2021 MERCEDES-BENZ E-CLASS CABRIOLET warning

Engine oil
Engine oil
/lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
E 200 4MATIC 6.0 litres
E 220 d
E 220 d 4MATIC 6.3 litres
E 300 d 4MATIC 6.5 litres
E 400 d 4MATIC 7.5 litres
E 450 4MATIC 8.5 litres
All other model s6 .6 litres N No
ot
tes on br
es on br ak
ake
e0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 358). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 358). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1 Te
ch nical data
365 365

-
Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N
NOOTE
TE Overheating at high outside tempe r-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C) R
A maximum of 55% (antif reeze pr otection
down to-45°C) N
No ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 358). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. 366
366
Te
ch nical data

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the¨ symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Gorthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
To e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button G. Display messages and
warning/indicator lamps
371
371

Occupant safe
Occupant safe
ty
ty Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
6
Restraint sys. malfunction
Consult workshop *T
herestraint system is malfunctioning (/ page 40). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. 6
Front left malfunction Con-
sult workshop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 40). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. 6
Left windowbag malfunc-
tion Consult work-
shop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 40). &
W WARNING
ARNING Risk of injury or death due tothe head airbag malfunctioning
If th e head airbag is malfunctioning, it might be triggered unintentionally or might not deploy at all in theev ent of
an accident. #
Have the head airbag checked and repaired immediately at a quali/ed specialist workshop. 372
372
Displ
aymessages and warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Front-passenger airbag dis-
abled See Owner's Manual *T
he front passen ger airbag has been disabled even though an adult or a person of adult build is on the front passenger
seat. If additional forc es are applied tothe seat, thewe ight the system de tects may be too lo w. &
W WARNI NG
ARNI NG‑ Risk of injury or evenfata l injury when the front passenger airbag is disabled
If th e front passenger airbag is disabled, It will not be deplo yed in theev ent of an accident and cannot per form its
intended pr otective function.
A person in the front passenger seat could then, forex ample, come into contact with theve hicle interior, especially
if th e person is sitting too close tothe dashboard. #
Beawa reofthe status of the front passenger airbag bo thbefore and during the journe y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 50).#
If necessar y,consult a quali/ed specialist workshop immediatel y.
Front-passenger airbag
enabled See Owner's Man-
ual *T
he front passen ger airbag will be enabled while theve hicle is in motion in thefo llowing situations:
R even when a child, a small adult or an object weighing less than the system weight thre shold is located on the front
passenger seat
R even when the front passenger seat is not occupied
The system may de tect objects or forc es that are adding tothewe ight applied tothe seat. Display messages and
warning/indicator lamps
373 373

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions &
W
WARNING
ARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena-
bled
If yo u secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena-
bled, the front passenger airbag can deploy in theev ent of an accident.
The child could be struck bythe airbag. #
Ensure, bo thbefore and during the journe y,that the status of the front passenger airbag is cor rect.
NEVER use a rear wa rdfacing child restraint on a seat pro tected byan ACTIVE AIRBAG in front of it, DEATH or
SERIOUS INJURY tothe CHILD can occur. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 50).#
If necessar y,consult a quali/ed specialist workshop immediatel y.
PRE-SAFE inoperative See
Owner's Manual *
The PRE‑SAFE ®
functions are malfunctioning. #
Consult a quali/ed specialis two rkshop. 374 374
Displ
aymessages and warning/indicator lamps

K
K
e
ey
y Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Replace key *H
aveth eke yre placed. #
Consult a quali/ed specialist workshop.
Á
Change key batteries *T
hekey battery is dischar ged. #
Replace the battery (/ page 76).
Á Key not detected (white dis-
play message) *T
hekey is cur rently unde tected. #
Change the location of theke y in theve hicle. #
Ifth eke y is still not recognised, place it in the slot for starting with theke y (/ page 155). Display messages and
warning/indicator lamps
375
375

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Á
Key not detected (red dis-
play message) *T
hekey cann otbe de tected and may no longer be in theve hicle.
The key is no lon ger in theve hicle and you switch o. theve hicle:
R You can no longer start theve hicle.
R You cannot centrally lock theve hicle. #
Ensu rethat theke y is in theve hicle.
If th eke y de tection function has a malfunction due toa st rong radio signal source: #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Place theke y in the slot for starting the engine with theke y (/ page 155).
Á Key being initialised Please
wait *T
hevehicle is processing in order to teach in the new key. #
Wait until processing is comple te.
Place the key in the
marked space See Owner's
Manual *K
eydetection is malfunctioning. #
Change the location of theke y in theve hicle. #
Place theke y in the slot for starting the engine with theke y (/ page 155). 376 376
Display messages and
warning/indicator lamps