51
1  Inspect sealed transmissions, transfer cases and differentials for signs of leakage. If any leakage from a sealed 
component is suspected, it is recommended that you have the sealed component inspected by a Toyota dealer. Inspect 
power steering fluid (if equipped) and brake fluid level/condition. Inspect engine and inverter (if equipped) coolant   
level/condition/freezing point. Your dealer may recommend services (Dealer-Recommended Maintenance) based on 
inspection results.
2   
Reset the oil replacement reminder light (“MAINT REQD”) or the message “OIL MAINTENANCE REQUIRED” on the   
multi-information display after maintenance at every 5,000 miles.
3  Perform these service items only if you drive primarily under the conditions indicated.4  
Initial engine coolant replacement at 100,000 miles/120 months. Replace every 50,000 miles/60 months thereafter.  
Initial inverter coolant replacement at 150,000 miles/180 months. Replace every 50,000 miles/60 months thereafter. Refer 
to “Engine/Inverter Coolant” in the “Explanation of Maintenance Items” section in the back of this guide for more information.
5      
 
Refer to “Engine/Inverter Coolant” in the “Explanation of Maintenance Items” section in the back of this guide for   
more inf ormation.
6   Visually check the HV battery cooling intake fi lter for dirt or dust every 5,000 miles and clean if necessary. Clean every 
20,000 miles.
7  Not all vehicles are designed for towing. Refer to your Vehicle Owner’s Manual  for details.
105,000 miles or 126 months
	
■Add Toyota EFI Tank Additive or equivalent (Hawaii,   
  Puerto Rico, Saipan and American Samoa only) 
	
■Check installation of driver
57
EXPLANATION OF MAINTENANCE ITEMS
Rear Differential Oil
Inspect or replace at specified intervals.  
When performing inspections, check each  
component for signs of leakage. If you 
discover any leakage, have it repaired by a 
qualified technician immediately. 
Spark Plugs
Replace at specified intervals. Install new 
plugs of the same type as originally   
equipped. A qualified technician should 
perform this operation.
Steering Gear
Inspect for signs of leakage. If you  
discover any leakage, have it repaired 
immediately by a qualified technician. 
Steering Linkage and Boots
With the vehicle stopped, check for   
excessive freeplay in the steering wheel. 
Inspect the linkage for bending and   
damage and the dust boots for   
deterioration, cracks and damage. Replace 
any damaged parts. A qualified technician 
should perform these operations.
Tire Rotation
Tires should be rotated according to the 
instructions in the Owner’s Manual.  When 
rotating tires, check for damage and   
uneven wear. Replace if necessary.
Wiper Blades
The wiper blades should not show any   
signs of cracking, splitting, wear, 
contamination or deformation. The wiper 
blades should clear the windshield without 
streaking or skipping.
Maintenance Log 
MAINTENANCE