2021 TOYOTA AYGO set clock

3355-6. “SETUP” menu
5
Audio system
AYGO_OM_Europe_OM9A012E
Select “Delete phonebook” using the “MENU” knob.
Select the desired phonebook using the knob and press
(Yes).
Select “Call volume” using the “MENU” knob.
Change the call volume.
To decrease the volume: Turn the knob counterclockwise.
To increase the volume: Turn the knob clockwise.
To set the volume, press (Back).
Select “Ringtone volume” using the “MENU” knob.
Change the ring tone volume.
To decrease the volume: Turn the knob counterclockwise.
To increase the volume: Turn the knob clockwise.
To set the volume, press (Back).
Select “Ringtone” using the “MENU” knob.
Using the knob, select a ring tone (1-3). To set the selected ring
tone, press (Back).
Select “Transfer histories” using the “MENU” knob and press
(Yes).
■ Phone number
Up to 1000 names can be stored.
■ Call history
Up to 10 numbers can be stored in each of the outgoing, incoming and
missed call history memories.
■ Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.
Deleting a phone book’s data
Setting call volume
Setting ring tone volume
Setting ring tone
Transferring call histories

341
5
5-8. Bluetooth® Phone
Audio system
AYGO_OM_Europe_OM9A012E
Speaking on the phone
A call can be transferred between the cellular phone and system while
dialing, receiving a call, or during a call. Use one of the following
methods:
a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the operation
of the phone.
b. Press the (Phone).*
*
: This operation can be performed only when transferring a call from the
cellular phone to the system during a call.
Press (Mute).
Press (0-9) and use the “MENU” knob to input the desired dig-
its.
• To send the input digits press (Send).
• When finished, press (Exit) to return to the previous screen.
To decrease the volume: Turn counterclockwise.
To increase the volume: Turn clockwise.
: If equipped
Transferring a call
Muting your voice
Inputting digits
Setting call volume

3536-1. Using the air conditioning system and defogger
6
Interior features
AYGO_OM_Europe_OM9A012E■
Adjusting the temperature setting
Ty pe A:
To adjust the temperature set-
ting, turn the temperature con-
trol dial clockwise (warm).
Ty pe B :
To adjust the temperature set-
ting, turn the temperature con-
trol dial clockwise (warm) or
counterclockwise (cool).
If is not pressed, the system will blow ambient temperature air or
heated air.
■
Adjusting the fan speed setting
To adjust the fan speed, turn
the fan speed control dial clock-
wise (increase) or counterclock-
wise (decrease).
Turning the dial to “0” turns off
the fan.
■
Change the airflow mode
To select the airflow, set the air
outlet selector dial to the
desired position.
Air flows to the upper body
Air flows to the upper body
and feet
Air flows to the feet
Air flows to the feet and the
windshield defogger operate
Air flows to the windshield
defogger operate
The positions between the air
outlet selections can also be
selected for more delicate
adjustment.
1
2
3
4
5

3746-4. Other interior features
AYGO_OM_Europe_OM9A012E
Vehicles with a multimedia system
Refer to the “Multimedia owner’s manual”.
Vehicles without a multimedia system
“MENU” knob
“Back” button
Display can be returned to the
previous screen, by pressing the
“Back” button.
■
Adjusting the clock
Press the “MENU” knob when the vehicle is stopped.
Select “Clock” on the menu
screen.
Turn the “MENU” knob to adjust the hours.
After adjusting the hours, press the “MENU” knob to input the hours.
Turn the “MENU” knob to adjust the minutes.
After adjusting the minutes, press the “MENU” knob to input the min-
utes.
■The clock is displayed when
Vehicles without a smart entry & start system
The engine switch is in the “ACC” or “ON” position.
Vehicles with a smart entry & start system
The engine switch is in ACCESSORY or IGNITION ON mode.
■When disconnecting and reconnecting battery terminals
The clock data will be reset.
Clock (if equipped)
1
2

4307-3. Do-it-yourself maintenance
AYGO_OM_Europe_OM9A012E
Remove the fender liner clip
and open the fender liner.
Unplug the connector while
pressing the lock release.
Turn the bulb base counter-
clockwise.
Set the new light bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn it clockwise to set.

4347-3. Do-it-yourself maintenance
AYGO_OM_Europe_OM9A012E
Set the new light bulb and
turn the bulb base clockwise.
Reinstall the license plate
lights as shown in the illustra-
tion.
Align the notches and claws on
the license plate lights with the
mounting when installing.
■High mounted stoplight
Push the upper springs using
the flathead screwdriver and
remove the high mounted
stoplight assembly.
To prevent damage, cover the
tip of the flathead screwdriver
with tape.
Spring
Springs