compartment
The presence of certain fuses depends on the
specification level of the vehicle.Fuse N°
RatingName
F1 7. 5 A+12 V BAT rear foglamp
F6 5 A+12 V BAT (TPMS) tyre pressures monitoring system ECU
F7 7. 5 A+12 V BAT anti-theft – IER telemetry box
F8 20 A +12 V BAT radio – setma – bluebox
F11 5 A+12 V BAT passenger compartment ECU (BCM)
F12 7. 5 A+12 V CTR relay – door CTR signal
F13 5 A+12 V BAT dashboard
F14 15 A+12 V BAT horns
F16 7. 5 A+12 V BAT passenger compartment ECU (BCM) – DIAG socket
F19 5 ALeft-hand brake lamp (EU only)
F20 5 ARight-hand brake lamp (EU only)
F21 10 A+12 V switched, brake lamps + third lamp
F23 5 A+12 V switched, passenger compar tment cooling fan unit (GMV)
F24 15 A+12 V switched, 12 V accessory socket
F27 5 A+12 V switched parking sensors (option)
F28 20 A +12 V switched, radio – setma – bluebox
F29 5 A+12 V switched, aerial amplifier
F31 5 A+12 V switched, airbag control unit
F32 5 A+12 V switched, IER telemetry box
F34 5 A+12 V switched, motor management ECU (UCM)
F35 5 A+12 V switched, ABS/ESP
F36 7. 5 A+12 V switched, illumination of switches ECU – diagnostic socket
F38 7. 5 A+12 V switched, high voltage battery – super visor
F40 7. 5 A+12 V switched, electric power steering ECU
8
In the event of a breakdown

74
Tyres/Tyre pressures
Tyres fitted to your E- MEHARISize 185/65


R15
Ty p e "Cross Climate" or
equivalent
Brand Michelin
Spare wheel None (temporary
puncture repair kit)
Tyre pressures Front 2.4
bar
/Rear 2.4
barCheck the tyre pressures regularly and
always obser ve the inflation pressures
indicated above.
Low tyre pressures can cause premature
wear of the tyres and introduce the risk of
the tyres bursting.
The tyre pressures must be regularly
checked with the tyres cold, and adjusted
if necessary.
Replace worn tyres only by tyres of the
same model as the original fitment, or
equivalent, and have them fitted by a
tyre
fitting specialist.
The responsibility for having the correct
tyre pressures lies with the driver.
Never exceed the speed rating or load
index of the tyres fitted to the vehicle.
It is for the driver to check the wear of the
tyres using the wear indicators in the tyre
tread.
Weights
Weights of your E-MEHARI
Gross vehicle weight
(maximum laden weight)1,8 3 8 kg
Kerb weight 1, 4 51


kg
Exceeding the weights specified above
risks damaging your E-MEHARI and could
cause an accident and serious injuries.
The authorised weights must never be
exceeded.
Technical data

75
Performance
Performance of your E-MEHARIPower 50
kW
Maximum speed 68
mph (110 km/h)
(limited electronically)
Acceleration
0-37 mph (0- 60 km/h)7.3 seconds
Range
The vehicle's range has been type-approved to
European Regulation ECE 101R01.
In real use, several factors will vary the range
of an electric vehicle; you have some control
over these and so can make noticeable
improvements in the range.
These factors are:
-

s
peed and driving style
-
ro

ad profile
-
t

emperature settings
-
tyres
-

u
se of electrical accessories
-
v

ehicle loading
Speed and driving style
High speed reduces the range of the vehicle.
Sporty driving reduces the range of the vehicle:
adopt a smooth driving style.
Advice
-

d
rive at constant speed
-

a
dapt your driving style to avoid heavy
energy consumption
-

m
ake use of energy recovery:
anticipate the slowing of traffic early by
taking your foot off the accelerator or
by braking progressively
Road profile
On a hill, rather than trying to maintain your
s peed, do not depress the accelerator pedal
more than on level ground: rather, keep the
accelerator pedal in the same position.
Temperature settings
Using the heating or air conditioning reduces
the range of the vehicle.
Ty r e s
Low tyre pressures increase energy
consumption.
Observe the tyre pressures recommended for
your vehicle.
When replacing tyres, give preference to tyres
of the same brand, size, type and structure as
the original fitment.
Using tyres of different characteristics
significantly reduces the range of the vehicle.
Vehicle loading
Avoid carrying unnecessary loads in the
vehicle.
9
Technical data