Page 178 of 608

1784-1. Before driving
Cargo and luggage
Side rails
To  use  the  deck  rails,  you  must
install  genuine  Toyota  accessories
or  their  equivalent  for  the  deck
rails.
Follow  the  manufacturer’s  instruc-
tions  and precautions when  install-
ing  a  genuine  Toyota  accessory  or
equivalent.
Take  notice  of  the  following  information  about  storage  precau-
tions, cargo capacity and load:● Stow cargo and luggage in the  rear deck whenever possible.
● Be sure all items are secured in place.
● Be careful to keep the vehicle level. Placing the weight as far  for-
ward as possible helps m aintain vehicle balance.
● For better fuel economy, do no t carry unnecessary weight.
Deck rails
1
WARNING
■When you secure cargo with the deck rails
Be  sure  to  follow  the  instructions  below  in  order  to  avoid the  cargo  coming
loose.
● Do  not  install  accessories  (tie-down  cleats,  storage  boxes,  etc .)  at  more
than the following number of locations per deck rail.
• Side rail:  Short deck—Max. 3 locations 
Long deck—Max. 4 locations
● Spread out tie-down/support locations evenly along the length o f the rails.
● Do not exceed a total tensile load of 440 lb. (200 kg) per deck  rail.
● To  prevent  luggage  or  cargo  from  sliding  forward  during  braking ,  make
sure the deck rail accessories such as  storage box are securely  attached
on the deck rails. 
     
        
        Page 191 of 608
1914-1. Before driving
4
Driving
Use the correct trailer ball for your application.Trailer ball load rating
Matches  or  exceeds  the  gross
trailer weight rating of the trailer.
Ball diameter
Matches the size of the trailer cou-
pler.  Most  couplers  are  stamped
with the required trailer ball size.
Shank length
Protrudes  beyond  the  bottom  of  the  lock  washer  and  nut  by  at  le ast  2
threads.
Shank diameter
Matches the ball mount hole diameter size.
Weight  carrying  ball  position:
52.0 in. (1320.8 mm)
Hitch receiver pin hole position:
45.2 in. (1148.8 mm)
Selecting trailer ball
1
2
Trailer classIVII and IIII
Typical trailer ball size2 5/16 in.2 in.1 7/8 in.
Positions for towing hitch receiver and hitch ball
3
4
1
2 
     
        
        Page 193 of 608

1934-1. Before driving
4
Driving
Your vehicle will handle differently when towing a trailer. To help avoid
an  accident,  death  or  serious  injury,  keep  the  following  in  min d when
towing:
● Speed  limits  for  towing  a  trailer  vary  by  state  or  province.  Do  not
exceed the posted to wing speed limit.
● Toyota  recommends  that  the  vehicl e-trailer  speed  limit  is  65  mph
(104 km/h) on a flat, straight, dry road. Do not exceed this li mit, the
posted  towing  speed  limit  or  the  speed  limit  for  your  trailer  a s  set
forth  in  your  trailer owner’s  manu al,  whichever is  lowest.  Instability
of the towing vehicle-trailer combination (trailer sway) increa ses as
speed increases. Exceeding speed limits may cause loss of contr ol.
● Before  starting  out,  check  the  trailer  lights,  tires  and  the  vehicle-
trailer connections. Recheck af ter driving a short distance.
● Practice turning, stopping and reversing with the trailer attac hed in
an area away from traffic until you become accustomed  to  the fe el
of the vehicle-trailer combination.
● Reversing with a trailer attached is difficult and requires pra ctice.
Grip  the  bottom  of  the  steering  wheel  and  move  your  hand  to  the
left  to  move  the  trailer  to  the  left.  Move  your  hand  to  the  rig ht  to
move the trailer to the right. (This is generally opposite to r eversing
without  a  trailer  attached.) Avoid  sharp  or  prolonged  turning.  Have
someone  guide  you  when  reversing  to  reduce  the  risk  of  an  acci-
dent.
● As stopping distance is increased when towing a trailer, vehicl e-to-
vehicle  distance  should  be  increased.  For  each  10  mph  (16  km/h)
of speed, allow at least one v ehicle and trailer length.
● Avoid sudden braking as you may  skid, resulting in the trailer  jack-
knifing and a loss of vehicle control. This is especially true  on wet or
slippery surfaces.
● Avoid jerky starts or sudden acceleration.
● Avoid jerky steering  and sharp turns, and slow down before maki ng
a turn.
● Note that when making a turn, the trailer wheels will be closer  than
the vehicle wheels to the inside  of the turn. Compensate by mak ing
a wider than normal turning radius.
Trailer towing tips 
     
        
        Page 534 of 608
5348-1. Specifications
Maintenance data (fuel, oil level, etc.)
*1: Unladen vehicle
*2: P265/60R18 tires
*3: Vehicles with a over fender
■
TWR (Trailer Weight Rating)
 P.   1 8 7
Dimensions
Cab type Access Cab
Overall length212.3 in. (5392.3 mm)
Overall width 74.4 in. (1890.5 mm)
Overall height*170.6 in. (1792.2 mm)
Wheelbase127.8 in. (3247 mm)
Front tread63.0 in. (1599 mm)
63.3 in. (1609 mm)*2
Rear tread63.2 in. (1606 mm)
63.6 in. (1616 mm)*2
Cab typeDouble Cab
With short deck With long deck
Overall length
212.3 in. (5392.3 mm) 225.5 in. (5727.3 mm)
Overall width74.4 in. (1890.5 mm)
75.2 in. (1910.3 mm)*3
Overall height*170.6 in. (1792.2 mm)
Wheelbase
127.8 in. (3247 mm) 141.0 in. (3582 mm)
Front tread63.0 in. (1599 mm)
63.3 in. (1609 mm)*2
Rear tread63.2 in. (1606 mm)
63.6 in. (1616 mm)*2