Opening and closing t
Opening and closing t
he bonnet
he bonnet&
W
WARNING
ARNING Risk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and inju ry
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. &
W WARNING
ARNING Risk of burns when opening the
bonnet
If yo u open the bonnet in theev ent of an over-
heated engine or /re in the engine compart-
ment, thefo llowing situations may occur:
R You may come into contact with hot gases.
R You may come into contact with other
escaping hot operating 0uids. #
Before opening the bonnet, allow the
engine tocool down. #
Intheev ent of a /re in the engine com-
partment, keep the bonnet closed and
call the /re service. &
W
WARNING
ARNING Risk of injury due tomoving
parts
Components in the engine compartment may
continue torun or start unexpectedly even
when the drive system is switched o..
Obser vethefo llowing if you must open the
bonnet: #
Switch o. theve hicle. #
Neverto uch the danger zones sur round-
ing moving components, e.g. thero tation
area of thefa n. #
Remo vejewe llery and watches. #
Keep items of clo thing and hair away
from moving pa rts. &
W
WARNING
ARNING Risk of injury from touching
components under voltage
The ignition system and the fuel injection sys-
te m operate at high voltage. You could receive
an elect ric shoc k. #
Neverto uch ignition system or fuel injec-
tion system components when theve hi-
cle is switched on. The live components include
thefo llowing, for
ex ample:
R Ignition coils
R Fuel injectors 338
338
Maintenance and care
R
Electric lines tothe ignition coils and the fuel
injectors &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
W ARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. Opening t
Opening t
he bonnet
he bonnet #
Torelease the bonnet, pull on handle 1. #
Push yellow handle 1onthe bonnet catch to
th e leT as far as it will go (palm down wards).
LiT the bonnet until it is automatically raised
by the pneumatic spring.
Closing t
Closing t he bonnet
he bonnet #
Lowe rth e bonnet and let it drop from a height
of appr oximately 20 cm. Maintenance and care
339
339
#
Ifth e bonnet can still be liTed slightl y,open
th e bonnet again and close it with a little force
until it engages cor rectl y. Engine oil
Engine oil
Chec
Chec
king t
king t he engine oil lev
he engine oil lev el using t
el using the on-board
he on-board
com
com put
puter
er
R
R eq
eq uir
uir ements:
ements:
R The engine has been warmed up.
R The vehicle is par ked on a le vel sur face.
R The engine is running at idle speed.
R The bonnet is closed.
The engine oil le vel is de term ined during driving.
De term ining the engine oil le vel can take up to
30 minutes with a normal driving style and even
longer with an active driving style. On-board computer:
4 Service 5
Engine oil level
One of thefo llowing message s will appear onthe
inst rument displa y:
R Engine oil level Measuring now: measu rement
of the oil le vel is not yet possible. #
Repeat there qu est aTer a maximum of
30 minutes' driving.
R Engine oil level OK andthe bar display for
indicating the oil le vel on the inst rument dis-
play is green and is between "min" and "max":
th e oil le vel is cor rect.
R Engine oil level Add 1,0 l andthe bar display
fo r indicating the oil le vel on the inst rument
display is orange and is below "min": #
Add 1 l of engine oil.
R Reduce engine oil level andthe bar display for
indicating the oil le vel on the inst rument dis-
play is orange and is abo ve"max": #
Drain o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
R For engine oil level turn on ignition #
Switch on theve hicle tocheck the engine oil
le ve l.
R Engine oil level System inoperative: The oil
leve l sensor is defective or not connected. #
Consult a quali/ed specialist workshop.
R Engine oil level System currently unavail. #
Close the bonnet.
T T opping up engine oil
opping up engine oil &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. 340
340
Maintenance and care
#
Pull plug 7with the cable and /ller hose 3
out of the tyre in0ation compressor housing. #
Insert tyre sealant bottle 9in soc ket6 of
th e tyre in0ation compressor in such a way
th at there d ar row on tyre sealant bottle 9
matches there d ar row on the tyre in0ation
compressor. #
Turn tyre sealant bottle 9aqu arter turn
clockwise. #
Insert the plug of /ller hose 3in soc ket5
of tyre sealant bottle 9. #
Turn /ller hose 3aqu arter turn clockwise. #
Remo vetheva lve cap from valve A onthe
fa ulty tyre. #
Screw union nut 4of /ller hose 3onto
va lve A. #
Insert plug 7into a 12 V soc ket in your vehi-
cle. #
Turn theke yto position 0047inthe ignition loc k. #
Press on and o. switch 8onthe tyre in0a-
tion compressor.
The tyre in0ation compressor is switched on.
The tyre is in0ated. Firs t, tyre sealant is pum-
ped into the tyre. The pressure may brie0y rise
to appr oximately 500 kPa (5 bar/73 psi).
Do no Do no t switc
t switc h
ho.
o. t
the tyr
he tyr e
ein0ation
in0ation com
compr
pressor
essor
dur
dur ing t
ing t his phase!
his phase! #
Let the tyre in0ation compressor runfo r a
maximum of ten minutes.
The tyre should then ha veattained a tyre pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tyre sealant leaks out, make sure you clean the
a.ected area as quickly as possible. It is prefera-
ble touse clean water.
If yo uget tyre sealant on your clo thing, ha veit
cleaned as soon as possible with per chloroe thy-
lene.
If, If, aTer
aTer t
ten minut
en minut es, a tyr
es, a tyre pr
e pressur
essur e of 200 kPa
e of 200 kPa
(2.0 bar/29 psi) has no
(2.0 bar/29 psi) has no t been att
t been att ained:
ained: #
Switch o. the tyre in0ation compressor. 358
358
Breakdown assistance
T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is under the load compartment
0oor. F
F
itting and r
itting and r emo
emo ving t
ving t heto
he towing eye
wing eye #
Press the mark on co ver1 inwa rds and
re mo ve. #
Screw intheto wing eye clockwise as far as it
will go and tighten.
V
V ehicles wit
ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:vehicles with a trailer
hitch do not ha veare ar brac ketfo rth eto wing
ey e. Fasten theto w bar tothe trailer hitch. #
Make sure that co ver1 engages in the
bumper when youre mo vetheto wing eye.
* N
NOOTE
TE Damage totheve hicle due toincor-
re ct use of theto wing eye or trailer hitch When a
towing eye or trailer hitch is used to
re co ver a vehicle, theve hicle may be damaged
in the process. #
Only use theto wing eye or trailer hitch to
to w awa y or tow start theve hicle. #
Do not use theto wing eye or trailer hitch
to to wtheve hicle during reco very. T
T
o
o w
w -st
-st ar
arting t
ting t he v
he vehicle
ehicle V V
ehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission
ansmission
* NO
NOTE
TE Damage tothe automatic transmis-
sion due to tow-starting The au
tomatic transmission may be damaged
in the process of tow- starting vehicles with
automatic transmission. #
Vehicles with automatic transmission
must not be tow- star ted. #
Vehicles with an automatic transmission must
not be tow- star ted.
V V ehicles wit ehicles wit h manual tr
h manual tr ansmission
ansmission #
Obser vethe no tes on towing away
( / page 367). #
If necessar y,allow the engine and exhaust
system tocool down. #
Swit chon the ignition. #
Engage second gear. #
Release the electric parking brake. 370
370
Breakdown assistance
Fu
rther information on appr oved operating 0uids:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R Ata quali/ed specialist workshop &
W
WARNING
ARNING Risk of /re or explosion from
fuel
Fu els are highly 0ammable. #
Fire , naked 0ames, smoking and creating
spar ksmust be avoided. #
Before and during refuelling, switch o.
th eve hicle and, if /tted, the stationary
heater. &
W
W ARNING
ARNING Risk of injury from fuels
Fu els are poisonous and hazardous toyour
health. #
Do not swallow fuel or let it come into
contact with skin, eyes or clo thing. #
Do not inhale fuel vapour. #
Keep children away from fuel. #
Keep doors and windo wsclosed during
th ere fuelling process.
If yo u or other people come into contact with
fuel, obser vethefo llowing: #
Immediate lyrinse fuel o. your skin with
soap and water. #
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical at tention
immedia tely. #
Ifyo u swallow fuel, seek medical atten-
tion immediatel y.Do not induce vomit-
ing. #
Change immediately out of clo thing that
has come into contact with fuel. Flexible-fuel
vehicles can be refuelled wi th thefo l-
lowing fuel types:
R unleaded petrol
R E85 fuel R
a mixture of E85 fuel and unleaded petrol
Flexible-fuel vehicles can be identi/ed bythe
Et
Et hanol up t
hanol up t o E85
o E85sticker on the inside of the fuel
/ller 0ap.
Depending on the countr y,the fuels you can use
in your vehicle may di.er from the information in
th e Owner's Manual. The fuels that ha vebeen
appr ovedfo ryo ur vehicle can be found on the
inst ruction label on the inside of the fuel /ller 0ap. F F
uel
uel Inf
Inf
or
ormation on fuel q
mation on fuel q uality f
uality for v
or vehicles wit
ehicles wit h a pe
h a pet-
t-
r
r ol engine
ol engine
No tethe inst ructions about operating 0uids
(/ page 396).
* NO
NOTE
TEDamage caused bythe wrong fuel Even small amounts of
the wrong fuel could
re sult in damage tothe fuel system, the
engine and the emission control system. #
Only refuel using unleaded, sulphu r-free
spar k-ignition engine fuel that conforms Te
ch nical data
397
397
V
V
ehicle
ehicle Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
0072
Vehicle is operational
Switch off ignition before
exiting *Y
ou are leaving theve hicle in a ready-to-drive state. #
Get out of theve hicle, secure it against rolling away and take theke y with you. #
Ifyo u do not lea vetheve hicle, switch o. the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
te ry may dischar geand starting the engine may be possible only with the help of a second battery (jump start).
ï
Check trailer hitch
lock (white display message) *T
he trailer hitch is not operational during a jou rney with a trailer. &
W WARNING
ARNING Risk of an accident if the ball neck is not loc ked
The trailer may become de tach ed. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Uncouple the trailer and secure it against rolling away. #
Initiate a new swivelling procedu reand do not re-couple the trailer until the display message disappears. #
Initiate a new swivel mo vement (/ page 274). #
When the display message disappears, couple up the trailer and drive on.
If th e display message does not disappear, the trailer hitch is malfunctioning and the ball neck is not loc ked. 432
432
Display messages and
warning/indicator lamps
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
T
T o r
o r elease:
elease: #
Ifth e conditions for automatic release are ful/lled and the electric parking brake is not released automaticall y,
re lease the electric parking brake manually (/ page 221).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a quali/ed specialist workshop.
0024
Release parking brake *T
hered0024 indicator lamp is 0ashing.
The electric parking brake is applied while you are driving:
R A condition for automatic release of the electric parking brake has not been ful/lled (/ page 220).
R You are per form ing emer gency braking using the electric parking brake (/ page 221). #
Check the conditions for automatic release of the electric parking brake. #
Release the electric parking brake manuall y.
0024
Turn on the ignition to
release the parking brake *T
hered0024 indicator lamp is lit.
Yo u ha veattem pted torelease the electric parking brake with theve hicle switched o.. #
Switch on theve hicle. Displ
aymessages and warning/indicator lamps
449 449