2021 TOYOTA MIRAI tow

17
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Turn
Push
Steering lock release
When the steering lock cannot be released, “Push Power Button while T\
urning
Steering Wheel in Either Direction” will be displayed on the Multi-In\
formation
Display. Press the power button shortly and firmly while turning the ste\
ering wheel
left and right.
MANUAL (IF EQUIPPED)
POWER (IF EQUIPPED)
Hold the wheel, push the lever down, set angle and length and return the\
lever.
Lock release lever Angle
Toggle the control switch to set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Automatic tilt away & returning function (if equipped):
When the vehicle is
turned off, the steering wheel moves up and away from driver and stows, \
but
returns to its position when the vehicle is “ACC” or “ON” mo\
de.
Power easy access system (if equipped): The steering wheel and driver’s seat
move in accordance with power switch mode and the driver’s seat belt \
condition.
UpControl switch
Away from
the driver
Length
Toward
the driver
Down Angle
Length
Tilt & telescopic steering wheel

58
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Using an intelligent camera, Road Sign Assist (RSA) is designed to det\
ect speed
limit signs, stop signs, do not enter signs and yield signs, and display\
them on the
Multi-Information Display (MID).*
* All vehicle actions must be driver-initiated and are not automated. See www.toyota.com/safety-sense for model applicability.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system operation may be limited.
RSA DISPLAY
When the driving support system
information display is selected,
a maximum of 3 signs can be
displayed.
TEMPORARILY SWITCHING TO THE LOW BEAMS
Pull the lever toward you and then return it to its original position to\
switch to the
low beams temporarily.
The high beams are on while the lever is pulled toward you, however, aft\
er the lever
is returned to its original position, the low beams remain on for a cert\
ain amount of
time. Afterwards, the Automatic High Beams will be activated again.
NOTE: It is recommended to switch to the low beams when the high beams
may cause problems or distress to other drivers or pedestrians nearby.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
When a tab other than the driving
support system information is selected,
the following types of road signs will be
displayed. • Speed limit sign
• Do Not Enter sign (when notification is necessary)

62
SAFETY & EMERGENCY FEATURES
Emergency tire puncture repair kit
Your vehicle is not equipped with a spare tire, but instead is equipped \
with an
emergency tire puncture repair kit (bottle of sealant and compressor).\

After temporarily repairing the tire with the repair kit, have the tire \
repaired or
replaced by your Toyota dealer.
Refer to the Owner’s Manual for tire changing procedures.
TOOL LOCATION
Sticker
Air release cap
Hose
Air pressure
gauge
Power plug Compressor switch
TIRE REPAIR KIT COMPONENTS
Towing eyeletEmergency tire puncture repair kit
BottleCompressor