2021 MERCEDES-BENZ EQA SUV light

%
Ifth e battery has been disconnected or com-
ple tely dischar ged, you will ha vetoreset the
outside mir rors. Only then will the automatic
mir rorfo lding function workproper ly. #
T
To r
o r eset:
eset: brie0y press button 2.
An outside mir rorth at has been pushed out of
position can be engaged in position again as fol-
lo ws: #
V
Vehicles wit
ehicles wit hout electr
hout electr icall
ically f
y folding outside
olding outside
mirr
mirr or
ors:
s: manually mo vethe outside mir ror into
th e cor rect position. #
V
Vehicles wit
ehicles wit h electr
h electricall
ically f
y folding outside mir-
olding outside mir-
r
r ors
ors: press and hold button 2.
Yo u will hear a clic k.The outside mir ror will
now be set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. The electrolyte is hazardous
tohealth and cau-
ses ir rita tion. It must not come into contact
with your skin, eyes, respiratory or gans or
clo thing or be swallo wed. #
Ifyo u come into contact with electrolyte,
obser vethefo llowing:
R Immediate lyrinse the electrolyte
from your skin with water and seek
medical attention.
R If electrolyte comes into contact with
your eyes, immediately rinse them
th oroughly with clean water and seek
medical attention.
R Ifth e electrolyte is swallo wed, imme-
diately rinse your mouth out thor-
oughl y.Do not induce vomiting. Seek
medical attention immediatel y.
R Immediately change out of clo thing
which has been contaminated with
electrolyte.
R If an allergic reaction occurs, seek
medical attention immediatel y. The inside
rearview mir ror and the outside mir ror
on the driver's side will automatically go into anti-
dazzle mode if light from a headlamp hits the sen-
sor on the inside rearview mir ror.
Syst Syst em limits
em limits
The system will not go into anti-dazzle mode if: R The drive system is switched o..
R Reversege ar is engaged.
R The interior lighting is switched on. F
F
r
ront-passeng
ont-passeng er outside mirr
er outside mirr or par
or parking position
king position
function
function The parking position makes parking easier.
The front-passenger outside mir
ror will swivel
down wards in the direction of there ar wheel on
th e front passenger's side when:
R the parking position is stored (/ page 141).
R the front-passenger mir ror is selected.
R reve rsege ar is engaged. 140 140
Light and sight

The front-passenger outside mir
ror will mo veback
to its original position when:
R you shiT the transmission toano ther transmis-
sion position.
R you are tr avelling at a speed greater than
15 km/h.
R you press the button forth e outside mir ror on
th e driver's side. S
S
t
tor
or ing t
ing t he par
he par king position of t
king position of t he fr
he front-
ont-
passeng
passeng er outside mirr
er outside mirr or usingrev
or using rever
erse g
se g ear
ear S S
t tor
or ing
ing #
Press button 1toselect the front-passenger
outside mir ror. #
Engage reve rsege ar. #
Movethe front-passenger outside mir ror into
th e desired parking position using button 2.Calling up
Calling up #
Press button 1toselect the front-passenger
outside mir ror. #
Engage reve rsege ar.
The front-passenger outside mir ror will mo ve
into the stored parking position. A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the aut
he automatic mirr
omatic mirr or f
or fold-
old-
ing function
ing function Multimedia system:
4 © 5
Settings 5
Vehicle #
Switch Automatic fold-in on or o.. Light and sight
141
141

The colours of
the indicator lamp on button &
ha ve thefo llowing meanings:
R Blue:
Blue: cooling is activated.
R R
Red:
ed: heating is activated.
R Y
Yello w:
ello w:the departure time has been preselec-
te d. #
Set the desired temp erature using the w
button. #
Press button &.
The red or blue indicator lamp on button
& will light up or go out.
% You can also activate the function via the
Mercedes me App. Air v
Air v
ents
ents A
A
djus
djusting t ting t he fr
he front air v
ont air v ents
ents &
W
WARNI NG
ARNI NGRisk of burns or frostbite due to
being too close tothe air vents
Ve ry hot or very cold air can 0ow from the air
ve nts. #
Make sure that all vehicle occupants
alw ays maintain a su1cient dis tance
from the air vents. #
If necessar y,direct the air0ow toano ther
area of theve hicle interior. To
guarantee the 0ow of fresh air thro ugh the air
ve nts into theve hicle interior, comply with thefo l-
lowing:
R Alwayske ep theve nts and ventilation grilles in
th eve hicle interior clear.
R Keep the air inlet free of residue build-up
(/ page 303). #
T
To open or close:
o open or close: hold airvent 1 inthe
cent reand turn it tothe leT (open) or right
(closed) as far as it will go. #
T
To se
o se t t
t the
he air0ow
air0ow dir
dir ection:
ection: hold air vent 1 in
th e centre and mo veit up or down or tothe
leT or right.
A
A djus
djusting t ting t he r
he rear air v
ear air v ents
ents #
T
To open or close:
o open or close: hold airvent 1 inthe
cent reand turn it tothe leT or right as far as it
will go. #
T
To se
o se t t
t the
he air0ow
air0ow dir
dir ection:
ection: hold air vent 1 in
th e centre and mo veit up or down or tothe
leT or right. Climate control
147
147

In
theeve nt of an accident or impact tothe
ve hicle underbod y,components of the high-
vo ltage electrical system may be damaged
although the damage is not visible. #
Never make any modi/cations tothe
high- voltage on-board electrical system. #
Do not switch on or use theve hicle if its
high- voltage on-board electrical system
components ha vebeen modi/ed or dam-
aged. #
Neverto uch damaged components of
th e high-voltage on-board electrical sys-
te m. #
ATer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system. #
ATer an accident, ha vetheve hicle trans-
por tedawa y. #
Have the components of the high-voltage
on-board electrical system checked at a
qu ali/ed specialist workshop and
re placed if necessar y. R
R
eq
eq uir
uir ements:
ements:
Only disconnect the high-voltage on-board electri-
cal system manually in thefo llowing situations:
R The 6 restraint system warning lamp lights
up in the Instrument Displa y,e.g. aTer an
accident.
R The vehicle is badly damaged, e.g. aTer an
accident, and there straint system co mpo-
nents ha venot been triggered.
Oper
Oper ating t
ating t he high-v
he high-v olt
oltag
age disconnect de
e disconnect de vice
vice
Only disconnect the high-voltage on-board electri-
cal system manually in the abo ve-mentioned sit-
uations. #
Switch o. theve hicle. #
ShiT the transmission toposition j. #
Apply the electric parking brake. #
Secure theve hicle against rolling away. #
Open the bonnet. #
Press release tab1 inthe direction of the
ar ro w and pull it out. #
Pull high- voltage disconnect device 2inthe
direction of the ar row until it engages.
The high- voltage on-board electrical system is
switched o..
All workon the drive system (including aTer dis-
connecting the high-voltage on-board electrical Driving and parking
149
149

Yo
u can in0uence energy consum ption bydoing
th efo llowing:
R driving with particular care (/ page 156)
R driving in drive prog ram ; (/page 158) The lettering in
the segment will light up brightl y,
th e outer edge will light up and the segment will
/ll up when thefo llowing driving style is adop ted:
R 1 Steady speed
R 2 Gentle deceleration and rolling
R 3 Moderate acceleration The lettering in
the segment will be grey ,th e outer
edge will be dark and the segment will em pty
when thefo llowing driving style is adop ted:
R 1 Fluctuations in speed
R 2 Heavy braking
R 3 Sporty acceleration
The ECO display will show you when you ha ve
driven economicall y:
R The thre e segments will /ll up comple tely at
th e same time
R The edges around all thre e segments will light
up
The additional range achie ved as a result of your
driving style in comparison with a driver with a
ve ry sporty driving st yle will be shown in the
cent reof display 4. Therange displa yed does
not indicate a /xed reduction in consum ption. R
R ecuper ecuper ativ
ative br
e br ak
ake syst
e syst em
em F
F unction of t
unction of t he r
he recuper
ecuper ativ
ative br
e br ak
ake syst
e syst em
em
Depending on the selected recuperation le vel,the
electric mo tors are operated as an alternator when in
overrun mode and during braking in order
to charge the high-voltage battery while driving.
As soon as youre lease the accelerator pedal
when theve hicle is in motion, recuperation in
ove rrun mode is initiated.
The higher there cuperation, the more sharply the
ve hicle is braked when coasting and the more
electrical energy is fed into the high-voltage bat-
te ry.
The rege nerative brake system has thefo llowing
ch aracteristics:
R supports braking with elect ronically cont rolled
brake force boosting
R con verts th e kinetic energy of theve hicle into
elect ric energy
% Ifyo u brake hard, the mechanical brake is
also used. This means that the maximum
re cuperative energy cann otbe reco vered. The
more you drive and brake in an anticipatory
manner, the more e1cient lyenergy can be
re cuperated. Driving and parking
155
155

adjust
the driving style forth ero ute ahead, use
minimal energy and recuperate.
ECO Assist is displa yed on theAssistance
menu(/ page 246). If the system de tects an
ev ent ahead, e.g. a vehicle ahead, and the driving
style can be optimised, theeve nt will appear on
th e inst rument displa y.
Depending on theve hicle's equipment, thefo llo w-
ing events can also be de tected and displa yedfor
th ero ute section ahead:
R Speed limit
R Downhill gradient
R Junctions and roundabouts
R Bends V
V
ehicles wit
ehicles wit h Dr
h Driving Assist
iving Assist ance P
ance Pack
ackag
age:
e: In order
fo r ECO Assist toreact toa speed limit, the auto-
matic adoption of speed limits must be activated
(/ page 216). These route events will be de tec-
te d only if route-based speed adap tation is acti ve
( / page 205). 1
Event ahead
2 Distance display forth eev ent ahead
3 "Foot o. the accelerator" recommendation
The segments of dis tance display 2show the
distance totheev ent ahead as follo ws:
R Afew segments light up: theev ent ahead is
near.
R Many segments light up: theev ent ahead is
fur ther awa y.
If ECO Assist is acti ve, "Foot o. the accelerator"
symbol 3will appear on theAssistance menu
on the inst rument displa y,on the head-up display
and next tothe transmission position displa y. Driving and parking
157
157

When
theve hicle nears an event, ECO Assist will
calculate the optimal speed for minimal energy
consum ption based on the distance and speed.
"Foot o. the accelerator" recommendation 3will
appear on the inst rument displa y.
If yo uta ke your foot o. the accelerator pedal in
good time, there maining segments on the display
will successively turn green until theeve nt sh own
is reached. The driv etra in will be set for minimal
energy consum ption. The vehicle will recuperate
autonomously and thus charge the high-voltage
batter y.
% You can also manually increase or reduce
re cuperation. Ho wever, ECO Assist is availa-
ble only in thehà setting (/ page 156).
If th ere is no response to"Foot o. the accelera-
to r" recommendation 3,the segments will
re main white.
The event will be shown for a short time aTer it
has been passed.
If th eev ent in volves a vehicle in front, all seg-
ments will immediately turn green once there is a
re sponse to"Foot o. the accelerator" prom pt3 . If ECO Assist cann
otidentify a recommendation
fo r adjusting the driving style forth eev ent ahead,
no thing will be displa yed. The system will be pas-
sive.
Syst
Syst em limits em limits
ECO Assist can function even more precisely if
th ero ute is adhered towhen route guidance is
active. The basic function is also available without
active route guidance. Not all information and
tra1c situations can be fore seen. The quality
depends on theav ailable map data.
ECO Assist is only an aid. The driver is responsible
fo rke eping a safe distance from theve hicle in
front, forve hicle speed and for braking in good
time. You must be ready tobrake at all times ir re-
specti veof whe ther the system is active.
The system may be impaired or may not function
in thefo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsu1cient
illumination of thero ad, highly variable shade
conditions, rain, sno w,fog or heavy spr ay.
R Ifth ere is glare, e.g. from oncoming tra1c,
direct sunlight or re0ections. R
Ifth e windscreen is dirty in the vicinity of the
multifunction camera.
R Ifth e multifunction camera is misted up, dam-
aged or obscured.
R Ifro ad signs are hard todetect, e.g. due to
dirt, snow or insu1cient lighting, or because
th ey are obscured.
R Ifth e digital road map of the navigation sys-
te m has incor rect or outdated information.
R If signs are ambiguous, e.g. road signs in road-
wo rks or in adjacent lanes.
R Ifth era dar sensors are dirty or obscured.
R When you drive on roads with steep uphill or
downhill gradients.
R Ifth ere are nar row vehicles in front, such as
bicycles or mo torc yc les. D D
YN
YNAMIC SELECT switch AMIC SELECT switch F
F
unction of t
unction of t he D
he DYN
YNAMIC SELECT switchAMIC SELECT switch Use
theDY NAMIC SELECT switch tochange
between thefo llowing drive prog rams:
(/ page 160). 158
158
Driving and parking

R
Ach arging cable that has been appr ovedfor
th eve hicle.
The charging process can vary depending on the
po we r supply equipment.
Shor terch arging times can be achie ved in thefo l-
lowing ways:
R Charging at a wallbox.
R Charging at a charging station.
When doing so, alw ays obser vethe local informa-
tion.
Do not lea vethech arging cable cont rols hanging
loose from a mains soc ket.
Do not liT the controls bythefo llowing compo-
nent parts:
R The charging cable connector.
R The mains plug.
When charging, pr otect thech arging cable cont rol
element from excessive heat such as direct sun-
light. Otherwise, thech arging process may be
cancelled. N No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at a
y at a
w
w allbo
allbo x or c
x or c har
harging st
ging st ation (mode 3)
ation (mode 3) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toawa llbox
using incor rectly ins talled component parts
could cause a /re or an electric shoc k,for
ex ample. #
Only connect thech arging cable to a
wa llbox that:
R Has been proper lyinstalled and
R Has been inspected byaqu ali/ed elect ri-
cian #
For saf etyre asons, only use charging
cables that ha vebeen tested and
appro vedby the manufacturer forch arg-
ing the high-voltage battery in an electric
ve hicle. #
Never use damaged charging cables. #
Do not extend thech arging cable. #
Do not use adap ters. #
Obser vethe saf ety no tes in the operat-
ing inst ructions forth ewa llbox. If
ch arging at a wallbox without pre-ins talled
cable, use the optionally available charging cable
fo rwa llbox and charging station (mode 3). The
ch arging cable is st owed in a bag in the boot/
luggage compartment.
Only use charging cables that ha vebeen tested
and appro vedby the manufacturer forch arging
th e high-voltage battery in an electric vehicle. &
D DAN
AN GER
GER Risk of fatal injuries due todam-
aged components
Connecting thech arging cable toach arging
station using a damaged component part
could cause a /re or an elect ric shoc k,for
ex ample. #
Forch arging stations with a preinstalled
ch arging cable:
R Perform a visual check of thech arg-
ing station for obvious faults, such as
massive damage tothe housing or
ch arging cable. Driving and parking
167 167