2021 MERCEDES-BENZ GLE SUV tow

Do not inter
change the head restra ints of the
front and rear seats. Otherwise, you will not be
able toadjust the height and angle of the head
re stra ints cor rectl y.
Ad just the head restra int fore -and-aft position so
th at it is as close as possible tothe back of your
head. &
WARNING Risk of injury or death dueto
incor rect seat position
The seat belt will not of ferth e intended le vel
of pr otection if you ha venot mo vedth e seat
backrest toan almost vertical position.
In particular, you may slip under the seatbelt
and injure yourself. #
Adjust the seat proper lybefore begin‐
ning your journe y. #
Alw ays ensure that the seat backrest is
in an almost vertical position and that
th e shoulder section of your seat belt is
ro uted across the cent reofyour shoul‐
der. &
WARNING Risk of injury duetoexc es‐
sive stra in on the grab handle
If yo u apply your full body weight tothe grab
handle or pull it abruptl y,the grab handle
may be damaged or become loose from its
anchorage. #
Use the grab handles only tostabilise
th e seating position or toassist in get‐
ting in and out of the seat. &
WARNING Risk of injury or death dueto
objects under the co-driver seat
Objects trapped under the co-driver seat can
inter fere with the function of the automatic
co-driver airbag shutoff or damage the sys‐
te m. #
Do not store any objects under the co-
driver seat. #
When the co-driver seat is occupied,
make sure that no objects are trapped
under the co-driver seat. 1
Head restra int height
2 Seat backrest inclination
3 Seat height
4 Seat cushion length
5 Seat cushion inclination
6 Seat fore -and-aft position #
Save the settings with the memory function
(/ page 119). Seats and
stowing 103

Ad
justing the front passen ger seat electri‐
cally from the driver's seat &
WARNING Risk of injury or death dueto
th e front seat being positioned too close
to the cockpit
The front airbags can also injure the occu‐
pants in the front of theve hicle. #
Alw ays adjust the front seats so they
are as faraw ay as possible from the
front airbags. #
In addition, obse rveth e no tes on cor‐
re ct seat adjustment. Re
quirements:
R The po wer supply is switched on. Yo
u can call up thefo llowing functions forthe
front passenger seat:
R Seat adjustment
R Seat heating
R Seat ventilation
R Memory function #
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. #
Adjust the front passenger seat using the
buttons on the driver's side door operating
unit. #
Toselect the driver's seat: press button1
again.
When the indicator lamp goes out, the driv‐
er's seat has been selected. 104
Seats and stowing

Ad
justing the 4-w aylumbar support 1
Higher
2 Softer
3 Lower
4 Firmer #
Use buttons 1to4 toadjust the conto ur
of the backrest. Ad
justing the rear seats electrical ly *
NO
TEDama getothere ar seat armrest
when folding the cent reseat backrest
fo rw ard If
th ere ar seat armrest is folded down, it can
be damaged when the cent reseat backrest
is folded forw ard. #
Foldthere ar seat armrest upwards
before folding the cent reseat backrest
fo rw ard. The middle seat backrest is adjus
tedto ge ther
with the left seat. 1
Head restra int height
2 Seat backrest inclination
3 Seat fore -and-aft position Seats and
stowing 105

Fo
lding there ar seats forw ards electrical ly&
WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
WARNING Risk of accident if the seat
and seat backrest are not engaged
The seat and seat backrest can fold for‐
wa rds.
There is a risk of thefo llowing, in particular:
R The vehicle occupant may be pressed
against the seat belt. The seat belt can‐
not pr otect as intended and could cause
additional injur y.
R Ach ild restra int sy stem is no longer prop‐
er ly suppor ted or positioned and can no
longer fulfil its function as intended. R
The seat backrest cann otrestra in objects
or goods in the load compartment.
Alw ays ensure that the seat and seat back‐
re st are engaged, in particular:
R Before persons tra vel in theve hicle while
sitting on a seat with the easy entry and
ex itfeature
R Afteryo u ha veadjus tedth e seat
R Afterth e easy entry andexitfeature has
been used
R Afterth e load compartment enlar gement
has been folded forw ards &
WARNING Risk of injury duetoseat
backrest folded forw ards
If th ere ar seat backrest is folded forw ards,
persons in theth ird row of seats could col‐
lide with parts of the seat adjustment mech‐
anism, in particular in theev ent of an acci‐
dent, sudden braking or an abrupt change of
direction. #
Ifth ere is a person in theth ird row of
seats, there ar seat in front of that per‐
son must be folded back into the driv‐
ing position before starting the journe y. #
People in theth ird row of seats must
not place their legs on a rear seat back‐
re st that has been folded forw ards. Alw
ays ensure that all vehicle occupants ha ve
th eir seat belts fastened cor rectly and are sitting
prope rly. Pa rticular attention must be paid to
ch ildren.
If yo u no lon gerre qu ire the seat backrest tobe
fo lded down for loading or forge tting in and out,
fo ld it back into place. &
WARNING Risk of becoming trapped if
th e seat is not engaged
The seat does not engage when folded for‐
wa rds. The seat can fold backwards unex‐
pectedl y,e.g. when accelerating, braking or
in theev ent of an abrupt change of direction
or an accident. 106
Seats and stowing

Pe
ople in the seat's sweep can become trap‐
ped. #
If a seat is folded forw ards, alw aysfo ld
it back before driving off. #
Make sure that the seat is engaged. If a seat on
the second rowof seats is not
engaged, this will be shown on the multifunction
display on the instrument clus ter.
Re quirements:
R The area into which the seat is folded is
clear.
R The seat has been folded up (/ page125).
R Vehicles with comfort seating: the cent re
armrest is folded up.
R Vehicles with an extended centre console:
th estow age compartment in the cent recon‐
sole is closed.
R Vehicles with a centre seat backrest:the
centre seat ba ckrest is in an upright position
(/ page 123). To
make it easier toget in and out, you can fold
th e seats on the second rowof seats forw ards in
ve hicles with a third row of seats. Here, the
centre seat folds forw ards and backwards
to get her with the left-hand seat in vehicles with
a centre seat backrest. #
Tofold the seat into the front position:
brief lypull on button 1.
The head restra int will mo vedown wards. The
seat backrest will mo veinto the front posi‐
tion. The seat fore -and-aft adjustment will
mo veforw ards until the seat is unloc ked. The
seat will then tip forw ards. #
Tofold the seat back: press and hold but‐
to n1 until there ar seat engages audibl y.
The seat will tilt down wards and stop in the
front position. The seat backrest will remain
in the cargo position. #
Tointer rupt thefo lding procedure before
engagement, let go of button 1.Tocontinue
th efo lding procedure, press and hold button
1 again. #
Set the seat backrest inclination and seat
fo re -and-aft adjustment using the buttons on
th e door.
% Toinc rease the size of the luggage compart‐
ment, you can mo vethe seat backrests into
th e luggage compartment floor position
(/ page 123). Seats and
stowing 107

Fo
lding there ar seats forw ards mechanically
(eme rgency release)
The release loops are located on the outer sides
and rear sides of the seats on the second row of
seats. Side
release loops Re
lease loops on there ar sides #
Pull one of there lease loops 1. #
Foldthe seat backrest forw ards. #
Before commencing your journe y,make sure
th at the seat backrest and there ar ben ch
seat are engaged. Head
restra ints Ad
justing the front seat head restra ints man‐
ually &
WARNING Risk of accident due to
adjusting vehicle settings while theve hi‐
cle is in motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations in particular:
R Ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion.
R Ifyo ufast enyour seat belt while theve hi‐
cle is in motion. #
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel and the mir ror and fas‐
te nyo ur seat belt. 108
Seats and stowing

&
WARNING Risk of injury duetohead
re stra ints not being fitted or being adjus‐
te d incor rectly
If head restra ints ha venot been ins talled or
ha ve not been adjus ted cor rectly, there is an
increased risk of injury in the head and neck
area, e.g. in theev ent of an accident or when
braking. #
Alw ays drive with the head restra ints
fi tted. #
Before driving off, ma kesure forev ery
ve hicle occupant that the cent reofthe
head restra int supports the back of the
head at about eye le vel. Do not inter
change the head restra ints of the
front and rear seats. Otherwise, you will not be
able toadjust the height and angle of the head
re stra ints cor rectl y.
Ad just the head restra int fore -and-aft position so
th at it is as close as possible tothe back of your
head. #
Toraise: pullthe head restra int up. #
Tolowe r:press release knob 1inthe direc‐
tion of the ar row and push the head restra int
down. #
Tomo veforw ard: press release knob 2
and pull the head restra int forw ard. #
Tomo vebackwards: pressrelease knob 2
and push the head restra int backwards. Ad
justing the front seat luxury head
re stra ints mechanically #
Tomo veforw ard: press release knob 1
and pull the head restra int forw ard. #
Tomo vebackwards: pressrelease knob 1
and push the head restra int backwards.
Ad justing the head restra ints of there ar
seats mechanically
Depending on theve hicle equipment, you can
adjust the head restra ints in there ar. Seats and
stowing 109

#
Toraise: pullthe head restra int up. #
Tolowe r:press release knob 1inthe direc‐
tion of the ar row and push the head restra int
down.
Ve hicles with a third row of seats
The head restra ints on theth ird row of seats
ha ve a usage position and a non-usage position.
The usage position is theex tended, top position
in which the head restra int engages; the non- usage position is
the bottom, retracted position
of the head restra int. If the seats on theth ird
row of seats are being used, the head restra int
must be in theto p, engaged usage position. #
Ifth eth ird row of seats is occupied: move
th e head restra ints totheve ry top and ha ve
th em engage there. #
Ifth eth ird row of seats is not occupied:
mo vethe head restra ints totheve ry bottom.
Fi tting/ removing the rear seat head
re stra ints
Re moving
Depending on theve hicle equipment, you can
re mo vethe head restra ints in there ar. #
Release there ar seat backrest and fold it for‐
wa rds slightly (/ page123). #
Pull the head restra int upwards as far as it
will go. #
Push release knob 1inthe direction of the
ar row and pull out the head restra int. 11 0
Seats and stowing