2021 MERCEDES-BENZ A-CLASS HATCHBACK ECU

EC
EC
O displa
O displa y function
y function The ECO display summarises
your driving charac-
te ristics from the start of the journey toits com-
pletion and assists you in achieving the most eco-
nomical driving style.
Yo u can in0uence consum ption bydoing thefo l-
lowing:
R driving with particular care.
R V Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: driving
in drive prog ram ;.
R V
V ehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: driving in
drive prog ram A.
R following thege arshiT recommendations. The lettering in
the segment will light up brightl y,
th e outer edge will light up and the segment will
/ll up when thefo llowing driving style is adop ted:
R 1 Steady speed
R 2 Gentle deceleration and rolling
R 3 Moderate acceleration
The lettering in the segment will be grey ,th e outer
edge will be dark and the segment will em pty
when thefo llowing driving style is adop ted:
R 1 Fluctuations in speed
R 2 Heavy braking
R 3 Sporty acceleration
The ECO display will show you when you ha ve
driven economicall y:
R The thre e segments will /ll up comple tely at
th e same time
R The edges around all thre e segments will light
up
The additional range achie ved as a result of your
driving style in comparison with a driver with a
ve ry sporty driving st yle will be shown in thecent
reof display 4. Therange displa yed does
not indicate a /xed reduction in consum ption. R R
eg
eg ener
ener ativ
ative br
e br ak
ake syst
e syst em (plug-in h
em (plug-in h ybr
ybrid)
id) F F
unction of t unction of t he r
he recuper
ecuper ativ
ative br
e br ak
ake syst
e syst em
em
Depending on the selected recuperation le vel,the
electric mo tor is operated as an alternator when
in ove rrun mode and during braking in order to
ch arge the high-voltage battery while driving. As
soon as youre lease the accelerator pedal when
th eve hicle is in motion, recuperation in overrun
mode is initiated.
The higher there cuperation, the more sharply the
ve hicle is braked when coasting and the more
electrical energy is fed into the high-voltage bat-
te ry.
The rege nerative brake system has thefo llowing
ch aracteristics:
R supports braking with elect ronically cont rolled
brake force boosting
R con verts th e kinetic energy of theve hicle into
elect ric energy 174 174
Driving and parking

%
Ifyo u brake hard, the mechanical brake is
also used. This means that the maximum
re cuperative energy cannot be reco vered. The
more you drive and brake in an anticipatory
manner, the more e1cient lyenergy can be
re cuperated.
Syst
Syst em limits
em limits
The braking e.ect of the electric mo tor during
re cuperation in overrun mode may be reduced or
may not be available at all in thefo llowing situa-
tions:
R when the high-voltage battery charge level
increases
R ifth e high-voltage battery is not yet at a nor-
mal operating temp erature
R when driving at speeds close tozero
R in transmission position i
R during and aTer ESP ®
inter venes
In these cases, the desired deceleration is set by
th e brake control system. Also brake with the
service brake if necessar y. Manuall
Manuall
y se
y setting r
tting r ecuper
ecuper ativ
ative deceler
e deceler ation
ation
% IntheÎ drive prog ram, you can use the
stee ring wheel gearshiT paddles tomanually
adjust the intensity of recuperation in overrun
mode. %
When theve hicle is star ted again or transmis-
sion position his engaged again, the stand-
ard setting is automatically set.
The following recuperation le vels are available:
R hà Intelligent, anticipa tory recuperation
with ECO Assist (standard setting)
(/ page 176)
R hq Norecuperation: theve hicle rolls freely R
h Normal recuperation
R h± Increased recuperation; st rong deceler-
ation in overrun mode, e.g. for driving on
downhill gradients
R h±± Maximum recuperation: maximum
decele ration in overrun mode #
T
To incr
o incr ease r
ease r ecuper
ecuper ation:
ation:brie0y pull gearshiT
paddle 1. #
T
To r
o r educe r
educe r ecuper
ecuperation:
ation:brie0y pull gearshiT
paddle 2. #
S
St
tandar
andar d se
d setting:
tting: pull and hold gearshiT pad-
dle 1 or2 or engage transmission position
h again. Driving and parking
175
175

The Instrument Display sh
ows cur rently set recu-
peration le vel1, forex ample, hÃ. Eco Assis
Eco Assis
t function (plug-in h
t function (plug-in h ybr
ybr id)
id) %
The following function is countr y-dependent
and available only in conjunction with an inte-
gr ated hard drive navigation system.
ECO Assist is active only in drive prog rams A,
Î, Ïand;, and only in transmission
positions horhÃ. Perm anent manual gear-
shiTing pmust be switched o. (/ page 185).
ECO Assist anal yses data forth eve hicle's expec-
te dro ute. This allo ws the system tooptimally
adjust the driving style forth ero ute ahead, sa ve
fuel and recuperate.
ECO Assist is displa yed on theAssistance
menu(/ page 279). 1
Event ahead, e.g. roundabout
2 Distance display forth eev ent ahead
3 "Foot o. the accelerator" prom pt Displa
yable pr evious events 1 The
following events 1can be de tected and dis-
pla yedfo rth ero ute section ahead:
R Vehicle in front
R Speed limit
R Downhill and uphill gradients
R Junctions and roundabouts
R Bends
The segments of dis tance display 2show the
distance totheeve nt ahead as follo ws:
R Afew segments light up: theeve nt ahead is
near.
R Many segments light up: theev ent ahead is
fur ther awa y.
If ECO Assist is acti ve,th e "Foot o. the accelera-
to r" symbol 3will appear on the inst rument dis-
play and on the head-up display beside the trans-
mission position displa y.
When theve hicle nears an event, ECO Assist will
calculate the optimal speed for minimal energy
consum ption based on the distance, speed and
gr adient. The "Foot o. the accelerator" symbol 3
will appear on the inst rument displa y. 176
176
Driving and parking

If
yo uta ke your foot o. the accelerator pedal in
good time, there maining segments on the display
will successively turn green until theeve nt sh own
is reached. The driv etra in will be set for minimal
energy consum ption. The vehicle will recuperate
autonomously and thus charge the batter y.
% You can also manually increase or reduce the
re cuperation in drive prog ram Î. Ho wever,
ECO Assist is available only in thehÃ
setting (/ page 175).
If th ere is no response tothe "Foot o. the accel-
erator" prom pt3 ,th e segments will remain
white.
The event will be shown for a short time aTer it
has been passed.
If th eev ent in volves a vehicle in front, the symbol
will be shown in green as soon as there is a
re sponse to"Foot o. the accelerator" prom pt3 .
If th e system does not inter vene during theev ent
ahead, no thing will be displa yed. The system will
be passive. Syst
Syst em limits em limits
ECO Assist can function even more precisely if
th ero ute is adhered towhen route guidance is
active. The basic function is also available without
active route guidance. Not all information and
tra1c situations can be fore seen. The quality
depends on the map data.
ECO Assist is only an aid. The driver is responsible
fo rke eping a safe distance from theve hicle in
front, forve hicle speed and for braking in good
time. The driver must be ready tobrake at all
times ir respecti veof whe ther the system inter-
ve nes.
The system may be impai red or may not function
in thefo llowing situations:
R If visibility is poor, e.g. due toinsu1cient illu-
mination of thero ad, highly variable shade
conditions, rain, sno w,fog or heavy spr ay.
R Ifth ere is glare, e.g. from oncoming tra1c,
direct sunlight or re0ections.
R Ifth ere is dirt on the windscreen in the area of
th e multifunction camera or the camera is
misted up, damaged or obscured. R
Ifro ad signs are hard todetect, e.g. due to
dirt, snow or insu1cient lighting, or because
th ey are obscured.
R Ifth e information on the navigation system's
digital map is incor rect, insu1cient or out of
date.
R If signs are ambiguous, e.g. road signs in road-
wo rks or in adjacent lanes. F F
unction of t
unction of t he r
he rout
oute-based oper
e-based oper ating-mode s
ating-mode strtrat-
at-
egy (plug-in h
egy (plug-in h ybr
ybrid)
id) %
The following function is countr y-dependent
and available only in conjunction with an inte-
gr ated navigation system.
The route-based operating-mode strategy is active
only in drive prog rams A and;. When
ro ute guidance is active, data on the planned
ro ute is anal ysed. This function can be activated
and deactivated in the multimedia system
(/ page 298).
If th e function is active, data on the fur ther course
of thero ute is evaluated. This includes, e.g. road
type, speed limi tations and altitude data. Driving and parking
177
177

The
hybrid system then adapts the operating
strategy tothe fur ther course of thero ute:
R Use of electrical energy and the combustion
engine are adap ted.
R State of charge ofthe high-voltage battery is
controlled accordingl y.
R Electrical energy is reser ved especially for
electric mode, e.g. urban route sections.
R The vehicle automatically selects the operat-
ing mode.
When thero ute-based operating-mode strategy is
activated, the energy 0ow display sho ws the sta-
tus of the function as – active or passive
(/ page 299).
The route-based operating-mode strategy is
switched topassive under thefo llowing condi-
tions:
R You are driving in a drive prog ram other than
A or;.
R Route guidance is active.
R High-voltage battery's state of charge istoo
lo w. D
D
YN
YNAMIC SELECT switch AMIC SELECT switch F
F
unction of t
unction of t he D
he DYN
YNAMIC SELECT switchAMIC SELECT switch *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. %
Depending on the engine and equipment, the
ve hicle has di.erent drive prog rams.
Use theDY NAMIC SELECT switch tochange
between thefo llowing drive prog rams.
The drive prog ram selected appears in the instru-
ment displa y.
= Individual
R Individual settings
C Sport
R Continues too.er stability but with a sporty
setup
R Allo ws th e sporty driver a more active driving
style R
Driving with the combustion engine and rein-
fo rc ed boost e.ect (plug-in hybrid)
R Deactivation of the combustion engine when
stationary (plug-in hybrid)
R Only suitable for good road conditions, a dry
ro ad sur face and a clear st retch of road
A Comfort
R Comfor table and economical driving
R Balance between traction and stability
R The selection of the matching drive type by
th ehy brid system depends on the driving con-
ditions and the distance (plug-in hybrid)
R Recommended for all road conditions
Î Electric (plug-inhybrid)
R Electric mode – driving without the combus-
tion engine is possible up toappr ox.
140 km/h
R Adjustable recuperation in overrun mode
R Adaptation of Active Distance Assist
DISTRONIC for electric mode 178
178
Driving and parking

Use
the DIRECT SELECT le verto switch the trans-
mission position. The cur rent transmission posi-
tion is displa yed in the inst rument displa y. j
Park position
k Reversege ar
i Neutral
h Drive position Eng
Eng
aging rev
aging rever
erse g
se g ear R
ear R #
Depress the brake pedal and push the DIRECT
SELECT le ver upwards past the /r stpoint of
re sis tance.
Eng
Eng aging neutr
aging neutr al N
al N #
Dep ress the brake pedal and push the DIRECT
SELECT le ver up or down tothe /rst point of
re sis tance.
% ToshiT into neutral iwith theve hicle
switched on, push the selector le ver up or
down for se veral seconds tothe /rst point of
re sis tance.
Subsequently releasing the brake pedal will allow
yo uto mo vetheve hicle freel y,e.g. topush it or
to w it away.
Pr
Pr oceed as f
oceed as f ollow
ollow s if y
s if you w
ou w ant t
ant the aut
he aut omatic
omatic
tr
tr ansmission t
ansmission t o r
o remain in neutr
emain in neutr al
ali
i ev
even if t
en if t he
he
v
v ehicle is switc
ehicle is switc hed
hedo.
o.or t
or t he dr
he dr iv
iver's door is
er's door is
opened:
opened: #
Depress the brake pedal and engage neutral
i when the car is stationar y. #
Release the brake pedal. #
Switch o. theve hicle. %
Ifyo uth en exitth eve hicle leaving theke y in
th eve hicle, the automatic transmission
re mains in neut rali.
Eng
Eng aging par
aging par k position P
k position P #
Obser vethe no tes on parking theve hicle
(/ page 211). #
Depress the brake pedal until theve hicle
comes toa standstill. #
When theve hicle is at a standstill, press but-
to nj.
When the transmission position display sho ws
j ,th e park position is engaged. If no trans-
mission position display jappears, secure
th eve hicle toprev ent it from rolling away.
% Depending on the situation, it may take a
short time until jis engaged. Therefore,
alw ays pay attention tothe transmission posi-
tion displa y.
Pa rk position jis engaged automatically if one
of thefo llowing conditions is met:
R You switch the stationary vehicle o. in trans-
mission position hork. 184
184
Driving and parking

%
When using a CCS (Combined Charging Sys-
te m) charging cable tocharge with direct cur-
re nt at a combo vehicle soc ket, bo thvehicle
soc ket connections 1and 2are used for
ch arging.
Charging options forth e high-voltage battery
(mode 2, 3 or 4):
R Charging through recuperation while theve hi-
cle is in motion
R Charging with alternating cur rent when sta-
tiona ry:
- at a mains soc ket (mode 2)
- at a wallbox or charging station (mode 3)
R Charging with direct cur rent when stationary
(vehicles with combo vehicle soc kets):
- at a fast charging station (mode 4)
Depending on the count ry-speci/c vehicle equip-
ment and your vehicle's charging cable, single
phase ACcharging is also possible.
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requiremen ts.Consult a
quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to
th e impr ovedch arging per form ance and better
ch arging e1ciency o.ered.
S
S t
to
o wing t
wing t he c
he char
harging cable
ging cable
Alw ays st owtheve hicle charging cable in the
ch arging cable bag pr ovided and secure it in the
boot or load compartment of your vehicle.
Otherwise, thech arging cable is not su1ciently
secured.
Syst Syst em limits
em limits
The po wer output of the high-voltage battery may
be impaired bythefo llowing:
R High or low outside temp eratures
R Electrical auxiliary consumers in theve hicle
being switched on, e.g. operating the air con-
ditioning system
R Extended periods without charging The
charging time of the high-voltage battery may
be increased bythefo llowing:
R High or low outside tempe ratures
R Extended periods without charging
R The maximum available charge cur rent of the
ch arging facility
R The charging cur rent set (mode 2) in the multi-
media system (/ page 298) N
No
ot
tes on c
es on c har
harging t
ging t he high-v
he high-v olt
oltag
age batt
e batt er
ery at t
y at t he
he
mains soc ke
mains soc ket (mode 2)
t (mode 2) &
D
DAN
AN GER
GER Risk of fatal injury from incor-
re ctly ins talled component parts
Connecting thech arging cable toa mains
soc ket using incor rectly ins talled component
parts could cause a /re or an electric shoc k,
fo rex ample. #
Only connect thech arging cable to a
mains soc ketth at:
R Has been proper lyinstalled and 196
196
Driving and parking

#
Press charging inter ruption button 2.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked.
% Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop. #
Close the soc ket co ver and the soc ket 0ap.
% ATer thech arging cable connector has been
disconnected, the leT % indicator lamp 1
on theve hicle soc ketre mains lit for some
time before switching o.. F
F
unction of t
unction of t he c
he charg
harg e lev
e lev el displa
el displa y in t
y in the Ins
he Instr tru-
u-
ment Display
ment Display 1
Current charge level
2 Time at which comple tely ch arged
3 Predicted charge leve l at pre-selected depar-
ture time
4 Current charging capacity
When theve hicle is connected tothe mains sup-
ply and is switched o., the Instrument Display
sho ws th ech arge leve l display for appr oximately
two minutes.
The value for cur rent charging capacity 4may
di.er from the display on thech arging station. Ata
ch arging capacity of 10 kW or highe r,th eva lue
in thech arge leve l display is rounded o. and
shown without a decimal place.
% The value in item 3varies depending on the
setting of thech arging process. It displ aysthe
ch arging prediction, e.g. the time at which the
selected charge leve l will be reached or the
ch arge leve l at the pre-selected departure
time. P P
ar
ar king
king P
P
ar
ar king t
king t he v
he vehicle
ehicle &
W
WARNING
ARNING Risk of accident and injury
caused byan insu1ciently secured vehi-
cle rolling away
If th eve hicle is not securely par ked su1-
cient ly,it can rollawa y in an uncontrolled way
eve n at a slight downhill gradient. #
On uphill or downhill gradients, turn the
front wheels so that theve hicle rolls
to wa rdsth eke rb if it starts moving. Driving and parking
211
211