2021 MERCEDES-BENZ GLS SUV lights

Oper
Oper
ating t
ating t he combination switc
he combination switc h f
h for t
or t he lights
he lights 1
High beam
2 Turn signal light, right
3 Headlamp 0ashing
4 Turn signal light, leT #
Use the combination switch toactivate the
desired function. Switc
Switc
hing on high beam
hing on high beam #
Turn the light switch totheL orÃ
position. #
Push the combination switch in the direction
of ar row 1.
When the high beam is activated, the indicator
lamp for low beam Lwill be deactivated
and replaced bythe indicator lamp for high
beam K.
Switc
Switc hing
hingo.
o.high beam
high beam #
Push the combination switch in the direction
of ar row 1 or pull it in the direction of ar row
3 .
Headlam
Headlam p
p0ashing
0ashing #
Pull the combination switch in the direction of
ar ro w 3.
T
T ur
ur n signal light
n signal light #
T
T o indicat
o indicat e
ebr
br ie0y:
ie0y: push the combination
switch brie0y tothe point of resis tance in the
direction of ar row 2 or4.
The cor responding turn signal light will 0ash
th re e times. #
T To indicat o indicat e per
e permanentl y:
manent ly:push the combina-
tion switch be yond the point of resistance in
th e direction of ar row 2 or4. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the hazar
he hazar d w
d war
arning lights
ning lights #
Press button 1. 162
162
Light and sight

The hazard
warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is heavily braked from a speed of
more than 70 km/h toa standstill.
When you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1.
When the turn signal indicator is activated, the
hazard warning lights will be inter rupted. Int
Int
ellig
ellig ent Light Syst
ent Light Syst em
em Int
Int
ellig
ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamps adapt tothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 163)
R Cornering light (/ page 163)
R Motorw ay mode (/ page 164) R
Enhanced fog light function (/ page 164)
R O.-road light (/ page 164)
The system is active only when it is dar k.
A
A ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the low beam is
switched on.
Depending on theve hicle's equipment, the course
of the lane in which you are driving will also be ev
aluated and the active headlamps function will
adjust the light in advance.
Cor
Cor ner nering light function
ing light function The cornering light impr
ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight bends,
fo rex ample. It can be activated only when the low
beam is switched on.
The function is active under thefo llowing condi-
tions:
R Atspeeds below 40 km/h when the turn sig-
nal light is switched on or the steering wheel
is turned Light and sight
163 163

Switc
Switc
hing t
hing t he Int
he Int ellig
elligent Light Syst
ent Light Syst em
em on/o.
on/o.
R
R eq
equir uir ements:
ements:
R The ignition is switched on.
Multimedia sy stem:
4 © 5
Settings 5
Lights
5 Intelligent Light System #
Switch the function on or o.. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
W ARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier On
very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
Pa rtial high beam uses the high beam toshine
past other road users rather than dazzling them. Light and sight
165 165

The
vehicle in front will be illuminated bythe low
beam.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam will switch o. automati-
cally.
R The high beam will switch o. automaticall y.
At speeds greater than appr oximately 50 km/h:
R The headlamp range of the low beam is regu-
lated automatically based on the distance to
ot her road users.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel. Switc
Switc hing A hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hing o.
o. #
Switch o. the high beam using the combina-
tion switch. Se
Se
tting t
tting t he lo
he low beam (v
w beam (v ehicles wit
ehicles wit h MUL
h MULTIBEAM
TIBEAM
LED headlam
LED headlam ps onl
ps only)
y) Multimedia system:
4 © 5
Settings 5
Lights
5 Dipped-beams #
Select Right-side traffic, Left-side trafficor
Automatic. Se
Se
tting t
tting t he e
he ext
xter
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R R
eq eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle engine is switched o., the
ex terior lighting will be activated forth e set
time. Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated.
Illuminat Illuminat ed r
ed running boar
unning boar ds:
ds:when the sur round
lighting is switched on, the illumination of theru n- 166
166
Light and sight

ning boa
rds is activated when a door is opened. If
th e door is not closed, theru nning boa rdcour tesy
lighting is automatically deacti vated aTer 40 sec-
onds. #
Activate or deactivate the function. Int
Int
er
erior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting F
F
r
ront ov
ont overerhead contr
head contr ol panel
ol panel 1
p Front leT reading lamp
2 | Automatic interior lighting control
3 c Front interior lighting 4
u Rear interior lighting
5 p Front right reading lamp #
T
To switc
o switc h
hon/o.:
on/o.: press but ton1 –5
accordingl y.
Contr
Contr ol panel in t
ol panel in t hegr
he grab handle
ab handle 1
p Rear reading lamp #
T
To switc
o switc h
hon/o.:
on/o.: press but ton1. A
A
djus
djusting t ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Settings 5
Lights
5 Ambient lighting
Se
Se tting t
tting t he colour
he colour #
Select Colour. #
Set the desired colour.
A A djus djus ting t
ting t he br
he br ightness
ightness #
Select Brightness.
Ad just the brightness.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones.
The EMPHASIS, AMBIENTandROOF zones
can be set separatel y.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination. Light and sight
167
167

A
A
ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation#
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals.
A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Automatic wiping, normal
3 Å Automatic wiping, frequent 168
168
Light and sight

#
Always make sure that nobody is within
th era nge of thega rage door's mo ve-
ment. Before prog
ramming thega rage door opener, park
th eve hicle outside thega rage . Make sure that the
ve hicle is switched on but not star ted.
R
R eq
eq uir
uir ements:
ements:
R The vehicle has been par ked outside the
gar age or outside thera nge of mo vement of
th e door.
R The vehicle is switched on.
R The vehicle has not been star ted.
% The garage door opener function is alw ays
av ailable when theve hicle is switched on. #
Press and hold but ton1, 2or3 that you
wish toprog ram.
Indicator lamp 40ashes yello w.
% It can take up to20 seconds before the indi-
cator lamp 0ashes yello w. #
Release the pr eviously pressed button.
Indicator lamp 4continues to0ash yello w. #
Point remo tecont rol5 from a distance of
1 cm to8 cm towa rds button 1,2or3. #
Press and hold button 6ofremo tecont rol
5 until one of thefo llowing signals appears:
R Indicator lamp 4lights up green continu-
ousl y.Prog ramming is comple te.
R Indicator lamp 40ashes green. Prog ram-
ming was successful. Additionall y,syn-
ch ronisation of thero lling code with the
door system must be car ried out. #
If indicator lamp 4does not light up or 0ash
gr een: repeat the procedure. #
Release all of the buttons.
% The remo tecont rolfo rth e door drive is not
included in the scope of delivery of thega rage
door opener.
Sync
Sync hr
hronising t
onising t he r
he rolling code
olling code
R
R eq
eq uir
uir ements:
ements:
R The door system uses a rolling code.
R The vehicle must be within range of thega rage
door or door drive. 224
224
Driving and parking

R
The vehicle as well as persons and objects are
located outside thera nge of mo vement of the
door. #
Press the prog ramming button on the door
drive unit.
Initiate the next step within appr oximately
30 seconds. #
Press pr eviously prog rammed button 1,2
or 3 repeatedly until the door closes.
When the door closes, prog ramming is com-
ple ted.
% Please also read the operating inst ructions for
th e door drive.
T
T r
r oubleshoo oubleshoo ting when pr
ting when progr ogramming t
amming t he r
he remo te
emo te
contr
contr ol
ol #
Check if the transmitter frequency of remo te
cont rol5 is suppor ted. #
Replace the batteries in remo tecont rol5. #
Hold remo tecont rol5 atvarious angles from
a distance of 1 cm to8 cm front of the inside
re arview mir ror.Yo u should test every position
fo r at least 25 seconds before trying ano ther
position. #
Hold remo tecont rol5 atthe same angles at
va rious distances in front of the inside rear
view mir ror.Yo u should test every position for
at least 25 seconds before trying ano ther
position. #
Onremo tecont rolsth at transmit only for a
limited period, press button 6onremo te
cont rol5 again before transmission ends. #
Angle the aerial line of thega rage door opener
unit towa rdsth ere mo tecont rol.
% It is possible that older garage doors cannot
be operated using there mo tecont rol in the
inside rearview mir roreve n aTer you ha ve
successfully per form ed the measures descri-
bed abo ve. If this is the case, contact the
HomeLink ®
Hotline.
% Support and additional information on pro-
gramming:
R Onthe HomeLink ®
Hotline on (0) 08000
466 354 65 or +49 (0) 6838 907-277
R Onthe Internet at https://
www.homelink.com Opening or closing t
Opening or closing t he g he gar
arag
ag e door
e door
R
R eq
eq uir
uir ements:
ements:
R The cor responding button is prog rammed to
operate the door. #
Press and hold buttons 1,2or3 until the
door opens or closes. #
If indicator lamp 40ashes yellow aTer
appr oximately 20 seconds: press and hold the
pr ev iously pressed button again until the door
opens or closes.
Clear
Clear ing t
ing the g
he gar
arag
ag e door opener memory
e door opener memory #
Press and hold buttons 1and 3.
Indicator lamp 4lights up yello w. #
If indicator lamp 40ashes green: release
buttons 1and 3.
The entire memory has been dele ted. Driving and parking
225
225