2021 YAMAHA YXZ1000R belt

8-6
8
A crash can damage the restraint systems in
your vehicle. A damaged restraint system
may not properly protect the person using it,
resulting in serious injury or death in a crash.
To help make sure your restraint systems are
working properly after a crash, have them in-
spected and any necessary replacements
made as soon as possible.
To wear the seat belt properly, do the follow-
ing:1. Hold the latch plate as you pull the belt
across your lap and chest. Make sure the
belt is not twisted and is not caught on
any portion of the vehi cle, your clothing,
or any equipment you are carrying.
2. If the latch plate is not positioned in the correct location along the seat belt, ad-
just its location up or down along the
length of the belt.
3. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make
sure it is secure.1. Seat belt
2. Latch plate
3. Buckle
12
12
3
UB5J7CE0.book Page 6 Thursday, November 26, 2020 1:37 PM

8-7
8
4. Put the lap portion of the belt low on yourhips. Pull up on the shoulder part so the
belt is snug across your hips. Be sure the
seat belt is not caught on the shoulder
bolster or other object.
5. Position the shoulder belt over your shoulder and across your chest. The
shoulder belt should fit against your
chest. If it is loose, pull the belt out all the
way and then let it retract. 6. Check if the seat belt shoulder position
suits the size of the driver and passenger.
To lower the belt, insert the belt into the
seat belt height adjuster slot as shown.
To raise the belt, remove the belt from the
height adjuster slot.
7. To release the buckle, firmly press the re- lease button.1. Buckle
2. Latch plate
3. Release button
1
3
2
1. Seat belt height adjuster
2. Seat belt
3. Slot
1
2
3
UB5J7CE0.book Page 7 Thursday, November 26, 2020 1:37 PM

9-13
9
6. Remove the quick fastener screws andthe bolts, and then pull the panel off as
shown. To install the panel
1. Place the panel in the original position,
and then install the bolts and the quick
fastener screws.
1. Passenger seat
2. Bolt
3. Seat belt
1
3
2
2
1. Panel B
2. Quick fastener screw
3. Bolt
1
2
2
3
2
3
3
UB5J7CE0.book Page 13 Thursday, November 26, 2020 1:37 PM

9-14
9
2. Install the passenger seat by installing thebolts, and then tighten them to the spec-
ified torque.TIPMake sure that the seat frame is properly
secured. 
Place the passenger seat belt in the original
position.
3. Install the passenger seat cushion.
4. Install the top cover by installing the bolts
and quick fastener screw.
5. Install panel A and the hood.
Panels C and D
To remove a panel1. Pull the tab on the panel lock up, and then turn the panel lock 1/4 turn clock-
wise.
1. Panel BTightening torque:Passenger seat bolt:32 N·m (3.2 kgf·m, 24 lb·ft)
1
UB5J7CE0.book Page 14 Thursday, November 26, 2020 1:37 PM

11-5
11
Rear suspension:Type:Double wishbone
Spring:
Coil spring
Shock absorber: Gas-hydraulic damper
Wheel travel: 432 mm (17.0 in)Electrical system:System voltage:12 V
Ignition system: TCI
Charging system:
AC magnetoBattery:Model:U1-H11L
Voltage, capacity:
12 V, 28.0 AhLights:Headlight:LED
Brake/tail light:
LED
Meter lighting: LED
Neutral indicator light: LED High beam indicator light:
LED
Reverse indicator light: LED
Coolant temperature warning light:
LED
Parking brake indicator light: LED
Engine trouble warning light: LED
Differential gear lock indicator light:
LED
EPS warning light: LED
Helmet reminder light: 0.8 W
Seat belt reminder light:
0.8 W
Shift timing indicator light: LED
Fuses:Main fuse:
50.0 A
Fuel injection system fuse: 15.0 A
EPS fuse: 40.0 A
Headlight fuse:
15.0 A
Signaling system fuse: 10.0 A
UB5J7CE0.book Page 5 Thursday, November 26, 2020 1:37 PM

13-2
13
HHeadlight beam, adjusting ........................................... 9-65
Headlights .................................................................... 9-65
Helmet reminder light .....................................................5-6
High beam indicator light ............................................... 5-3
Hood ............................................................................ 9-10IIdentification numbers ................................................... 1-1
Indicator lights and warning lights ................................. 5-2
Instruments, lights and switches, Pre-operation check ........................................................................... 6-8JJump-starting ............................................................... 9-61LLabel locations ............................................................... 2-1
Light switch .................................................................. 5-16
Loading ..........................................................................7-9MMain switch .................................................................... 5-1
Maintenance and lubrication chart ................................9-6
Maintenance chart, emission control system ................ 9-4
Maintenance charts ....................................................... 9-4
Model label ..................................................................... 1-1
Multi-function meter unit ................................................ 5-7NNeutral indicator light .....................................................5-2OOwner’s Manual and tool kit .......................................... 9-2PPanels .......................................................................... 9-10
Parking ........................................................................... 7-9 Parking brake indicator light .......................................... 5-3
Parking brake lever ...................................................... 5-19
Parking brake lever free play, adjusting ....................... 9-51
Parking brake pads, checking ..................................... 9-46
Passenger handhold, Pre-operation check ................... 6-7
Pedal, lubrication ......................................................... 9-53
RRear knuckle upper and lower pivot, lubrication ......... 9-55
Reverse gear lock lever ................................................ 5-20
Reverse indicator light ................................................... 5-2SSafety information .......................................................... 3-1
Seat belt reminder light .................................................. 5-6
Seat belts ..................................................................... 5-24
Seat belts, Pre-operation check .................................... 6-7
Seats ............................................................................ 5-21
Shift lever ..................................................................... 5-20
Shift lever operation and reverse driving ....................... 7-3
Shift lever, Pre-operation check .................................... 6-8
Shift light ........................................................................ 5-4
Shock absorbers, front ................................................ 5-28
Shock absorbers, rear ................................................. 5-36
Spark arrester, cleaning ............................................... 9-44
Spark plugs, checking ................................................. 9-37
Specifications .............................................................. 11-1
Stabilizer bushes, checking ......................................... 9-53
Starting the engine ......................................................... 7-2
Steering, Pre-operation check ....................................... 6-7
Steering shaft, lubrication ............................................ 9-55
Steering wheel position ................................................ 5-23
Storage ........................................................................ 10-2
Storage compartments ................................................ 5-25
UB5J7CE0.book Page 2 Thursday, November 26, 2020 1:37 PM