942. Instrument cluster
*1: These lights turn on when the engine switch is turned to the “ON” position(vehicles  without  a  smart  key  system)  or  IGNITION  ON  mode  (vehi cles
with  a  smart  key  system)  to  indicate  that  a  system  check  is  being  per-
formed. They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if the lights do not com e on, or if
the lights do not turn off. Have the vehicle inspected by your  Toyota dealer
for details.
*1, 3, 5PCS warning light 
( P. 478)*4
(U.S.A.)
ABS warning light 
(P. 485)
*2, 4, 5
(Yellow)
LDA indicator ( P. 478)
*4
(Canada)
ABS warning light 
(P. 485)
*4
(U.S.A.)
Brake  system  warning
light ( P. 483)
*2, 4
Slip indicator ( P. 485)
*4
(Canada)
Brake  system  warning
light (P. 483)
*4, 5Tire  pressure  warning
light (P. 485)
*4Automatic  transmission
fluid  temperature  warn-
ing light ( P. 484)*4Brake  Override  System/
Drive-Start Control warn-
ing light 
(P. 486, 487, 497)
*4High engine coolant tem-
perature warning light
(P. 484)*4Low  engine  oil  level
warning light ( P. 486)
*4Low  engine  oil  pressure
warning light ( P. 484)*4
(Canada 
only)
Low  windshield  washer
fluid warning light 
(P. 487)
*4
Charging  system  warn-
ing light ( P. 484) 
4216-3. Do-it-yourself maintenance
6
Maintenance and care
2GR-FKS engine
Full (when cold)
Add fluid (when cold)
Full (when hot)
Add fluid (when hot)
Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes,  or  slightly  longer  in  frigid  temperatures.  (Fluid
temperature, 140°F - 175°F [60°C - 80°C])
Cold: Engine  has  not  been  run  for  about  5  hours.  (Room  tem- perature, 50°F - 85°F [10°C - 30°C])
■Checking the  fluid level
Make sure to check the fluid type  and prepare the necessary items.
Clean all dirt off the reservoir.
Remove the cap by turni ng it counterclockwise.
Wipe the dipstick clean.
Reinstall the cap and remove it again.
Check the fluid level.
1
2
3
4
Fluid type Automatic transmission fluid DEXRON® II or III
Items Rag or paper, clean funnel (only for adding fluid)
WARNING
■Checking the fluid level
Take care, as the reservoir may be hot.
NOTICE
■When adding fluid
Avoid overfilling, or the power steering may be damaged.
■ After replacing the reservoir cap
Check the steering box case, vane pump and hose connections for  leaks or
damage.
1
2
3
4
5