Page 40 of 54

39
40,000 miles or 48 months
■Check installation of driver’s floor mat
■Inspect and adjust all fluid levels1
■
Inspect radiator, condenser and/or intercooler
■Inspect wiper blades
■Perform road test
■
Replace cabin air filter
■Replace engine air filter
■Replace engine oil and oil filter3
■Replace spark plugs6
■Reset tire pressure settings in central information display (CID)
■
Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_Brake lines and hoses
_Coolant level and coolant composition
_Heater/air conditioning blower motor
_
Horn, headlight flashers and hazard warning flashers
_Lighting system
_Mobility system7
_Seat belts
Dealer Service verification:
Date:Mileage: 1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on inspection results.2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and may require replacement.3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when driven less than 10,000 miles since the last oil change. reset maintenance reminder light if oil was changed.4 replace brake pads when the brake warning light appears.5 initial replacement at 36 months. replace every 24 months thereafter.6 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.7 check the sealant container expiration date during inspection. replace the sealant container with a new one before the expiration date. refer to the
Page 42 of 54

41
80,000 miles or 96 months
■Check installation of driver’s floor mat
■Inspect and adjust all fluid levels1
■
Inspect radiator, condenser and/or intercooler
■Inspect wiper blades
■Perform road test
■
Replace cabin air filter
■Replace engine air filter
■Replace engine oil and oil filter3
■Replace spark plugs5
■Reset tire pressure settings in central information display (CID)
■
Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_Brake lines and hoses
_Coolant level and coolant composition
_Heater/air conditioning blower motor
_
Horn, headlight flashers and hazard warning flashers
_Lighting system
_Mobility system6
_Seat belts
Dealer Service verification:
Date:Mileage:
_Steering linkage and boots
_tires
_
vehicle underbody and all other visible components
_ Warning triangle
_Wiper and washer system
1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on inspection results.2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and may require replacement. 3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when driven less than 10,000 miles since the last oil change. reset maintenance reminder light if oil was changed.4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before the expiration date. refer to the
Page 44 of 54

43
120,000 miles or 144 months
■Check installation of driver’s floor mat
■Inspect and adjust all fluid levels1
■
Inspect radiator, condenser and/or intercooler
■Inspect wiper blades
■Perform road test
■
Replace cabin air filter
■Replace engine air filter
■Replace engine oil and oil filter3
■Replace spark plugs5
■Reset tire pressure settings in central information display (CID)
■
Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_Brake lines and hoses
_Coolant level and coolant composition
_Heater/air conditioning blower motor
_
Horn, headlight flashers and hazard warning flashers
_Lighting system
_Mobility system6
_Seat belts
Dealer Service verification:
Date:Mileage:
1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on inspection results.2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and may require replacement. 3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when driven less than 10,000 miles since the last oil change. reset maintenance reminder light if oil was changed.4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before the expiration date. refer to the