2022 CITROEN C1 display

28
With the touch screen tablet
From the Menu page   in   the   touch   screen   tablet:
F Sel ect the " Vehicle information "
  tab.
The " Trip information "
  window   is   displayed  
w

ith   the   following   information:
-
 
"A

verage speed ",
-
 
" E

lapsed time ",
-
 
" R

ange",
-
 
t
he   current   fuel   consumption,   presented   in  
g

raphical
 fo
rm.
The " Erase "
  button   resets   the   fuel   consumption  
d

ata   in   the   touch   screen   tablet   and   the  
in

strument
 pan
el.
If your vehicle has a touch screen tablet, you
can
  view   information   on   the   current   journey.
Trip computer, a few definitions
Range
(miles or km)
T he   distance   which   can   still   be   travelled   with  
t

he   fuel   remaining   in   the   tank   (related   to   the  
a

verage   fuel   consumption   over   the   last   few  
m

iles
 (
kilometres)
 t
ravelled).
This
  value   may   vary   following   a   change  
i

n   the   style   of   driving   or   the   relief,  
r

esulting   in   a   significant   change   in   the  
c

urrent   fuel   consumption.
When
  the   fuel   level   is   low,   the   message  
"

Lo FUEL"   is   displayed.
If
  only   a   small   amount   of   fuel   is   added,   the  
r

ange   may   not   be   recalculated.
Current fuel consumption
(mpg or l/100 km or km/l)
C alculated   over   the   last   few   seconds.
Stop & Start time counter
(minutes / seconds or hours / minutes)
I f   your   vehicle   is   fitted   with   Stop   &   Start,   a   time  
c

ounter   calculates   the   time   spent   in   STOP  
m

ode   during   a   journey.
It
  resets   to   zero   every   time   the   ignition   is  
s

witched   on.
Average fuel consumption
(mpg or l/100 km or km/l)
C alculated   since   the   last   trip   computer   reset.
Average speed
(mph or km/h)
C alculated   since   the   last   trip   computer   reset.
Instruments

58
C1_en_Chap03_ergonomie-confort_ed01-2016
For maximum cooling or heating of the cabin,   it   is   possible   to   go   beyond   the  
m

inimum   14   or   maximum   28   value.
F
 
P
ress   the   temperature   adjustment  
b

utton   down   or   up   until   "LO" or
"HI"
 

is   displayed.
A
 
setting   around   21
 
gives   optimum   comfort.  
H

owever,   depending   on   your   requirements,  
a s

etting   between   18   and   24   is   normal.
On
 
entering   the   vehicle,   if   the   interior   is   very  
c

old
 
or   hot,   there   is   no   need   to   change   the  
v

alue
 
displayed   in   order   to   reach   the   required  
l

evel
 
of   comfort.   The   system   corrects   the  
t

emperature   difference   automatically   and   as  
q

uickly   as   possible.
Temperature adjustment
F Press
  this   button   downward   to  r
educe   the   value   and   upward   to  
inc

rease
 it
.
The
 
value
  indicated   in   the   screen   corresponds  
t

o
 
a
 
level
 
of   comfort   and   not   to   a   temperature   in  
d

egrees
 
Celsius   or   Fahrenheit.
Air flow adjustment
F Press this button to increase air
f low.
The
 
air
 
flow   symbol,   the   fan,   fills   progressively.
F
 
P
ress   this   button   to   decrease   air  
f

low.
Air distribution adjustment
- the   centre   and   side   air   vents,
-  t he   centre   vent,   side   air   vents   and  
f

ootwells,
-
 
t
he   footwells,
-
 
t
he   windscreen   and   footwells,
-
 
t
he   centre   vent,   side   air   vents   and  
w

indscreen,
-
 
t
he   windscreen.F
 
P
ress   this   button   repeatedly   to  
d

irect   the   air   to:
Air intake / Air recirculation
Avoid prolonged recirculation of interior a
ir   (risk   of   condensation   or   deterioration  
o

f   the   air   quality).
F
 
P
ressing   this   buttons   isolates   the  
p

assenger   compartment   from   the  
o

utside   air.  
 
T
he   air   recirculation   symbol   is  
d

isplayed.
Air
 
recirculation   enables   the   passenger
 c

ompartment   to   be   isolated   from   exterior   odours
 a

nd
 
smoke.
Press
 
this   button   again   or   press   the   "AUTO"

button
  to   resume   automatic   management   of   the
 i

ntake
 
of   air.   The   air   recirculation   symbol   goes   off.
Ease of use and comfort

59
C1_en_Chap03_ergonomie-confort_ed01-2016
Avoid driving for long periods with the air conditioning   switched   off   (risk   of   misting a

nd   reduction   of   the   air   quality   in   the   cabin).
This action switches off all of the functions of
the  air   conditioning   system.
Thermal
  comfort   is   no   longer   controlled.  
A s

light   flow   of   air   resulting   from   the   movement  
o

f   the   vehicle,   remains   perceptible   however.
Pressing
  the   "AUTO"
 
button   again   reactivates  
t

he   system   with   the   values   set   before   it   was  
s

witched   off.
Switching the system off
F Press   the   air   flow   adjustment  b
utton   until   the   fan   symbol  
d

isappears.
F
P
ress this button to stop the air
conditioning.
Air conditioning on / off
Stopping the air conditioning may cause some p roblems   (humidity,   misting).
Automatic
  operation   of   the   air   conditioning   is  
r

esumed   when   the   button   is   pressed   again.  
The "A /C "
 

symbol   is   displayed.
3
Ease of use and comfort

77
C1_en_Chap04_conduite_ed01-2016
Gear selector
ETG electronic gearbox
The five-speed ETG electronic gearbox offers a choice between the ease of automated operation o r the pleasure of manual gear changing.
R.
 R
everse:   with   your   foot   on   the   brake   pedal,  
m

ove   the   gear   selector   to   the   right   then  
f

or ward   to   select   this   position.
N.
 N

eutral:   with   your   foot   on   the   brake   pedal,  
s

elect   this   position   to   start   the   engine.
E.
 
A
utomatic   (Easy)   mode:   move   the   gear  
s

elector   back   to   select   this   mode.
M.
 M

anual   mode   with   sequential   gear  
c

hanging:   move   the   gear   selector   back  
t

hen   to   the   left   to   select   this   mode.Press
  behind   the   "+"
 s
teering
 m

ounted   control   paddle   to   change   up.
Steering mounted control paddles
The position of the gear selector (R , N, E or M )  i
s   displayed   in   the   instrument   panel.
In
  automatic   (Easy)   mode,   when   you  
t

emporarily   take   control   of   gear   changing,  
t

he   gear   engaged   is   also   displayed   in   the  
in

strument
 pan
el.
Display in the instrument panel
Press behind the "-"  steering  m
ounted   control   paddle   to   change  
d

own.
The
  steering   mounted   control   paddles  
c

annot   be   used   to   select   neutral   or   to  
e

ngage   or   come   out   of   reverse   gear.
4
Driving

79
C1_en_Chap04_conduite_ed01-2016
Temporarily taking control of
gear changes
You can temporarily take control of gear changes   using   the   "+"  and   "-" steering
 
m

ounted   control   paddles.
Gear
  change   commands   are   only   acted   on   if  
t

he   engine   speed   allows.   There   is   an   audible  
s

ignal   if   a   command   is   not   accepted.
The
  gear   engaged   is   displayed   in   the  
in

strument
 pan
el.
This function allows you to anticipate certain
situations
  such   as   overtaking   a   vehicle   or  
a

pproaching   a   corner.
After
  a   few   moments   with   no   action   on   the  
c

ontrols,   the   gearbox   returns   to   automatic  
c

ontrol   of   the   gears. It
  is   possible   to   change   mode   at   any   time,   by  
m

oving   the   gear   selector   from   position   E to
position M
  and   the   other   way   round.
Never select neutral N when the vehicle
is
  moving.
F
 
P
lace   the   gear   selector   in   position   M
.
F  
C
hange   up   or   down   using:
-  t he   gear   selector,   pushing:
-  b ack,   "+"  to   change   up,
-
 
f
or ward,   "-"
 
to   change   down.
-
 
o
r   the   "+" or "-"
 

steering   mounted  
c

ontrol   paddle.
The
  gear   engaged   is   displayed.
Gear
  change   commands   are   only   acted   on   if  
t

he   engine   speed   allows.
It is not necessary to release the accelerator
peal
  during   gear   changes.   There   is   an   audible  
s

ignal   if   a   command   is   not   accepted.
When
  braking   or   slowing   down,   the   gearbox  
a

utomatically   changes   down   so   that   pick-up   is  
i

n   the   right   gear.
Manual mode
Under sharp acceleration, the gearbox will not   change   up   without   action   by   the   driver   on  
t

he   gear   selector   or   steering   mounted   control  
p

addles   (unless   the   engine   speed   is   close   to  
m

aximum).
To
  engage   reverse,   the   vehicle   must   be  
s

tationary   with   your   foot   on   the   brake   pedal.
F

Sel
ect position R .
Reverse
There is an audible signal on engaging reverse.
4
Driving

83
C1_en_Chap04_conduite_ed01-2016
Stop & Start (VTi 68 S&S engine)
Operation
Going into engine STOP
mode
This indicator lamp comes on in the instrument   panel   and   the   engine  
g

oes   into   standby   automatically:
-
 
w

hen
  stationary,   in   neutral,   and   you  
r

elease   the   clutch   pedal.
Never
  refuel   with   the   engine   in  
S

TOP mode;   you   must   switch   off   the  
i

gnition   with   the   button.
For
  smoother   operation,   during  p
arking   manoeuvres   STOP   mode   is  n
ot   available   for   a   few   seconds   after  
c

oming   out   of   reverse   gear.
The
  Stop   &   Start   does   not   affect   the  
v

ehicle's   systems,   such   as   for   example,  
b

raking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time counters
A partial time counter counts the periods in S TOP   mode   during   a   journey.
It
  is   displayed   in   the   trip   computer   once   the  
S

top   &   Start   is   operating.
Press one of the " DISP" buttons to return to the
previous
 d

isplay.
A
  global   time   counter   counts   the   periods   in  
S

TOP   mode   since   the   last   reset.
When
  it   is   displayed,   press   one   of   the  
"D

ISP " buttons
  to   reset   the   counter.
4
Driving

86
C1_en_Chap04_conduite_ed01-2016
The speed limiter cannot, in any circumstances,   replace   the   need   to o

bserve   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.
Speed limiter (PureTech 82 engine)
The speed limiter is switched on  manually: t
his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
System
  which   prevents   the   vehicle   from   exceeding   the   speed   programmed   by   the   driver.Steering mounted controls
The controls are grouped together on this c
ontrol   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 S

peed   limiter   on   /   pause:   by   pulling   the  
c

ontrol   stalk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   mode   selection   indication.
6.
 S

peed   limiter   on   /   pause   indication.
7.
 S

peed   value   setting.
The
 
programmed
 
speed
 
remains
 
in
 
the
 m

emory
 
when
 
the
 
ignition
 
is
 
switched
 
off.
Driving

87
C1_en_Chap04_conduite_ed01-2016
Switching on
F Press  the   end   of   the   control   stalk:   the  s
peed   limiter   mode   is   selected   but   is   not  
s

witched   on.
F
 
S
witch   the   speed   limiter   on   by   pulling   the  
c

ontrol   stalk   towards   you,   if   the   speed  
d

isplayed   is   suitable   (by   default,   the   last  
s

peed
 pro
grammed). Once
  the   function   is   selected,   you   can   modify  
t

he   speed   setting   by:
-  
b
y   pushing   the   control   stalk   up   to   increase  
t

he
 se
tting,
-  
b
y   pushing   the   control   stalk   down   to  
d

ecrease
 t
he
 se
tting.
A   brief   push   on   the   control   stalk   modifies   the  
s

peed   setting   by   +   or   -   1   mph   (km/h).
A   maintained   push   on   the   control   stalk   modifies  t
he   speed   setting   by   +   or   -   5   mph   (km/h).
Adjusting the speed limit
setting
You do not have to switch the speed l
imiter   on   in   order   to   set   the   speed.
Pause
F You  can   temporarily   stop   the   the   speed  l
imiter   by   pulling   the   control   stalk   towards  
y

ou   again:   the   display   confirms   that   it   has  
b

een   stopped   (Pause).
F
 
P
ull   the   control   stalk   towards   you   again   to  
r

estore   the   speed   limiter.
4
Driving