Page 377 of 485

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions &
W
WARNING
ARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena-
bled
If yo u secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena-
bled, the front passenger airbag can deploy in theev ent of an accident.
The child could be struck bythe airbag. #
Ensure, bo thbefore and during the journe y,that the status of the front passenger airbag is cor rect.
NEVER use a rear wa rdfacing child restraint on a seat pro tected byan ACTIVE AIRBAG in front of it, DEATH or
SERIOUS INJURY tothe CHILD can occur. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 50).#
If necessar y,consult a quali/ed specialist workshop immediatel y.
PRE-SAFE inoperative See
Owner's Manual *
The PRE‑SAFE ®
functions are malfunctioning. #
Consult a quali/ed specialis two rkshop. 374 374
Displ
aymessages and warning/indicator lamps
Page 378 of 485
K
K
e
ey
y Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Replace key *H
aveth eke yre placed. #
Consult a quali/ed specialist workshop.
Á
Change key batteries *T
hekey battery is dischar ged. #
Replace the battery (/ page 76).
Á Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 155). Display messages and
warning/indicator lamps
375
375
Page 379 of 485

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
The key is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y de tection function has a malfunction due toa st rong radio signal source: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 155).
Á Key being initialised Please
wait *T
hevehicle is processing in order to teach in the new key. #
Wait until processing is comple te.
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 155). 376 376
Display messages and
warning/indicator lamps
Page 380 of 485
SoT
SoT
t
t op
op Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
K
While stationary, apply the
brake before operating the
soft top *T
hevehicle is stationary and you try toopen or close the soT top. #
Depress the brake pedal. #
Operate the soT top operation again until the soT top opens or closes comple tely.
K
Soft top Operation only up
to 60 km/h *I
fyo u drive at speeds greater than 60 km/h you cannot open or close the soT top. #
Do not drive at speeds greater than 60 km/h. #
Fully open or close the soT top.
K
Soft top lowering *T
he soT top is not fully opened or closed. The hydraulics are depressuring. #
Fully open or close the soT top. Display messages and
warning/indicator lamps
377 377
Page 381 of 485
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
K
Open/close soft top com-
pletely *T
he soT top is not loc ked. If you drive at speeds greater than 60 km/h you cannot open or close the soT top. #
Do not drive at speeds greater than 60 km/h. #
Fully open or close the soT top.
K
12 V battery See Owner's
Manual *T
he on-board elect rical system voltage is too lo w. #
Start theve hicle.
J
Close boot separator *T
he boot separator is open. #
Close the boot separator. 378 378
Display messages and
warning/indicator lamps
Page 382 of 485
Lights
Lights
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
:
Left dipped beam (examp le) *T
he cor responding light source is defecti ve. #
Drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when all the light-emitting diodes
in the light are faulty.
: Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a quali/ed specialist workshop.
*V Vehicles wit ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:a fuse may ha veblown. #
Stop theve hicle in accordance with the tra1c conditions. #
Check the fuses and replace them if necessary (/ page 332).
:
Automatic driving lights
inoperative *T
he light sensor for automatic driving lights is malfunctioning. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
379
379
Page 383 of 485
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
:
Active Light System inoper-
ative *T
he active headlamps are malfunctioning. #
Consult a quali/ed specialist workshop.
:
Switch on headlamps *Y
ou are driving without lo w-beam headlamps. #
Turn the light switch totheL orà position.
:
Switch off lights *Y
ou are leaving theve hicle and the lights are still switched on. #
Turn the light switch totheà position.
:
Intelligent Light System
inoperative *T
he Intelli gent Light System is malfunctioning. The lighting system continues tofunction proper lywithout the functions
of the Intelligent Light System. #
Consult a quali/ed specialist workshop. 380 380
Displ
aymessages and warning/indicator lamps
Page 384 of 485

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Adaptive Highbeam Assist
currently unavailable See
Owner's Manual *A
daptive Highbeam Assist is tempo rarilyuna vailable.
The system limits ha vebeen reached (/ page 130).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist available again displaymessage will appear. #
Drive on #
Operate the high beam manually until Adaptive High Beam Assist is available again.
Adaptive Highbeam Assist
inoperative *A
daptive Highbeam Assist is malfunctioning. #
Drive on
or #
Stop theve hicle in accordance with the tra1c conditions and restart theve hicle. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop. #
Until then, operate the high beam manuall y.
Adaptive Highbeam Assist
Plus currently unavailable
See Owner's Manual *A
daptive Highbeam Assist Plus is tempo rarilyuna vailable.
The system limits ha vebeen reached (/ page 131).
Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam
Assist Plus available again displaymessage will appear. #
Drive on #
Operate the high beam manually until Adaptive High Beam Assist Plus is available again. Displ
aymessages and warning/indicator lamps
381
381