2021 MERCEDES-BENZ AMG GT COUPE clock

Loc
Loc
king/unloc
king/unloc king t
king the dr
he dr iv
iver's door wit
er's door wit h t
h the
he
emerg
emerg encykey
ency key %
Ifyo u wish tolock theve hicle entirely using
th e emer gency key,/rst press the button for
locking from the inside while the driver's door
is open. Then proceed tolock the driver's
door using the emer gency key. #
Remo vethe emer gency key (/ page 82). #
Inse rtthe emer gency key as far as it will go
into opening 1inthe co ver. #
Pull and hold the door handle. #
Pull the co ver on the emer gency key as
straight as possible away from theve hicle until
it re leases. #
Release the door handle. #
T To unloc o unloc k:
k:turn the emer gency key anti-cloc k-
wise toposition 1. #
T
To loc
o loc k:
k:turn the emer gency key clockwise to
position 1. #
Carefully press the co ver onto the lock cylin-
der until it engages and is seated /rml y. Load com
Load com
par
partment
tment Opening t
Opening t
he t
he tailg
ailgate
ate &
D
DAN
AN GER
GER Risk of poisoning from exhaust
ga ses
Combustion engines emit poisonous exhaust
ga ses, such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if theta il-
ga te is open when theve hicle is running,
especially if theve hicle is in motion. #
Always switch o. theve hicle before
opening theta ilgate. #
Never drive with theta ilgate open. 88
88
Opening and closing

%
When theve hicle is star ted again or transmis-
sion position his engaged again, standard
re cuperation is automatical lyset. #
Press display button 1.
The display button sho ws thed symbol
with a thre e-part segment display for setting
th ere cuperation.
% Ifth e display is grey ed out, there qu irements
are not met and setting is not possible.
When thed symbol is shown with a red !!
on the display button, there ge nerative brake
system is malfunctioning. Obser vethe infor-
mation on warning lamps and display mes-
sages which are shown in the Instrument Dis-
pla y. #
T
To incr
o incr ease r
ease r ecuper
ecuper ation:
ation:turnrotary switch
2 clockwise in theq direction. #
T
To decr
o decr ease r
ease recuper
ecuper ation:
ation:turnrotary switch
2 anti-clockwise in the± direction.
The following recuperation le vels are available and
are shown on displ aybutton 1:
R d and no segments light up: no recupera-
tion, theve hicle rolls freely R
d and one segment lights up: standard
re cuperation
R d and two segments light up: increased
re cuperation, st rong deceleration in overrun
mode, e.g. for driving on downhill gradients
R d andthre e segments light up: maximum
re cuperation, maximum decele ration in over-
ru n mode
% On downhill gradients, the intensity of the
re cuperation is adjus ted as needed: the
steeper the incline, the higher there cupera-
tion. Depending on the situation, it may ne ver-
th eless be necessary toadditionally depress
th e brake pedal. F
F
unction of t
unction of t he hap
he haptic acceler
tic acceler at
ator pedal (plug-in
or pedal (plug-in
h
h ybr
ybr id)
id) The haptic accelerator pedal has an additional
point of resis tance follo we dby increased pedal
re sis tance tohelp you drive fully electricall y.
Characteristics of the additional point of resist-
ance:
R Available only in drive prog ram Î R
Is used when the electric mo tor po werav aila-
bility displ ayis full
R Indicates the maximum available elect ric per-
fo rm ance
The subsequent increased pedal resis tance
indicates that the journey is being continued
with the combustion engine. AMG P
AMG P
erf
erfor
ormance e
mance e xhaus
xhaust systt system
em F
F
unction of t
unction of t he AMG P
he AMG Perf
erfor
ormance e
mance e xhaus
xhaust systt system
em
Yo u can choose between thefo llowing sound
ch aracteristics forth e AMG Performance exhaust
system:
R Balanced:
Balanced: comfortable sound characteristic
R Pow
Pow er
erful:
ful: sport sound characteristic
Plug-in h
Plug-in h ybr
ybrid:
id:The sound characteristic has an
in0uence on the drive noises in electric mode. Driving and parking
179
179

1
Fuel /ller 0ap
2 Brac ketfo r fuel /ller cap
3 Tyre pressure table
4 QR code forre scue card
5 Fuel type #
Press on the back area of fuel /ller 0ap 1.#
Turn the fuel /ller cap anti-clockwise and
re mo veit. #
Insert fuel /ller cap from abo veinto brac ket
2 . #
Comple tely insert the pump nozzle into the
ta nk /ller nec k,hook in place and refuel. #
Only /ll the fuel tank until the pump nozzle
switches o.. #
Replace the cap on the /ller neck and turn
clockwise until it engages audibl y. #
Close fuel /ller 0ap 1. Char
Char
ging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery (plug-in
y (plug-in
h
h ybr
ybr id)
id) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt ery
ery *
N
NOOTE
TE High-voltage battery damage due to
leaving theve hicle idle for lengt hyperiods
of time Lithium-ion batteries
experience a natural self-
dischar ge.
Exhausti vedischarging can therefore occur if
th eve hicle is idle for se veral months. This can
damage the high-voltage batter y. #
Toavo id damage, please obser vethefo l-
lowing recommendations when handling
th e high-voltage batter y. *
N
NO
OTE
TE Accelerated ageing of the high-volt-
age battery due tonot observing thefo l-
lowing recommendations As a
result of its basic characteristics, the
storage capacity of and the amount of energy
av ailable from the high-voltage battery
decrease over the course of its life. As a
re sult, the maximum electrical range that can
be achie vedby theve hicle is reduced and its
maximum electrical output can be impaired.
The following factors could accelerate the age-
ing of the high-voltage batter y:
R a high le vel of charge , especially if the
ve hicle is idle for a lengt hyperiod of time
R leaving theve hicle idle for lengt hyperiods
at high ambient temp eratures #
Toavo id accelerated ageing, please
obser vethefo llowing recommendations
when handling the high-voltage batter y. Driving and parking
191
191

%
Depending on driving style, theve hicle con-
sumes up to0.8 litre of oil per 1000 km. The
oil consum ption may be higher than this when
th eve hicle is new or if you frequently drive at
high engine speeds. 8-cylinder engine 6-cylinder engine
#
Turn cap 1anti-clockwise and remo veit. #
Top up the engine oil. #
Replace cap 1and turn it clockwise until it
engages. #
Check the oil le vel again (/ page 340). Chec
Chec
king t
king t he coolant lev
he coolant lev el
el &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. &
W
WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Let the mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. #
Only ha vethe coolant checked or re/lled at a
qu ali/ed specialist workshop. 342
342
Main
tenance and ca re

T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is under the load compartment
0oor under co ver1.
Depending on theve hicle equipment, theto wing
ey e may be located at a di.erent position in the
load compartment. F
F
itting and r
itting and r emo
emoving t
ving t heto
he towing eye
wing eye #
T
To
o /t
/t t
the fr
he fr ontto
ont towing ey
wing eye:
e: pull out co ver1. #
T
To
o /t
/t t
the r
he r earto
ear towing ey
wing eye:
e: press the mark on
co ver1 inwa rds and remo ve. #
Screw intheto wing eye clockwise as far as it
will go and tighten. V
V
ehicles wit
ehicles wit h a tr
h a trailer hitc
ailer hitc h:
h:vehicles with a trailer
hitch do not ha veare ar brac ketfo rth eto wing
ey e. Fasten theto w bar tothe trailer hitch. #
Make sure that co ver1 engages in the
bumper when youre mo vetheto wing eye.
* N NOOTE TE Damage totheve hicle due toincor-
re ct use of theto wing eye or trailer hitch When a
towing eye or trailer hitch is used to
re co ver a vehicle, theve hicle may be damaged
in the process. #
Only use theto wing eye or trailer hitch to
to w awa y or tow start theve hicle. #
Do not use theto wing eye or trailer hitch
to to wtheve hicle during reco very. Breakd
own assistance
367
367

R
Fuse box on the driver's side of the cockpit
(/ page 370)
R Fuse box in the front passenger foot we ll
(/ page 370)
R Fuse box in the load compartment on the
ri ght-hand side of theve hicle, when vie wed in
th e direction of tr avel (/ page 370) Opening and closing t
Opening and closing t
he fuse bo
he fuse box in t
x in the engine
he engine
com
com par
partment
tment R
R
eq
eq uir
uir ements:
ements:
R A dry clo thand a scr ewdriver are available.
Obser vethe no tes on elect rical fuses
(/ page 368).
Opening
Opening &
W
WARNING
ARNING Risk of injury from using the
windscreen wipers when the bonnet is
open
If th e windscreen wipers start moving when
th e bonnet is open, you could be trapped by
th e wiper linkage. #
Always switch o. the windscreen wipers
and theve hicle /r stifyo u need toopen
th e bonnet. #
Turn clips 2on co ver1 aqu arter-turn to
anti-clockwise. #
Pull co ver1 upwards in the direction of the
ar ro w. #
Remo veany existing moisture from the fuse
box using a dry clo th. #
Loosen scr ews4 and remo vefuse box lid 3
from theto p.
Closing
Closing #
Check whe ther the seal is positioned cor rectly
in cap 3. Breakdown assistance
369
369

#
Insert lid 3into the brac ket at there ar of the
fuse box. #
Fold down lid 3ofthe fuse box and tighten
scr ews4. #
Insert co ver1 on bo thsides. #
Turn clips 2on co ver1 aqu arter-turn
clockwise. #
Close the bonnet. Opening and closing t
Opening and closing t
he fuse bo
he fuse box in t
x in the coc
he coc kpit
kpit R
Obser vethe no tes on elect rical fuses
(/ page 368).
The fuse box is on the driver's side on the side of
th e cockpit under a co ver. #
Toopen and close it, consult a Mercedes-Benz
Service Centre. Opening and closing t
Opening and closing t
he fuse bo
he fuse box in t
x in the fr
he front
ont
passeng
passeng er f
er foo
ootw
twell
ell Obser
vethe no tes on elect rical fuses
(/ page 368). #
T
T o open:
o open: open cover1 inthe direction of the
ar ro w and remo veit. #
T To close:
o close: reinsert co ver1. Opening and closing t Opening and closing t
he fuse bo
he fuse box in t
x in the load com-
he load com-
par
par tment
tment Obser
vethe no tes on elect rical fuses
(/ page 368). #
Remo vecover1.
The fuse assignment diag ram is on the side of the
fuse box. 370
370
Breakd
own assistance

R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R R
eq eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 380).
Plas
Plas tic hub cap
tic hub cap #
T
To r
o r emov
emov e:
e:turn the centre co ver of the hub
cap anti-clockwise and remo vethe hub cap. #
T
To
o /t:
/t: make sure that the centre co ver of the
hub cap is turned anti-clockwise. #
Position the hub cap and turn the centre co ver
clockwise until the hub cap engages ph ysically
and audibl y.
Aluminium hub cap
Aluminium hub cap #
T
To r
o r emov
emov e:
e:position centring cap 2from the
tyre-change tool kit on hub cap 1. #
Position wheel spanner 3on cent recap 2. #
Using wheel spanner 3, turn hub cap1
anti-clockwise and remo veit. #
T
To
o /t:
/t: follow the inst ructions abo veinreve rse
order.
% Speci/ed
Speci/ed tight
tightening t
ening t orq
orque:ue: 27 Nm. R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R
R
eq
eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 380).
R The wheel trims and hub caps ha vebeen
re mo ved (/ page 381).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel is being
changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load-bearing, non-slip underla y.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Wheels and tyres
381
381