36
GX460_QG_OM60T24U_(U)
■Turning the high beam on/off manually
● Switching to the high beam
Push the lever away from you.The Automatic High Beam indicator
will turn off and the high beam indica-
tor will turn on.
Pull the lever to its original position to
activate the Automatic High Beam sys-
tem again.
● Switching to the low beam
Press the Automatic High Beam switch.The Automatic High Beam indicator
will turn off.
Press the switch to activate the Auto-
matic High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then re turn it to its original position.
The high beams are on while the lever is pull ed toward you, however, after the lever is
returned to its original position, the low beams remain on for a certain amount of time. After-
wards, the Automatic High Be am will be activated again.
What to do if ...
99
GX460_QG_OM60T24U_(U)
See the OWNER’S MANUAL
Turn signal indicatorVSC OFF indicator
(U.S.A.)
Headlight indicatorMulti-terrain Select
indicator
*1, 2
(Canada)
Tail light indicatorCrawl Control indicator*1, 2
Headlight high beam
indicatorDownhill assist control system
indicator
*2
Automatic High Beam
indicator“2nd STRT” indicator
Fog light indicator*2Low speed four-wheel drive
indicator light
Eco Driving Indicator LightCenter differential lock
indicator
Cruise control indicator*1Intuitive parking assist
indicator
*2
Cruise control “SET”
indicator
*1PCS warning light*4
Dynamic radar cruise control
indicator
*1
Smart access system with
push-button start indicator
*1
LDA indicator*1BSM indicator*2
(Flashes)LDA indicator*1
BSM (Blind Spot Monitor)
outside rear view mirror
indicators
*2
Slip indicatorLow outside temperature
indicator
*1
For further information, refer to the OWNER’S MANUAL.
