Fu
rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ata quali/ed specialist workshop &
W
WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. &
W
W ARNING
ARNING Risk of injury from fuels
Fu els are poisonous and hazardous toyour
health. #
Do not swallow fuel or let it come into
contact with skin, eyes or clo thing. #
Do not inhale fuel vapour. #
Keep children away from fuel. #
Keep doors and windo wsclosed during
th ere fuelling process.
If yo u or other people come into contact with
fuel, obser vethefo llowing: #
Immediate lyrinse fuel o. your skin with
soap and water. #
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical at tention
immedia tely. #
Ifyo u swallow fuel, seek medical atten-
tion immediatel y.Do not induce vomit-
ing. #
Change immediately out of clo thing that
has come into contact with fuel. Flexible-fuel
vehicles can be refuelled wi th thefo l-
lowing fuel types:
R unleaded petrol
R E85 fuel R
a mixture of E85 fuel and unleaded petrol
Flexible-fuel vehicles can be identi/ed bythe
Et
Et hanol up t
hanol up t o E85
o E85sticker on the inside of the fuel
/ller 0ap.
Depending on the countr y,the fuels you can use
in your vehicle may di.er from the information in
th e Owner's Manual. The fuels that ha vebeen
appr ovedfo ryo ur vehicle can be found on the
inst ruction label on the inside of the fuel /ller 0ap. F F
uel
uel Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a pe
h a pet-
t-
r
r ol engine
ol engine
No tethe inst ructions about operating 0uids
(/ page 396).
* NO
NOTE
TEDamage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using unleaded, sulphu r-free
spar k-ignition engine fuel that conforms Te
ch nical data
397
397
#
Only use AdBlue ®
in acco rdance with
ISO 22241. #
Do not dilu teAd Blue ®
wi th wa ter. #
Do not use additive-enhanced AdBlue ®
. *
N
NO OTE
TE Dama geand malfunctions due to
impurities in AdBlue ® Consequences of impurities in
AdBlue ®
:
R increased emission values
R damage tothe catalytic con verter
R NOx exhaust gas aTertreatment malfunc-
tions #
Avoid impurities in AdBlue ®
. Ad
Blue ®
residues cr ystallise aTer a period of
time, and contaminate the sur faces with which
th ey come into contact. Clean the dirty sur faces
with water as soon as possible.
When you open theAd Blue ®
tank, small amounts
of ammonia vapour may escape. Do not inhale any ammonia
vapours that may be released. Only
/ll theAd Blue ®
tank in well-ventilated areas.
A
A dBlue
dBlue ®
®
/lling
/lling capacity and consump
capacity and consump tion
tion
Tot
Tot al capacity of A
al capacity of A dBlue
dBlue®
®
t
tank
ank Model
Tot
Mode lT otal capacity
al capacity
All model s2 3.8 litres A
A
dBlue
dBlue ®
®
consump
consump tion
tion
The average AdBlue ®
consu mption is between 1%
and 5% of fuel consum ption. Like fuel consump-
tion, AdBlue ®
consu mption is high lydependent
upon driving style and operating conditions. For
th is reason, your vehicle's actual consu mption /g-
ures under da y-to -day operating conditions may
di.er from the consum ption /gures calculate d.
The frequency at which you will ha veto to p up
Ad Blue ®
will also vary. Ha vetheAd Blue ®
supply
ch ecked at a quali/ed specialist workshop before
making jou rney s outside of Europe. Before a lon-
ge r st ayoutside of Europe, consult a quali/ed
specialist workshop. A
A
dBlue
dBlue ®
®
r
rang
ang e and
e and /ll
/lllev
level
el
The AdBlue ®
/ll le vel and range can be displa yed
via the on-board computer. The AdBlue ®
range
sh ow n depends strongly on the driving style and
operating conditions. The actual range can there-
fo re deviate from thera nge cur rently displa yed in
th e on-board computer. The information supplied
in the operator's manual rega rding there ser ve
qu antity at the /rst display warning and on the
minimum top-up quantity when the fuel tank is
em pty is also tobe understood as guide values. Engine oil
Engine oil
N
No
ot
tes on engine oil
es on engine oil
Obser vethe no tes on operating 0uids
(/ page 396). Te
ch nical data
401
401
Engine oil
Engine oil
/lling
/llingcapacity
capacity Model
Model
Capacity
Capacity
B 160
B 180, (manual and
automatic transmis-
sion)
B 200, (manual and
automatic transmis-
sion)
B 200 4MATIC 5.1 litres
B 250
B 250 4MATIC 5.5 litres
All other model s6 .8 litres The speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. Engine oil Engine oil
speci/cation
speci/cation (plug-in h
(plug-in hybr
ybrid)
id) Model
Model
MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Appr ov
Approv al
al
B 250 e2 29.51, 229.52,
229.61, 229.71*, 229.72 *
re commended forth e lo west possible fuel con-
su mp tion
To achie vethe lo west possible fuel consum ption,
it is recommended touse the engine oil speci/ca-
tions mar ked in theta ble forth e lo westSA E vis-
cosity class. Obser veany possible restrictions of
th e appr ovedSA E viscosity classes.
% Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of engine oils with MB-F reigabe or MB-
Appr oval 229.31 or ACEA C3 once onl y.
Engine oil capacity (plug-in h
Engine oil capacity (plug-in h ybr
ybrid)
id) Model
Model
Capacity
Capacity
B 250 e4 .5 litres The speci/e
d/lling capacity refers to an oil
ch ange with the oil /lter. N
No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 396). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Te
ch nical data
403 403
Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 396). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
yo uto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection. Information on coolant is
available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. #
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop. Proportion of antif
reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) N No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 396). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. 404
404
Te
ch nical data
Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R 00A4 Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the00A4 symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Porthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
T o e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button P. 412
412
Display messages and
warning/indicator lamps
Occupant safe
Occupant safe
ty
ty Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
0075
Restraint sys. malfunction
Consult workshop *T
herestraint system is malfunctioning (/ page 47). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. Plug-in h
Plug-in h
ybr
ybrid:
id: &
D
DAN
AN GER
GER Risk of fatal injuries due torestraint system malfunctions
Co mp onents in there straint system ma y be activated unintentionally or not deploy as planned in an accident. In
th eeve nt of an accident, the high-voltage on-board electrical system may not be deactivated as intended.
Yo u may su.er an electric shock if youto uch the damaged components of the high-voltage on-board electrical
system. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. #
ATer an accident, switch o. theve hicle immediatel y. Display messages and
warning/indicator lamps
413
413
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
0075
Front left malfunction Con-
sult workshop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 47). &
W WARNING
ARNING Risk of injury due tomalfunctions in there straint system
Co mp onents in there straint system ma y be activated unintentionally or not deploy as intended in an accident. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. Plug-in h
Plug-in h
ybr
ybrid:
id: &
D
DAN
AN GER
GER Risk of fatal injuries due torestraint system malfunctions
Co mp onents in there straint system ma y be activated unintentionally or not deploy as planned in an accident. In
th eeve nt of an accident, the high-voltage on-board electrical system may not be deactivated as intended.
Yo u may su.er an electric shock if youto uch the damaged components of the high-voltage on-board electrical
system. #
Have there straint system checked and repaired immediately at a quali/ed specialist workshop. #
ATer an accident, switch o. theve hicle immediatel y.414
414
Display message
s andwarning/indicator lamps
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
0075
Left windowbag malfunc-
tion Consult work-
shop (examp le) *T
he cor responding restraint system is malfunctioning (/ page 47). &
W WARNING
ARNING Risk of injury or fatal injury due toa malfunction in the windowbag
The windowbag might be triggered unintentionally or might not be triggered at all in theev ent of an accident. #
Have the windowbag checked and repaired immediately at a quali/ed specialist workshop. Front-passenger airbag dis-
abled See Owner's Manual
*T
he front passen ger airbag has been disabled even though an adult or a person of adult build is on the front passenger
seat. If additional forc es are applied tothe seat, thewe ight the system de tects may be too lo w. &
W WARNI NG
ARNI NG‑ Risk of injury or evenfata l injury when the front passenger airbag is disabled
If th e front passenger airbag is disabled, It will not be deplo yed in theev ent of an accident and cannot per form its
intended pr otective function.
A person in the front passenger seat could then, forex ample, come into contact with theve hicle interior, especially
if th e person is sitting too close tothe dashboard. #
Beawa reofthe status of the front passenger airbag bo thbefore and during the journe y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Make sure that no objects are trapped under the front passenger seat. #
Check the status of automatic front passenger airbag actuation (/ page 57).#
If necessar y,consult a quali/ed specialist workshop immediatel y. Display messages and
warning/indicator lamps
415
415