Page 130 of 372
NOTICE
The wiper blades can wear out or become
damaged prematurely when wiping on a dry
window for a longer period of time. The wiper
motor can overheat. There is a risk of dam
Page 138 of 372
Forward Collision Mitigation: person
detected
Indicator light illuminates: risk of colli
Page 144 of 372
message and the meaning of the indicator/
warning lights.
Supplementary text messages Additional information, such as the cause of a
fault or the required action, can be called up
via Check Control.
With urgent text messages, the added text will
be automatically displayed on the control dis
Page 170 of 372
Occupancy detection
The occupancy detection meets the statutory
requirements of the Federal Motor Vehicle Safety Standard FMVSS 208 and deactivates
the passenger airbags under certain condi
Page 194 of 372
3."Drive Recorder"4.Accept Privacy Policy.5."Settings"6."Allow recording"7.Select the desired setting.
Recording functions
Automatic recording The recording is automatically stored when thevehicle sensors detect an accident or theft.
Page 195 of 372
Recording time1."MENU"2."All apps"3."Drive Recorder"4."Settings"5.Select the desired setting.
System limitsIn the event of serious accidents, it may not be
possible to store recordings if the damage on the vehicle is too great or the power supplywas interrupted.
In case of theft, the recording is only stored au
Page 199 of 372
situations. There may be a risk of accident or
risk of damage to property. Driving with roof
load only with activated Dynamic Stability
Control.
Display In the instrument cluster
"DSC OFF": display in the instrument cluster
with limited Dynamic Stability Control.
Indicator/warning lights Indicator light illuminates:
Page 206 of 372
Press the button.
Changing the speed Press the corresponding button untilthe set speed is set.
If active, the displayed speed is stored
and the vehicle reaches the stored speed when the road is clear.
The maximum speed that can be set depends on the vehicle.
Pressing the button to the resistance point and holding it: vehicle accelerates or decelerates
without pressure on the accelerator pedal.
After the rocker switch is released, the vehicle
maintains its final speed. Pressing the switch beyond the resistance point causes the vehicleto accelerate more rapidly.
Continuing cruise control
At the stored speed An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current speed and stored speed is not too large beforecalling up the stored speed. Otherwise, unin
