Yo
u can stop the adjustment process bypressing
one of the memory function position switches. &
W
WARNING
ARNING Risk of becoming trapped if
ch ildren activate the easy entry and exit
fe ature‑
Child ren could become trapped if they acti-
va te the easy entry‑ and exitfeature, particu-
lar lywhen unat tended. #
Never lea vechildren unattended in the
ve hicle. #
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. When
the easy entry and exitfeature is active, the
driver's seat will mo vebackwards and the bac k-
re st will be mo vedto a steeper position when:
R You switch the ignition o. when the driver's
door is open
R You open the driver's door when the ignition is
switched o. %
The driver's seat will then mo vebackwards
only if it is not already at there ar of the seat
adjustment range.
The seat backrest will then mo ve forwards
only if it is not already at the front of the bac k-
re st adjustment range.
The driver's seat will mo veback tothe last drive
position when:
R You switch the ignition on with the driver's
door closed.
R You close the driver's door when the ignition is
switched on
The last drive position will be sa ved when:
R You switch the ignition o..
R You call up the seat settings via the memory
function.
R You sa vethe seat settings via the memory
function. Se
Se
tting t
tting t he easy entr
he easy entr y and e
y and exit f
xit feature
eature Multimedia system:
4 © 5
Settings 5
Vehicle
5 Automatic seat adjustment
5 Easy Entry/Exit #
Activate or deactivate the function. Memor
Memor
y function
y function F
F
unction of t
unction of t he memor
he memory function
y function &
W
WARNING
ARNING Risk of an accident if the mem-
ory function is used while driving
If yo u use the memory function on the driver's
side while driving, you could lose control of
th eve hicle as a result of the adjustments
being made. #
Only use the memory function on the
driver's side when theve hicle is station-
ar y. 112
112
Seats and st
owing
with a
charging prediction. The charging predic-
tion either refers to the predicted charge leve l at
th e set departure time, or the time at which the
high- voltage battery will be fully charge d.
% When the ignition is switched on, a lightning
symbol appears next tothech arge leve l dis-
play during thech arging process.
% Depending on thete mp erature, thefa n and
bat tery cooling system may audibly switch on
during thech arging process.
% Ifth eve hicle is idle for lengt hyperiods and
connected tothe mains suppl y,the high-volt-
age battery will be rech arge d automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control). Ending t Ending t
he dir
he direct curr
ect curr ent c
ent char
harging pr
ging pr ocess (mode
ocess (mode
4)
4) R
R
eq
eq uir
uir ements:
ements:
R The distance between theke y and theve hicle
does not exceed 1 m. Combo 1 v
Combo 1 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 3.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Press and hold button 2onthech arging
cable connector and remo vethech arging
cable connector from theve hicle soc ket. %
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop. #
Close the soc ket co ver and the soc ket 0ap.
Combo 2 v
Combo 2 v ehicle socket
ehicle soc ket Driving and parking
179
179
th
eve hicle, press and hold thec button,
switch on theve hicle and engage reve rsege ar
again.
Switc
Switc hingrev
hing rever
ersing camer
sing camer a aut
a automatic mode
omatic mode
on/o.
on/o.
The reve rsing camera is only an aid. It is not a
substitute foryo ur attention tothe sur roundings.
The responsibility for safe manoeuvring and par k-
ing remains with you. Make sure that no persons,
animals or objects etc. are in the manoeuvring
ra nge. Pay attention toyour sur roundings and be
re ady tobrake at all times.
Multimedia system: 4 © 5
Settings 5
Assistance
5 Camera & parking #
Switch Auto reversing camera on or o..
Opening t Opening t he camer
he camera cov
a cover of t
er of t herev
he rever
ersing cam-
sing cam-
era
era
Multimedia system:
4 © 5
Settings 5
Assistance
5 Camera & parking #
Select Open camera cover. %
The camera co ver closes automatically aTer
some time or aTer an ignition cycle. P P
ar
ar king Assis
king Assist P t PARK
ARK TR
TRONIC
ONIC F
F
unction of P
unction of P ar
arking Assis
king Assist P t PARK
ARK TR
TRONIC
ONIC
Pa rking Assist PARKTRONIC is an electronic par k-
ing assistance system with ultrasound. It monitors
th e area around your vehicle using multiple sen-
sors on the front bumper and on there ar bumper.
Pa rking Assist PARKTRONIC show syo uth e dis-
ta nce between your vehicle and a de tected obs ta-
cle visual lyand audib ly.
Pa rking Assist PARKTRONIC is only an aid. It is
not a substitute foryo ur attention tothe sur round-
ings. The responsibility for safe manoeuvring and
parking remains with you. Make sure that there
are no persons, animals or objects in the manoeu-
vring area while manoeuvring and parking in/exit-
ing parking spaces.
In the standard setting, an intermittent warning
to ne sounds from a distance of app roximately
0.3 m toan obs tacle in front and appr oximately
1.0 m toan obs tacle behind. A continuous warn-
ing tone sounds from a distance of app roximately 0.2 m. Using
theWarn early all-round setting in
th e multimedia system, thewa rning tones for
front and side impact pro tection can be set to
sound at a greater distance of appr oximately
1.0 m in front and 0.6 m on the sides
(/ page 232).
% The Warn early all-round setting is always
active in there ar of theve hicle.
P
P ar ar king Assis
king Assis t P
t PARK
ARK TR
TRONIC displa
ONIC displa y in t
y in t he multi-
he multi-
media syst
media syst em
em Ve
hicles without 360° Camera 228
228
Driving and parking
5
ß Press brie0 y:calls up favo urites
Press and hold: adds a favo urite or theme #
Alternativel y,tap© ontheto uchscreen. #
Call up the application (/ page 251).F
F
unctions of LIN
unctions of LIN GUA
GUATR
TRONIC
ONIC &
W
WARNING
ARNING Risk of distraction from infor-
mation systems and communications
equipment
If yo u operate information systems and com-
munication devices integ rated in theve hicle
when driving, you could be distracted from the
tra1c situation. This could also cause youto
lose control of theve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and tra1c conditions and operate the
equipment with theve hicle stationar y. Fo
ryo ur ow n sa fety, alw ays obser vethefo llowing
points when operating mobile communications
equipment and especially your voice control sys-
te m:
R Obser vethe legal requ irements forth e coun-
try in which you are driving.
R Ifyo u use thevo ice control system in an emer-
ge ncy your voice can change and your tele-
phone call, e.g. an emer gency call, can
th ereby be unnecessarily dela yed.
R Familiarise yourself with thevo ice control sys-
te m functions before starting the journe y.
Wi th LINGU ATRO NIC, various applications in the
MBUX multimedia system are ope rable using
vo ice input. LINGU ATRO NIC is operational appr ox-
imately thirty seconds aTer the ignition is
switched on and is available forth e driver's seat
and front passenger seat.
The following multimedia system applications can
be operated:
R Telephone
R Text message and e-mail
R Navigation R
Address book
R Radio
R Media
R Vehicle functions S S
t
tar
ar ting LIN
ting LIN GUA
GUATR
TRONIC
ONIC #
Press rock er switch 1up. 254
254
MBUX multimedia system
R
Activation of the downloaded system update
by restarting the system
% If automatic soTware updates are activated,
th e system updates will be downloaded auto-
maticall y.
The multimedia system pr ovides a message when
a system update is available.
Yo u ha vethefo llowing selection options:
R Accept and install
The system update will be downloaded in the
background.
R Information
Information about the pending system update
is displa yed.
R Later
The system update can be downloaded man-
ually at a later time.
Deep syst Deep syst em updat
em updates
es
Deep system updates access vehicle or system
settings and can therefore only be car ried out
when theve hicle is stationary and the ignition is
switched o.. If
th e download of a deep system update is com-
ple ted and the downloaded system update is
re ady for installation, you will be informed of this
aTer the next ignition cycle, forex ample.
% Park theve hicle safely in a suitable location
before starting the installation.
Re quirements forth e installation:
R The ignition is switched o..
R Notes and warnings ha vebeen read and
accep ted.
R The electric parking brake is applied.
If all requ irements ha vebeen ful/lled, the down-
loaded system update is installed. The multimedia
system cannot be operated while the downloaded
system update is being installed and vehicle func-
tions are restric ted.
If errors should occur during the installation, the
multimedia system automatically attem ptsto
re store the pr evious version. If restoration of the
pr ev ious version is not possible, a symbol appears
on the media displa y.Consult a quali/ed special-
ist workshop toresol vethe problem. Se
Se
tting up a W
tting up a W i-F
i-Fi ho
i ho tspot
tspot R
R
eq
eq uir
uir ements:
ements:
R T
To se
o se t up t
t up t he W
he Wi-F
i-Fi connection of t
i connection of t he multime-
he multime-
dia sy
dia sy st
st em wit
em wit h e
h ext
xt er
er nal ho
nal ho tspo
tspots:
ts:your vehicle
does not ha vea permanent lyinstalled com-
munication module.
R The device tobe connected supports at least
one of the types of connection described.
Multimedia system: 4 © 5
Settings 5
System
5 Wi-Fi & Bluetooth
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating W
ating Wi-Fi
i-Fi #
Select Wi-Fi.
Connecting t
Connecting t he multimedia syst
he multimedia syst em wit
em with an e
h an ext
xter-
er-
nal ho
nal ho tspo
tspot using W
t using W i-Fi
i-Fi
The type of connection established must be selec-
te d on the multimedia system and on the device
to be connected. 260 260
MBUX multimedia system
#
Turn tyre sealant bottle 9aqu arter turn
clockwise. #
Insert the plug of /ller hose 3in soc ket5
of tyre sealant bottle 9.#
Turn /ller hose 3aqu arter turn clockwise. #
Remo vetheva lve cap from valve A onthe
fa ulty tyre. #
Screw union nut 4of /ller hose 3onto
va lve A. #
Insert plug 7into a 12 V soc ket in your vehi-
cle. #
Turn theke yto position 1inthe ignition loc k. #
Press on and o. switch 8onthe tyre in0a-
tion compressor.
The tyre in0ation compressor is switched on.
The tyre is in0ated. Firs t, tyre sealant is pum-
ped into the tyre. The pressure may brie0y rise
to appr oximately 500 kPa (5 bar/73 psi).
Do no Do no t switc
t switc h
ho.
o. t
the tyr
he tyr e
ein0ation
in0ation com
compr
pressor
essor
dur
dur ing t
ing t his phase!
his phase! #
Let the tyre in0ation compressor runfo r a
maximum of ten minutes.
The tyre should then ha veattained a tyre pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tyre sealant leaks out, make sure you clean the
a.ected area as quickly as possible. It is prefera-
ble touse clean water.
If yo uget tyre sealant on your clo thing, ha veit
cleaned as soon as possible with per chloroe thy-
lene.
If,
If, aTer aTer t
ten minut
en minut es, a tyr
es, a tyre pr
e pressur
essur e of 200 kPa
e of 200 kPa
(2.0 bar/29 psi) has no
(2.0 bar/29 psi) has no t been att
t been attained:
ained: #
Switch o. the tyre in0ation compressor. #
Unscr ewthe /lling hose from theva lve of the
defective tyre.
Please no tethat tyre sealant may leak out when
unscr ewing the /lling hose. #
Drive forw ards or in reve rseve ry slo wly for
appr oximately 10 m. #
Pump up the tyre again.
ATer a maximum of ten minutes the tyre pres-
sure must be at least 200 kPa (2.0 bar/
29 psi). &
W WARNING
ARNING Risk of accident due tothe
speci/ed tyre pressure not being attained
If th e speci/ed tyre pressure is not attained
aTer the speci/ed time, the tyre is too badly
damaged. The tyre sealant cannot repair the
tyre in this instance.
The braking and driving characteristics may be
gr eatly impaired. #
Do not continue driving. #
Consult a quali/ed specialist workshop. Breakdown assis
tance
317
317
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
High-voltage battery main-
tenance required urgently.
Without engine restart, con-
sult workshop *A
malfunction has occur red in the high-voltage batter y.
It will no lon ger be possible torestart the drive system once it has been switched o.. #
Do not switch o. the drive system; drive on tothe nearest quali/ed specialist workshop. V V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
d
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. 376
376
Display messages and
warning/indicator lamps
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Do not continue driving. Consult a quali/ed specialist workshop.
!
Release parking brake *T
hered! indicator lamp is 0ashing.
The electric parking brake is applied while you are driving:
R A condition for automatic release of the electric parking brake has not been ful/lled (/ page 186).
R You are per form ing emer gency braking using the electric parking brake (/ page 187). #
Check the conditions for automatic release of the electric parking brake. #
Release the electric parking brake manuall y.
!
Turn on the ignition to
release the parking brake *T
hered! indicator lamp is lit.
Yo u ha veattem pted torelease the electric parking brake with theve hicle switched o.. #
Switch on theve hicle.
J Check brake fluid level *T
here is insu1cient brake 0uid in the brake 0uid reser voir. &
W WARNING
ARNING Risk of an accident due tolow brake 0uid le vel
If th e brake 0uid le vel is too lo w,the braking e.ect and the braking characteristics may be impaired. #
Stop theve hicle as soon as possible, paying attention toroad and tra1c conditions. Do not continue driving. #
Consult a quali/ed specialist workshop. 386
386
Displ
aymessages and warning/indicator lamps