2021 TOYOTA SIENNA HYBRID high beam

3TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
4-1. Before drivingDriving the vehicle......... 208
Cargo and luggage ....... 215
Vehicle load limits ......... 218
Trailer towing (without tow- ing package)................ 219
Trailer towing (with towing package) ..................... 220
Dinghy towing ............... 230
4-2. Driving procedures Power (ignition) switch .. 231
EV drive mode .............. 236
Hybrid transmission ...... 238
Turn signal lever ........... 242
Parking brake ................ 243
Brake Hold .................... 246
4-3. Operating the lights and wipers
Headlight switch ............ 248
AHB (Automatic High Beam) .................................... 250
Fog light switch ............. 254
Windshield wipers and washer......................... 254
Rear window wiper and washer......................... 257
4-4. Refueling Opening the fuel tank cap.................................... 259
4-5. Using the driving support
systems
Toyota Safety Sense 2.0 262
PCS (Pre-Collision System) .................................... 267LTA (Lane Tracing Assist)
.................................... 275
RSA (Road Sign Assist) 285
Dynamic radar cruise control with full-speed range ... 288
BSM (Blind Spot Monitor) .................................... 299
Intuitive parking assist ... 308
RCD (Rear Camera Detec- tion) function ................ 315
PKSB (Parking Support Brake) .......................... 319
Parking Support Brake func- tion (static objects) ...... 323
Parking Support Brake func- tion (rear-crossing vehicles).................................... 329
Driving mode s elect switch
.................................... 333
Driving assist systems ... 335
4-6. Driving tips Hybrid vehicle driving tips.................................... 341
Winter driving tips .......... 343
5-1. Using the ai r conditioning
system and defogger
Front automatic air condition- ing system ................... 348
Re ar automatic air condition-
i

ng system ................... 358
Heated steering wheel/seat heaters/seat ventilators 361
5-2. Using the interior lights Interior lights list ............ 363
4Driving
5Interior features

23Pictorial index
■Switches
Driving position memory switches*1................................P.179
Window lock switch ............................................. ..............P.203
Power window switches ....... .............................................P.201
Door lock switches ............................................................P.135
Outside rear view mirror swi tches ...................................P.198
Inside lock buttons ............................................ ................P.135
VSC OFF switch .................................................................P.336
Automatic High Beam switch ..................................... ......P.250
AC 120V switch
*1............................................................... .P.374
Heated steering wheel switch
*1........................................P.361
Camera switch
*1,2
Instrument panel light control switches ....................P.99 , 103
“ODO TRIP” switch .............................................. ........P.99, 103
Fuel filler door opener swi tch ...........................................P.260
Power sliding door main switch ................................. ......P.148
*1: If equipped
*2: Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MAN-
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O

952-1. Instrument cluster
2
Vehicle status information and indicators
The indicators inform the driver
of the operating state of the
vehicle’s various systems.
Indicators
Turn signal indicator
( P.242)
(U.S.A.)
Headlight indicator
( P.248)
(Canada)
Tail light indicator
( P.248)
Headlight high beam
indicator ( P.250)
Automatic High Beam
indicator ( P.250)
Fog light indicator (if
equipped) ( P.254)
Smart key system
indicator
*1 (  P.231)
Cruise control indica-
tor ( P.288)
Dynamic radar cruise
control indicator
(  P.288)
Cruise control “SET”
indicator ( P.288)
LTA indicator
*2
(  P.280)
Intuitive parking assist
OFF indicator
*3, 4 (if
equipped) ( P.310)
RCD OFF indicator
*3
(if equipped)
(  P.315)
PKSB OFF indicator*3,
5
(if equipped)
(  P.320)
(Flashes)
Slip indicator*5
(  P.336)
VSC OFF indicator
*3,
5
(  P.336)
PCS warning light
*3, 5
(  P.269)
BSM outside rear view
mirror indicators
*5, 6 ( i f
equipped) ( P.300)
BSM OFF indicator (if
equipped) ( P.300)
RCTA OFF indica-
tor
*3, 5 (if equipped)
(  P.300)
Brake hold standby
indicator
*5 (  P.246)
Brake hold operated
indicator
*5 (  P.246)
Security indicator
*7
(  P.88, 89)
“READY” indicator
(  P.231)
Low outside tempera-
ture indicator
*8
(  P.98, 102)
EV indicator ( P.80)
(U.S.A.)
Parking brake indica-
tor ( P.243)
(Canada)
Parking brake indica-
tor (P.243)

207
4
4
Driving
Driving
4-1. Before drivingDriving the vehicle....... 208
Cargo and luggage ..... 215
Vehicle load limits ....... 218
Trailer towing (without tow- ing package).............. 219
Trailer towing (with towing package) ................... 220
Dinghy towing ............. 230
4-2. Driving procedures Power (ignition) switch 231
EV drive mode ............ 236
Hybrid transmission .... 238
Turn signal lever ......... 242
Parking brake .............. 243
Brake Hold .................. 246
4-3. Operating the lights and wipers
Headlight switch .......... 248
AHB (Automatic High Beam)........................ 250
Fog light switch ........... 254
Windshield wipers and washer....................... 254
Rear window wiper and washer....................... 257
4-4. Refueling Opening the fuel tank cap.................................. 2594-5. Using the dr
iving support
systems
Toyota Safety Sense 2.0 .................................. 262
PCS (Pre-Collision System) .................................. 267
LTA (Lane Tracing Assist) .................................. 275
RSA (Road Sign Assist) .................................. 285
Dynamic radar cruise con- trol with full-speed range
.................................. 288
BSM (Blind Spot Monitor) .................................. 299
Intuitive parking assist . 308
RCD (Rear Camera Detec- tion) function .............. 315
PKSB (Parking Support Brake) ........................ 319
Parking Support Brake func- tion (static objects) .... 323
Parking Support Brake func- tion (rear-crossing vehi-
cles) ........................... 329
Driving mode select switch .................................. 333
Driving assist systems. 335
4-6. Driving tips Hybrid vehicle driving tips.................................. 341
Winter driving tips........ 343

2504-3. Operating the lights and wipers
1With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
2Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with
the headlights on or off.1 Press the Automatic High
Beam switch.
NOTICE
■To prevent 12-volt battery dis-
charge
Do not leave the lights on longer
than necessary when the hybrid
system is not running.
Turning on the high beam
headlights
AHB (Automatic High
Beam)
The Automatic High Beam
uses an in-vehicle front
camera to assess the bright-
ness of streetlights, the
lights of vehicles ahead etc.,
and automatically turns the
high beam on or off as nec-
essary.
WARNING
■Limitations of the Automatic
High Beam
Do not overly rely on the Auto-
matic High Beam. Always drive
safely, taking care to observe
your surroundings and turning the
high beam on or off manually if
necessary.
■To prevent incorrect opera-
tion of the Automatic High
Beam system
Do not overload the vehicle.
Activating the Automatic
High Beam system

2514-3. Operating the lights and wipers
4
Driving
2Turn the headlight switch to
the or position.
The Automatic High Beam indicator
will come on when the system is
operating.
■High beam automatic turning
on or off conditions
●When all of the following condi-
tions are fulfille d, the high beam
will be automatica lly turned on
(after approximately 1 second):
• Vehicle speed is above approxi-
mately 21 mph (34 km/h) or more.
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with headlights or tail lights turned on.
• There are few streetlights on the
road ahead.
●If any of the following conditions
are fulfilled, the h igh beam will be
automatically turned off:
• Vehicle speed drops below
approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Vehicles ahead have headlights or tail lights turned on.
• There are many streetlights on the
road ahead.
■Front camera detection infor-
mation
●The high beam may not be auto-
matically turned off in the following
situations:
• When oncoming vehicles sud-
denly appear from a curve
• When the vehicle is cut in front of by another vehicle
• When vehicles ahead are hidden from sight due to repeated curves,
road dividers or roadside trees
• When vehicles ahead appear from the faraway lane on a wide road
• When vehicles ahead have no lights
●The high beam ma y be turned off
if a vehicle ahead that is using fog
lights without using the headlights
is detected.
●House lights, street lights, traffic
signals, and illuminated billboards
or signs may cause the high beam
to switch to the low beams, or the
low beams to remain on.
●The following fact ors may affect
the amount of time taken to turn
the high beam on or off:
• The brightness of headlights, fog
lights, and tail lig hts of vehicles
ahead
• The movement and direction of
vehicles ahead
• When a vehicle ahead only has
operational lights on one side
• When a vehicle ahead is a two- wheeled vehicle
• The condition of the road (gradi-
ent, curve, condition of the road
surface etc.)
• The number of passengers and
amount of luggage
●The high beam ma y be turned on
or off when the d river does not
expect it.
●Bicycles or similar objects may not
be detected.
●In the situations shown below, the
system may not be able to accu-
rately detect surrounding bright-
ness levels. This may cause the
low beams to remain on or the
high beams to cause problems for
pedestrians, vehicles ahead or
other parties. In these cases,
manually switch between the high
and low beams.
• In bad weather (rain, snow, fog, sandstorms, etc.)
• The windshield is obscured by

2524-3. Operating the lights and wipers
fog, mist, ice, dirt, etc.
• The windshield is cracked or dam- aged
• The front camera is deformed or
dirty
• When the temperature of the front
camera is extremely high
• Surrounding brightness levels are equal to those of h eadlights, tail
lights or fog lights
• When headlights or tail lights of vehicles ahead are turned off,
dirty, changing color, or not aimed
properly
• When the vehicle is hit by water,
snow, dust, etc. fr om a preceding
vehicle
• When driving thr ough an area of
intermittently changing brightness
and darkness
• When frequently and repeatedly
driving ascending/descending
roads, or roads with rough, bumpy
or uneven surfaces (such as
stone-paved roads, gravel roads,
etc.)
• When frequently and repeatedly
taking curves or driving on a wind-
ing road
• There is a highly reflective object
ahead of the vehicle, such as a
sign or mirror
• The back of a vehicle ahead is
highly reflective, such as a con-
tainer on a truck
• The vehicle’s headlights are dam-
aged or dirty, or are not aimed
properly
• The vehicle is listing or titling due
to a flat tire, a trailer being towed,
etc.
• The high beam and low beam are
repeatedly being switched
between in an abnormal manner
• The driver believes that the high
beam may be causing problems
or distress to other drivers or
pedestrians nearby
■Temporarily lowering sensor
sensitivity
The sensitivity of the sensor can be
temporarily lowered. 1
Turn the power s witch off while
the following conditions are met.
●The headlight switch is in or
position.
●The headlight switch lever is in the
original position.
●Automatic High Beam switch is
on.
2 Turn the power switch to ON.
3 Within 60 seconds after step 2,
repeat pushing the headlight
switch lever to the high beam
position then pulling it to the orig-
inal position quickly 10 times,
then leave the lever in the origi-
nal position.
4 If the sensitivity is changed, the
Automatic High Beam indicator
turns on and off 3 times.
■Switching to the high
beams
Push the lever away from you.
The Automatic High Beam indicator
will turn off and the headlight high
beam indicator will turn on.
Pull the lever to its original position
to activate the Automatic High
Beam system again.
■Switching to the low beams
Press the Automatic High Beam
Turning the high beam
on/off manually

2534-3. Operating the lights and wipers
4
Driving
switch.
The Automatic High Beam indicator
will turn off.
Press the switch to activate the
Automatic High Beam system
again.
■Temporarily switching to
the low beams
Pull the lever toward you and
then return it to its original posi-
tion.
The high beams are on while the
lever is pulled toward you, how-
ever, after the lever is returned to
its original position, the low beams
remain on for a certain amount of
time. Afterwards, the Automatic
High Beam will be a ctivated again.
■Temporarily switching to the
low beams
It is recommended to switch to the
low beams when the high beam
may cause problems or distress to other drivers or
pedestrians nearby.