2022 BMW IX tor

Display in the instrument cluster
The indicator light in the instrument cluster illu

Electric steering wheel adjustment
General information The steering wheel adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is called up
automatically.
The current steering wheel position can be stored using the memory function.
To make it easier to enter and get out of the
vehicle, the steering wheel moves temporarily into the upper position.
Adjusting the steering wheel position
Press the switch to adjust the forward/backposition and height of the steering wheel to the
seat position.
Turning the steering wheel heating
on/off
1."CLIMATE MENU" tap in the center of the climate control bar.2. steering wheel heating.3.Select the desired setting.
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func

Storing settings1.Set the desired position.2.
Press the button. The LED lights up.
3.Press the desired button 1 or 2 while the
LED is lit. A signal sounds.
Go to Settings
Press the desired button 1 or 2.
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is pressed again.
The adjustment of the seat position on the
driver

Parking position PSelector lever position for parking the vehicle.
In selector lever position P, the drivetrain is blocked and the parking brake is engaged.
Selector lever position P is engaged automati

Engaging selector lever position P
Press the button.
When stopping the vehicle
Selector lever position D or R At inclines, the system prevents rolling backagainst the set driving direction and provides
drive

An appropriate Check Control message is
displayed.
Position N is indicated on the selector lever.4.Maneuver the vehicle from the hazardous area and secure it against rolling away.
Turning off drive

Deceleration and recuperative
braking
Deceleration
The degree of the deceleration depends on the
selector lever position, the energy recovery setting and the driving situation.
Depending on the degree of the deceleration, the brake lights will come on without steppingon the brake pedal.
The deceleration very fast in selector lever po

OverviewButton in the vehicle
Parking brake
Setting the parking brake
With a stationary vehicle Press the button.
The LED lights up.
The indicator light in the instrument cluster illuminates red.
The parking brake is engaged and
transmission lock is engaged.
While driving
Using while driving serves as an emergency
braking function.
Press and hold this button. The vehicle
brakes hard as long as the button is
pressed.
The indicator light in the instrument
cluster illuminates red, a signal sounds,
and the brake lights illuminate.
A Check Control message is displayed.
The parking brake is engaged and the trans