2021 MERCEDES-BENZ S-CLASS SALOON LONG brake

&
W
WARNI NG
ARNI NGRisk of accident due tolimited
saf ety-re lated functions during theto wing
process
Saf ety-re lated functions are limited or no lon-
ge rav ailable in thefo llowing situations:
R theve hicle is switched o..
R the brake system or po wer steering system
is malfunctioning.
R the energy supply or the on-board electri-
cal system is malfunctioning.
When your vehicle is towe daw ay, signi/cantly
more e.ort may be requ ired tosteer and
brake than is normally requ ired. #
Use a tow bar. #
Make sure that the steering wheel can
mo vefreely be fore towing theve hicle
awa y. *
N
NO
OTE
TE Damage due toexcessive tractive
po wer If
yo u pull away sharpl y,the tractive po wer
may be too high and theve hicles could be
damaged. #
Pull away slo wlyand smoo thly. Loading t
Loading t
he v
he vehicle f
ehicle f or tr
or transport
anspo rt Re
quirements:
R The vehicle is stationar y.
R The vehicle is switched o..
R The driver's displ ayis in the initial state with
no menus open (/ page 345).Transpo rtis
also possible with a warning message visible.
R The 12 V bat tery isch arge d.
Plug-in h
Plug-in h ybr
ybrid:
id:transpor tation of vehicles should
only be car ried out byprofessional reco very com-
panies. #
If necessar y,set the system language
(/ page 386). #
Obser vethe no tes on towing away
( / page 451). #
Connect theto wing device totheto wing eye
in order toload theve hicle.
% V
Vehicles wit
ehicles wit h tr
h trailer hitc
ailer hitc h:
h:you can also attach
th eto w bar tothe trailer hitch. #
Switch on the po wer supply (/ page 210). #
ShiT the transmission toposition i.
% The transmission may be loc ked in position
j intheev ent of damage tothe electrics. To
shiT toi , pr ovide the on-board electrical
system with po wer (/ page 448).
* N
NOOTE
TE Possible damage totheve hicle
when loading or unloading When loading or unloading,
theve hicle must
be raised totransport le vel.
If th e transport settings are not shown or the
Vehicle not ready for loading messageis dis-
pla yed, theve hicle may not be loaded or
unloaded. Breakdown assis
tance
453
453

%
Ifth eve hicle is raised totransport le vel,the
transport settings will continue tobe shown
ev en aTer a restart. Operation of the driver's
display is meanwhile restric ted.
When theve hicle is at transport le vel, it is lo wered
again in thefo llowing situations:
R When driven faster than 40 km/h.
R The 12 V battery is dischar ged. The
vehicle is adjusted tothe height of the last
active le vel.
T
T r
ranspor
anspor ting t
ting the v
he vehicle
ehicle #
Load theve hicle onto the transpor ter. #
ShiT the transmission toposition j. #
Use the electric parking brake tosecure the
ve hicle against rolling away. #
Switch o. theve hicle and the po wer suppl y. #
Only secure theve hicle bythe wheels.
4MA
4MA TIC v
TIC v ehicles
ehicles #
Make sure that the front and rear axles come
to rest on the same transpor tation vehicle. *
N
NOOTE
TE Damage tothe drive train due to
incor rect positioning of theve hicle #
Do not position theve hicle abo vethe
connection point of the transport vehi-
cle. U
Unloading t
nloading t he v
he vehicle
ehicle #
Make sure that theve hicle is raised totrans-
port le vel before unloading (/ page 453).
Low
Low er
ering t
ing t he v
he vehicle
ehicle aTer
aTerunloading
unloading #
Switch on the po wer suppl y. #
Start theve hicle. #
Swipe upward in the transport settings to
select Standard level and pressa.
The vehicle is adjusted tothe height of the last
active le vel and theLowering vehicle message
is displa yed. #
ATer theve hicle has been lo wered, press the
G button for at least two seconds.
The transport settings are closed. Breakdown assistance
455
455

R
Tyre pressures will be displayed after a few
minutes of driving: cur rent values are not yet
known tothe system. The pressure/tempera-
ture values of each tyre are displa yed as soon
as they are known tothe system.
R Tyre pressure monitor active: thete ach-in
process of the system is not yetcomple te. The
tyre pressures are already being monitored. #
Compare the cur rent tyre pressure with the
re commended tyre pressure forth e cur rent
ope rating condition (/ page 463).Addition-
all y,obser vethe no tes on cold tyres
(/ page 462).
% The values displa yed in the driver's display
may deviate from those of the tyre pressure
ga uge as they referto sea le vel.At high ele va-
tions, the tyre pressure values indicated by a
tyre pressure gauge are higher than those
shown in the driver's displa y.
Bear in mind thefo llowing related topic:
R Notes on tyre pressure (/ page 462)R R
est
est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on each
of thefo ur wheels (/ page 462).
Re start the tyre pressure monitoring system in the
fo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted.
Driver's displa y:
4 © 5
Service #
Select Tyre pressure and con/rm with a. #
Swipe down wards on Touch Control on the
stee ring wheel.
The Use current tyre pressures as new refer-
ence values? messageis shown in the driver's
displa y. #
Select Yesand co n/rmthere start wi tha .
The Tyre pressure monitor restarted message
is shown in the driver's displa y. Cur
rent wa rning message s are deleted and
th eye llow h warning lamp goes out.
ATer you ha vebeen driving for a few minutes,
th e system checks whe ther the cur rent tyre
pressures are within the speci/ed range. The
cur rent tyre pressures are then accep ted as
re fere nce values and monitored.
If th e tyre pressure le vels are not within the
speci/ed range, thePlease correct tyre pres-
sure message appears.
Bear in mind thefo llowing related topic:
R Notes on tyre pressure (/ page 462) Wheel c
Wheel c
hange
hange N
No
ot
tes on selecting,
es on selecting, /tting
/ttingand r
and replacing tyr
eplacing tyr es
es &
W
WARNING
ARNING Risk of accident due toincor-
re ct wheel and tyre dimensions
If wheels and tyres of the wrong size are /t ted,
th e service brakes or components in the brake
system and in the wheel suspension may be
damaged. Wheels and tyres
465
465

R
Furthermore, the use of cer tain tyre types in
cer tain regions and areas of operation can be
high lybene/cial.
R Only use tyres and wheels of the same type
(summer tyres, winter tyres, MOExtended
tyres) and the same make.
R Only /t wheels of the same size on one axle
(leT and right).
It is only permissible to/t a di.e rent wheel
size in theev ent of a 0at tyre in order todrive
to the specialist workshop.
R Do not make any modi/cations tothe brake
system, the wheels or the tyres.
The use of shims or brake dust shields is not
permitted and may in validate theve hicle's
ge neral opera ting permit.
R V Vehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: all /t tedwheels must be equipped with
functioning sensors forth e tyre pressure mon-
itoring system.
R Attemp eratures below 7 °C use winter tyres
or all-season tyres mar kedi M+Sfor all
wheels. Wi
nter tyres pr ovide the best possible grip in
wintry road conditions.
R For M+S tyres, only use tyres with the same
tread.
R Obser vethe maximum permissible speed for
th e M+S tyres /t ted.
If th e tyre's maximum speed is below that of
th eve hicle, this must be indicated byan
appropriate label in the driver's /eld of vision.
R Run in new tyres at moderate speeds forthe
/r st 100 km.
R Replace the tyres aTer six years at the latest,
re ga rdless of wear.
R When r
When r eplacing wit
eplacing wit h tyr
h tyres t
es that do no
hat do no t f
t featur
eatur e
e
r
r un-0at
un-0at c
char
har act
acter
eris
istics:
tics: vehicles with
MOExtended tyres are not equipped with a
TIREFIT kit at thefa ctor y.Equip theve hicle
with a TIREFIT kit aTer replacing with tyres
th at do not feature run-0at characteristics,
e.g. winter tyres.
Fo r more information on wheels and tyres, con-
ta ct a quali/ed specialist workshop. Be sure
toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 462)
R Tyre pressure table (/ page 463)
R Notes on the emer gency spa rewheel
(/ page 475) N No
ot
tes on int
es on int erc
erchanging wheels
hanging wheels &
W
WARNING
ARNING Risk of injury thro ugh di.erent
wheel sizes
Inter changing the front and rear wheels can
se verely impair the driving characteristics.
The disk brakes or wheel suspension compo-
nents may also be damaged. #
Only inter change the front and rear
wheels if the wheels and tyres ha vethe
same dimensions. Inter
changing the front and rear wheels if the
wheels or tyres ha vedi.erent dimensions can
re nder thege neral opera ting permit in valid. 468 468
Wheels and tyres

Pr
Pr
epar
epar ing t
ing the v
he vehicle f
ehicle f or a wheel c
or a wheel c hange
hange R
R
eq
eq uir
uir ements:
ements:
R The vehicle is not on a slope.
R The vehicle is on solid, non-slippery and le vel
gr ound.
R The requ ired tyre-change tool kit is available.
% Ifyo ur vehicle is not equipped with the tyre-
ch ange tool kit, consult a quali/ed specialist
wo rkshop to/nd out about sui table tools. #
Apply the electric parking brake manuall y.#
Movethe front wheels tothe straight-ahead
position. #
ShiT the transmission toposition j. #
V
Vehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:setthe nor-
mal vehicle le vel (/ page 305). #
Switch o. theve hicle. #
Make sure that theve hicle cann otbe star ted. #
Place choc ks orother suitable items under the
front and rear of the wheel that is diagonal ly
opposite the wheel you wish tochange. #
Remo vethe hub cap if necessary
(/ page 470). #
Raise theve hicle (/ page 471). R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R
R
eq
eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 470). Aluminium hub cap
Aluminium hub cap #
T
To r
o r emov
emov e:
e:position soc ket2 from the tyre-
ch ange tool kit on hub cap 1. #
Position wheel spanner 3on soc ket2. #
Using wheel spanner 3, turn hub cap1
anti-clockwise and remo veit. #
T
To
o /t:
/t: follow the inst ructions abo veinreve rse
order.
% Speci/ed
Speci/ed tight
tightening t
ening t orq
orque:ue: 25 Nm. 470
470
Wheels and tyres

R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R
R
eq
eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 470).
R The hub caps ha vebeen remo ved
( / page 470).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel
is being changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands and/or feet under the
ve hicle.
R Never lie under theve hicle. R
Do not start the engine and do not release the
electric parking brake.
R Do not open or close any doors or the boot
lid. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe bolts
comple tely. Wheels and tyres
471 471

#
Continue toturn ratchet ring spanner 3until
th e tyre is raised a maximum of 3 cm o. the
gr ound. #
Loosen and remo vethe wheel (/ page 473). R
R
emo
emo ving a wheel
ving a wheel R
R
eq
eq uir
uir ements:
ements:
R The vehicle is raised.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the le vel of
comfort when braking.
* NO
NOTE
TEDamage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe uppermost wheel bolt com-
ple tely. #
Screw cent ring pin 1into theth re ad ins tead
of the wheel bolt. #
Unscr ewthere maining wheel bolts com-
ple tely. #
Remo vethe wheel. F F
itting a ne
itting a ne w wheel
w wheel R
R
eq
eq uir
uir ements:
ements:
R The wheel tobe changed is remo ved and the
cent ring pin is scre wed in (/ page 473). &
W
WARNING
ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts tocome loose, as too can dam-
aged wheel bolts or wheel hub thre ads. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. #
Obser vethe information on thech oice of tyres
(/ page 465).
Fo r tyres with a speci/ed direction of rotation, an
ar ro w on the side wall of the tyre indicates the
cor rect direction of rotation. Obser vethe direc-
tion of rotation when /tting. #
Slide the wheel tobe mounted onto the cen-
tring pin and push it on. Wheels and tyres
473
473

#
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R fuels
R DeNOx agent AdBlue ®
forex haust gas aTer-
treatment
R lubricants
R coolant
R brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res.
The operating 0uids appr ovedby Mercedes-Benz
can be identi/ed bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB-A pproval 229.51) Fu
rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop &
W WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. &
W
WARNING
ARNING Risk of injury from fuels
Fu els are poisonous and hazardous toyour
health. #
Do not swallow fuel or let it come into
contact with skin, eyes or clo thing. #
Do not inhale fuel vapour. #
Keep children away from fuel. #
Keep doors and windo wsclosed during
th ere fuelling process.
If yo u or other people come into contact with
fuel, obser vethefo llowing: #
Immediate lyrinse fuel o. your skin with
soap and water. #
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical at tention
immedia tely. #
Ifyo u swallow fuel, seek medical atten-
tion immediatel y.Do not induce vomit-
ing. #
Change immediately out of clo thing that
has come into contact with fuel. Flexible-fuel
vehicles can be refuelled wi th thefo l-
lowing fuel types:
R unleaded petrol
R E85 fuel 482 482
Te
ch nical data