Page 402 of 533

R
A maximum of 55% (antifreeze pr otection
down to-45°C) N
No
ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 391). &
W
WARNING
ARNING ‑ Risk of /re and injury due to
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. It could ignite if it comes into contact
with hot engine component parts or the
ex haust system. #
Make sure that no windscreen washer
concent rate spills out next tothe /ller
opening. *
N
NO OTE TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. V
V
ehicle data
ehicle data Inf
Inf
or
ormation r
mation r eg
egar
arding t
ding t he v
he vehicle data
ehicle data The
vehicle data speci/ed may vary as a result of
th efo llowing factors:
Fa ctors:
R tyres
R load
R condition of the suspension
R optional equipment
In addition, thefo llowing applies tothe speci/ed
ve hicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 389). V
V
ehicle dimensions
ehicle dimensions N
No
ot f
t f or plug-in h
or plug-in h ybr
ybrid:
id: Te
ch nical data
399
399
Page 417 of 533
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
:
Automatic driving lights
inoperative *T
he light sensor for automatic driving lights is malfunctioning. #
Consult a quali/ed specialist workshop.
:
Active Light System inoper-
ative *T
he active headlamps are malfunctioning. #
Consult a quali/ed specialist workshop.
:
Switch on headlamps *Y
ou are driving without lo w-beam headlamps. #
Turn the light switch totheL orà position.
:
Switch off lights *Y
ou are leaving theve hicle and the lights are still switched on. #
Turn the light switch totheà position. 414 414
Display messages and
warning/indicator lamps
Page 456 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
¸
Ã
ç
Ä
temporarily unavailable
Sensors dirty *F
ront and corner radar sensors (hereaTer "sensors") are malfunctioning. Possible causes:
R The senso rsare dirty
R Heavy rain or snow
R Extended country driving without other tra1c, e.g. in the desert
Driving systems and driving saf ety sy stems ma y be malfunctioning or temp orarily una vailable. The brake system, steer-
ing and drive system will continue tofunction normall y. #
Drive on carefull y.
Once the causes of the problem are no longer present, the driving systems and driving saf ety sy stems will be available
again and the cor responding symbols will be switched o..
If th e display message does not disappear: #
Stop theve hicle in accordance with the tra1c conditions. #
Clean all sensor co vers from outside (/ page 209). #
Restart theve hicle. Displ
aymessages and warning/indicator lamps
453 453
Page 469 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Ý
Please wait 48 V battery
charging *T
he 48 V battery is dischar ged. You ha veswitched on theve hicle while the 12 V battery was being charge d with a
suitable charge r or while ano ther vehicle was pr oviding starting assistance.
The dischar ged 48 V battery is charge d automatically via thevo ltage con verter. ATer a fewminutes, theMotor can be
started again display message will be shown on the inst rument displa y. #
Start theve hicle. #
Drive theve hicle for a while tocharge the 12 V battery and the 48 V battery aTer disconnecting thech arge r from
th eve hicle.
If th eMotor can be started again display message does not appear aTer a fewminutes: #
Tryto start theve hicle. #
Ifth eve hicle does not start, consult a quali/ed specialist workshop.
Motor can be started again *The 48 V battery has been charge d automatically via thevo ltage con verter. #
Start theve hicle and drive for a while tocharge the 12 V battery and the 48 V batter y. T T
yr
yr e pr
e pr essur
essur e monit
e monit or
or Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences andM
MSolutions
Solutions
Tyre press. monitor cur-
rently unavailable *T
here is inter fere nce from a po werful radio signal source. As a result, no signals from the tyre pressure sensors are
being received. The tyre pressure monitoring system is temp orarily una vailable.
The tyre pressure monitoring system will restart au tomatically as soon as the cause has been recti/ed. 466 466
Display messages and
warning/indicator lamps
Page 470 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Drive on.
Tyre press. monitor inoper-
ative *T
he tyre pressure moni toring system is malfunctioning. &
W WARNI NG
ARNI NGThere is a risk of an accident if the tyre pressure monitoring system is malfunctioning
The tyre pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tyres.
Ty res with insu1cient tyre pressure may impair the driving characteristics as well as steering and braking. #
Have the tyre pressure monitoring system checked at a quali/ed specialist workshop. Tyre press. monitor inoper-
ative No wheel sensors
*T
he wheels /tted do not ha vesuitable tyre pressure senso rs. The tyre pressure monitoring system is deactivated. #
Fit wheels with suitable tyre pressure sensors.
h
Wheel sensor(s) missing *T
here is no signal from the tyre pressure sensor of one or more wheels. No pressure value is displa yedfo rth e a.ected
tyre. #
Have thefa ulty tyre pressure sensor replaced at a quali/ed specialist workshop.
h
Check tyre(s) *T
he tyre pressure in one or more tyres has dropped signi/cantl y.
The wheel position is displa yed. A warning tone also sounds. Display messa
ges and warning/indicator lamps
467 467
Page 475 of 533

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
5
Engine oil pressure Stop
Switch off engine *T
he oil pressure is too lo w.
* N NO
OTE
TE Engine damage caused bydriving with insu1cient oil pressure #
Avoid driving with insu1cient oil pressure. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Switch o. theve hicle. #
Consult a quali/ed specialist workshop.
5
Engine oil level cannot be
measured *T
he elect rical connection tothe oil le vel sensor has been inter rupted or the oil le vel sensor is faulty. #
Consult a quali/ed speciali stwo rkshop. W W
ar
ar ning and indicat
ning and indicat or lam
or lamps
ps Ov
Ov
er
ervie
vie w of indicat
w of indicat or and w
or and war
arning lam
ning lam ps
ps Some systems will per
form a self-test when the
ve hicle is switched on. Some indicator and warn-
ing lamps may brie0y light up or 0ash. This beha v-
iour is non-critical. These indicator and warning lamps indicate a malfunction only if
they light up
or 0as haTer theve hicle has been star ted or dur-
ing a journe y. 472
472
Display message
s andwarning/indicator lamps
Page 482 of 533

Engine
Engine
W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant warning lamp (red) *T
he red coolant warning lamp is lit while the engine is running.
Po ssible causes:
R The temp erature sensor is malfunctioning
R The coolant le vel is too low
R The air supply tothera diator is obstructed
R The radiator fan is faulty
R The engine coolant pump is faulty
If th ere is an additional warning tone, the coolant temp erature has exceeded 120°C. &
W
WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. Do not continue driving. Displ
aymessages and warning/indicator lamps
479
479
Page 483 of 533

W
W
ar
ar ning/indicat
ning/indicat or lampP
or lam pP ossible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Notethe messages on the instrument displa y.
If t
If t he coolant t
he coolant t em
emper
per atur
atur e displa
e displa y is at t
y is at the low
he lower end of t
er end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Consult a quali/ed specialist workshop.
If t
If t he coolant t
he coolant t em
emper
per atur
atur e displa
e displa y is at t
y is at the upper end of t
he upper end of t he t
he tem
emper
per atur
atur e scale:
e scale: #
Exit theve hicle and keep a safe distance from it until the engine has cooled down. #
Check the coolant le vel (/ page 342). #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ
Coolant warning lamp (yel-
low) *T
he yellow coolant warning lamp is lit while the engine is running.
Po ssible causes:
R The temp erature sensor is malfunctioning
R The charge air, transmission oil or battery cooling is faulty
R The radiator shutters are bloc ked or defective #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. 480
480
Displ
aymessages and warning/indicator lamps