2021 MERCEDES-BENZ A-CLASS HATCHBACK warning light

1
Clothes hook
The clo thes hooks are not suitable for hanging
heavy objects as this can cause theta ilgate to
lo we r automaticall y.Use the clo thes hooks only
fo r light objects such as jac kets. A
A
tt
tt ac
ac hing a r
hing a r oof lugg
oof lugg ag
age r
e r ack
ack &
W
WARNING
ARNING Risk of accident due toexceed-
ing the maximum roof load
The vehicle cent reofgrav ity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If yo uex ceed the maximum roof load, the driv-
ing characteristics, as well as steering and
braking, will be greatly impaired. #
Neverex ceed the maximum roof load
and adjust your driving style. Yo
u will /nd information on the maximum roof
load in the "Technical data" section.
* N
NO OTE
TE Damage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. #
Obser vethe signposted headroom clear-
ance. #
Ifth eve hicle height is greater than the
permitted headroom clearance, do not
enter. #
Obser vethech anged vehicle height with
add-on roof equipment. *
N NOOTE
TE Vehicle damage from non-appr oved
ro of luggage racks The
vehicle could be damaged byroof luggage
ra ck sth at ha venot been tested and appro ved
fo r Mercedes-Benz. #
Use only roof luggage rack ste sted and
appro vedfo r Mercedes-Benz. #
Depending on theve hicle equipment,
ensu rethat the sliding sunroof can be
fully raised when thero of luggage rack is
/t ted. #
Depending on theve hicle equipment,
ensu rethat theta ilgate can be fully Seats and st
owing
127
127

#
Open soc ket 0ap 3. #
Inse rtthe plug of the device into 115 V soc ket
1 .
When the on-board electrical system voltage is
su1cient, indicator lamp 2lights up. USB por
USB por
t in t
t in the r
he rear passeng
ear passeng er com
er compar
partment
tment %
Depending on theve hicle equipment, the
design of the st owage compartment and the
number of USB ports in there ar cent recon-
sole may vary.
When theve hicle is switched on, you can charge a
USB device, such as a mobile phone, at USB ports
using a suitable charging cable. W W
ir
ireless c
eless c har
harging of t
ging of t he mobile phone and con-
he mobile phone and con-
nection wit
nection wit h t
h the e
he e xt
xter
er ior aer
ior aer ial
ial N
No
ot
tes on wir
es on wir elessl
elessly c
y char
har ging t
ging t he mobile phone
he mobile phone &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within. There is a
risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cann ot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe no tes on loading theve hicle. &
W
WARNING
ARNING Risk of /re from placing objects
in the mobile phone st owage compart-
ment
Placing other objects in the mobile phone
st ow age compartment could constitute a /re
hazard. 130
130
Seats and st
owing

If
th e battery is insu1cient lych arge d, the stand-
ing lights or parking lights will be switched o.
automatically tofacilitate the next engine start.
The exterior lighting (e xcept standing and parking
lights) will switch o. automatically when the driv-
er's door is opened.
R Obser vethe no tes on sur round lighting
(/ page 142).
A
A ut
ut omatic dr
omatic dr iving lights function
iving lights function
When theve hicle is switched on, the standing
lights, low beam and daytime running lights are
switched on automatically depending on the light
conditions. &
W
WARNING
ARNING Risk of accident when the
dipped beam is switched o. in poor visi-
bility
When the light switch is set toà ,the
dipped beam may not be switched on auto-
matically if there is fog, snow or other causes
of poor visibility such as spr ay.#
In such cases, turn the light switch to
L . The automatic driving lights are only an aid.
Yo u
are responsible forve hicle lighting.
Switc Switc hing t
hing t he r
he rear f
ear f og lights on or
og lights on or o.
o.
R
R eq
eq uir
uir ements:
ements:
R The light switch is in theL orà posi-
tion. #
Press the R button.
Please obser vethe count ry-speci/c la wsonthe
use of rear fog lamps.
R
R egulating headlam
egulating headlam p r
p rang
ang e (halog
e (halog en headlam
en headlam ps)
ps)
The headla mprange adjuster all owsyo uto adjust
th e cone of light from the headlamps in relation to
th eve hicle's load condition. g
Driver's seat and front passen ger seat occu-
pied
1 Driver's seat, front passenger seat and rear
seats occupied
2 Driver's seat, front passen ger seat and rear
seats occupied, load compartment laden
3 Driver's seat and front passen ger seat occu-
pied and maximum permissible rear axle load
utilised Light and sight
135
135

A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating t
ating the hazar
he hazar d w
d war
arning lights
ning lights #
Press button 1.
The hazard warning lights will switch on automati-
cally if:
R the airbag has been deplo yed.
R theve hicle is heavily braked from a speed of
more than 70 km/h toa standstill. When
you pull away again, the hazard warning
light system will switch o. automatically at
appr oximately 10 km/h. You can also switch o.
th e hazard warning light system using button 1. A A
dap
dap tiv
tive functions, MUL
e functions, MUL TIBEAM LED
TIBEAM LED Int Int
ellig ellig ent Light Syst
ent Light Syst em function
em function
The MULTIBEAM LED headlamp s adapttothe
driving and weather situation and pr ovide exten-
ded functions for impr oved illumination of the
ro ad.
The system comprises thefo llowing functions:
R Active headlamps (/ page 137)
R Cornering light (/ page 138)
R Motorw ay mode (/ page 138)
R City lighting (/ page 138)
Syst
Syst em limits
em limits
R The system is active only when it is dar k.A
A
ctiv
ctiv e headlam
e headlamps function ps function R
The headlamps follow the steering mo ve-
ments.
R Releva nt areas are better illumina ted during a
journe y.
The functions are active when the high beam is
switched on. Light and sight
137
137

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. 140 140
Light and sight

A
A
djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness.
A
A ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness. #
Select Brightness zones. #
Switch the function on or o..
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting #
Select Colour. #
Select Multi-colour. #
Select a colour combination.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation #
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals. A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run.
A
A ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. Changing bulbs (onl
Changing bulbs (onl
y f
y for v
or v ehicles wit
ehicles wit h halog
h halogen
en
headlam
headlam ps)
ps) N
No
ot
tes on c
es on c hanging bulbs
hanging bulbs &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your-
self on these component parts. #
Allow the component parts tocool down
before replacing the bulb. R
Do not use a bulb if it has been dropped or if
its glass has been scratched. The bulb may
otherwise explode.
R Do not touch the glass bulb with your bare
hands.
R Protect bulbs from moisture and do not allow
bulbs tocome into contact with liquids. Light and sight
143 143

4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wiping with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 337). Switc
Switc
hing t
hing t he r
he rear windo
ear windo w wiper
w wiperon/o.
on/o. 1
ô Single wipe/ washing
2 è Intermittent wiping #
Single wipe:
Single wipe: press button 1tothe point of
re sis tance. #
W
W iping wit
iping wit h w
h washer
asher 0uid:
0uid:press button 1
be yond the point of resis tance. #
Switc
Switc hing int
hing int er
ermitt
mitt ent wiping
ent wiping on/o.:
on/o.:press
button 2.
The è symbol will appear on the inst ru-
ment cluster when there ar wind owwiper is
switched on. R R
eplacing t eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. 146
146
Light and sight

#
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch (/ page 145).
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Maint
Maint enance display
enance display #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades. %
The duration until the colour changes varies
depending on the usage conditions. R
R
eplacing t
eplacing t he r
he rear windo
ear windo w wiper blade
w wiper blade &
W
WARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. R R
emo emo ving t
ving t he wiper blade
he wiper blade #
Switch theve hicle o.. 148
148
Light and sight