2021 MAZDA MODEL CX-30 Rear

3. After your vehicle begins entering the parking space, continue backing up slowlyso that the distance between the vehicle width lines and the sides of the parking
space on the left and right are roughly equal.
1. (Display condition)
2. (Vehicle condition)
4. Continue to adjust the steering wheel until the vehicle width guide lines are parallel to the left and right sides of the parking space.
When Driving
Rear View Monitor
4-227
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

5. Once they are parallel, straighten the wheels and back your vehicle slowly intothe parking space. Continue checking the vehicle's surroundings and then stop
the vehicle in the best possible position. (If the parking space has division lines,
check whether the vehicle width guide lines are parallel to them.)
1. (Display condition)
2. (Vehicle condition)
6. When the shift lever (manual transmission) or the selector lever (automatic transmission) is shifted from reverse (R) position to another shift lever (manual
transmission) or the select or lever (automatic transmission) position, the screen
returns to the previous display.
When Driving
Rear View Monitor
4-228
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

NOTE
Because there may be a difference between the displayed image, such as indicated
below, and the actual conditions when parking , always verify the safety at the rear of
the vehicle and the surrounding area directly with your eyes.
In the image of the parking space (or garage) displayed on the screen, the back
end and distance guide lines may appear aligned in the monitor, but they may not
actually be aligned on the ground.
When parking in a space with a division li ne on only one side of the parking space,
the division line and the vehicle width guide line appear aligned in the monitor,
but they may not actually be aligned on the ground.
▼Variance Between Actual Road Conditions and Displayed Image
Some variance occurs between the actual road and the displayed road. Such
variance in distance perspective could lead to an accident. Note the following
conditions that may cause a variance in distance perspective.
When the vehicle is tilted due to the weight of passengers and load
When the vehicle rear is lowered, the object displayed on the screen appears farther
than the actual distance.
1. Object
2. Variance
3. Object on screen
When Driving
Rear View Monitor
4-229
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09

When there is a steep grade behind the vehicle
When there is a steep upgrade (downgrade) behind the vehicle, the object displayed
on the screen appears farther (downgra de: closer) than the actual distance.
1. Appears farther than actual distance
2. Appears closer than actual distance
3. Distance between the vehicle and object displayed on the screen.
4. Actual distance between the vehicle and object.
5. Object at actual position
6. Object on screen
Three-dimensional object on vehicle rear
Because the distance guide lines are displayed based on a
flat surface, the distance
to the three-dimensional object displayed on the screen is different from the actual
distance.
1. (Screen display)
2. (Actual condition)
3. Sensed distance on screen A>B>C
4. Actual distance B>C=A
When Driving
Rear View Monitor
4-230
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

(Predicted vehicle path assist lines display type)
When reversing near a three-dimensional object
When reversing near an overhanging object, the vehicle may hit the object even if
the anticipated course line does not contact the object on the screen. The position
of the object displayed on the screen is different from the actual position because
the anticipated course lines on the screen are displayed based on a horizontal road
surface. When backing up near an overhanging object, confirm the rear and
surrounding conditions directly with your eyes.
1. (Screen display)
2. (Actual view)
When Driving
Rear View Monitor
4-231
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

Parking Sensor System*
▼Pa r k i n g S e n s o r Sys t e m
The parking sensors use ultrasonic sensor
s which detect obstructions around the
vehicle when the vehicle is driven at low speeds, such as during garage or parallel
parking , and a buzzer sound and detection indicator notify the driver of the
approximate distance from the vehicle to the surrounding obstruction.

1. Front ultrasonic sensor*
2. Front corner ultrasonic sensor*
3. Rear ultrasonic sensor
4. Rear corner ultrasonic sensor
5. Rear side ultrasonic sensor
*
WARNING
Do not rely completely on the parking se nsor system and be sure to confirm the
safety around your vehicl e visually when driving:
This system can assist the driver in operating the vehicle in the forward and
backward directions while parking. The detection ranges of the sensors are limited,
therefore, driving the vehicle while relying only on the system may cause an
accident. Always confirm the safety around your vehicle visually when driving.
CAUTION
 Do not install any accessories within the detection ranges of the sensors. It may
affect the system operation.
 Depending on the type of obstructio n and the surrounding conditions, the
detection range of a sensor may narrow, or the sensors may not be able to detect
obstructions.
When Driving
Pa r k i n g S e n s o r Sys te m
4-232*Some models.
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

The system may have a malfunction if a message indicating a system malfunction is
displayed. Have your vehicle inspected by an Authorized Mazda Dealer.
A message may be displayed even when the ambient temperature is extremely
cold, or mud, ice, or snow adheres to the sensor area. Remove any foreign matter
from the sensor area.
▼Sensor Detection Range
The sensors detect obstructions within the following range.

1. Front ultrasonic sensor detection range
2. Rear corner/Rear side ultrasonic sensor detection range
3. Rear ultrasonic sensor detection range
4. Front corner ultrasonic sensor detection range
A: About 55.0 cm (About 21.6 in)
B: About 150 cm (About 59.0 in)
C: About 100 cm (About 39.3 in)

Viewing distance display
Display
Distance between vehicle and obstruction
Without 360° view monitor With 360° view moni-
tor Front ultrasonic sensor
*/
Front corner ultrasonic
sensor
*
Rear ultrasonic sensor/Rear corner ultrasonic
sensor/Rear side ultra-
sonic sensor
*
Green
Front ultrasonic sensor:Approx. 100― 60.0 cm
(39.3― 23.6 in) Rear ultrasonic sensor:
Approx. 150― 60.0 cm
(59.0 ―23.6 in)
When Driving
Pa r k i n g S e n s o r Sys te m
4-234*Some models.
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09

DisplayDistance between vehicle and obstruction
Without 360° view monitor With 360° view moni-
tor Front ultrasonic sensor
*/
Front corner ultrasonic
sensor
*
Rear ultrasonic sensor/Rear corner ultrasonic
sensor/Rear side ultra-
sonic sensor
*
Yellow
Front ultrasonic sensor:
Approx. 60.0 ―45.0 cm
(23.6 ―17.7 in)
Front corner ultrasonic sensor:
Approx. 55.0 ―38.0 cm
(21.6 ―14.9 in) Rear ultrasonic sensor:
Approx. 60.0 ―45.0 cm
(23.6― 17.7 in)
Rear corner ultrasonic
sensor/Rear side ultra- sonic sensor:
Approx. 55.0 ―38.0 cm
(21.6― 14.9 in)
Amber
Front ultrasonic sensor:
Approx. 45.0 ―35.0 cm
(17.7 ―13.7 in)
Front corner ultrasonic sensor:
Approx. 38.0 ―25 cm
(14.9― 9.8 in) Rear ultrasonic sensor:
Approx. 45.0 ―35.0 cm
(17.7― 13.7 in)
Rear corner ultrasonic
sensor/Rear side ultra- sonic sensor:
Approx. 38.0 ―25 cm
(14.9― 9.8 in)
Red
Front ultrasonic sensor:
Within approx. 35.0 cm (13.7 in)
Front corner ultrasonic sensor:
Within approx. 25 cm (9.8 in) Rear ultrasonic sensor:
Within approx. 35.0 cm (13.7 in)
Rear corner ultrasonic
sensor/Rear side ultra- sonic sensor:
Within approx. 25 cm (9.8 in)
When Driving
Pa r k i n g S e n s o r Sys te m
*Some models.4-235
CX-30_8JP5-EA-20K_Edition1_new 2020-7-22 15:50:09