2021 KIA SEDONA sensor

SEDONA FEATURES & FUNCTIONS GUIDE10


Blind-Spot Collision
Warning w/ RCCW Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
(Button panel located left of Steering Wheel)
Blind-Spot Collision Warning (BCW) *†6
The BCW system uses radar sensors to help alert the driver in certain situations if it
detects an approaching vehicle in the driver’s blind spot area before changing lanes
To enable BCW system, go to the User Settings > Driver Assistance > Blind-Spot
Collision Warning To turn BCW on, press the BCW button
A
The system will become active when the vehicle is traveling faster than 20 mph and
will alert the driver if another vehicle is detected by the radar sensor
Blind-Spot Collision Warning (BCW)
1st-stage alert: When another vehicle is detected within the BCW system boundary
B, or a
vehicle approaches at a high speed, a yellow indicator will illuminate on the outside rearview
mirrors
C
2nd-stage alert: When the 1st-stage alert is on and the driver activates a turn signal, a flashing
yellow indicator will illuminate on the outside rearview mirrors and the system will sound an alert
REMINDERS:
•The BCW system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles

•If the BCW is turned ON and the ignition is cycled, the BCW system returns to ON
Refer to section 5 in the Owner’s Manual for more information.
Rear Cross-Traffic Collision Warning (RCCW) *†6
If the RCCW system sensors detect approaching vehicles from the rear left or rear right side
of the vehicle D, the system will sound an audible alert, the yellow-flashing indicators on the
outside rearview mirror will illuminate and a message will appear on the LCD screen when
these conditions are met:

• The gear shift is moved into Reverse

• The vehicle is moving slower than 6 mph
To turn the RCCW system on, go to User Settings > Driver Assistance > Rear Cross-Traffic Collision Warning
REMINDERS:

•When vehicle power is cycled, RCCW will remain in the previous state

•When a vehicle is approaching within the sensing range and traveling between 2 5 and 22 mph, the RCCW system will show a warning
Refer to section 5 in the Owner’s Manual for more information. The BCW and RCCW systems are
supplemental systems. Do not
solely rely on these systems and
always pay attention to drive safely.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
A
B
C
D
DRIVER'S PANEL

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER11


Lane Departure
Warning Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
When the LDW sensor does not detect the
lane traveling in, the lane is not illuminated When the LDW sensor detects the

lane traveling in, the lane is illuminated
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
When the LDW sensor detects the vehicle veering outside of the lane traveling in,
the lane the vehicle is crossing will blink (shown in both images at left)
Lane Departure Warning
Lane Departure WarningLane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
(Button panel
located left of
Steering Wheel)
Lane Departure Warning (LDW) *†6
Lane Departure Warning system is designed to detect the lane markers
using a front view camera on the windshield and can warn the driver
when the vehicle starts departing from the lane
With the Engine Start /Stop button in the ON position, press the LDW
button
A to turn the system ON The instrument cluster indicator
will initially illuminate white It will remain white when the vehicle is
traveling slower than 40 mph and the system does not detect the lane
markers When the LDW system detects the lane markers, the LDW
icon will illuminate green
If LDW detects that you are moving outside of your lane, the system
may issue a warning on the LCD screen and an alert may sound
The system will operate under the following conditions:
• The vehicle speed exceeds approximately 40 mph

• The LDW system recognizes the lane the vehicle is traveling in

• The vehicle is between the lane markers
REMINDERS:
• LDW will not issue a warning if the turn signal or hazard signal is activated
• If the LDW system is set on or off and the ignition is cycled, the system returns
to its previous state
Refer to section 5 in the Owner’s Manual for more information. Lane Departure Warning (LDW) is
not a substitute for safe and proper
driving. Always drive safely and use
caution. LDW may not always alert
the driver if the vehicle is driven
outside of its lane.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
A
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE50*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
HomeLink® with Auto-Dimming Rearview Mirror *†12
A HomeLink® button
B HomeLink® button
C Indicator light
D HomeLink® button
E Glare detection sensor
F Automatic dimming ON
G Automati c dimming OFF
HomeLink
® with Auto-Dimming Rearview Mirror* is designed
to reduce glare from a vehicle’s headlights located in the rear
and also to connect up to three electronic transmitters into
one location

•
To turn automatic dimming ON, press
button F

•
To turn automatic dimming OFF, press
button G
REMINDER: Mirror indicator light C will illuminate when automatic dimming
is ON

•

•You can reprogram a single HomeLink® button by repeating
Step 2

•Erasing programmed buttons will delete all trained transmitters
QUICK TIPS
How to Sync Transmitter with HomeLink®*
If programming for the first time, begin with Step 1
(repeating this step will delete all information)
To program non-rolling and rolling code garage door
openers and other devices:
1 Press and hold the left
A and center E buttons
simultaneously until the indicator light C begins to
flash (to reprogram buttons, skip this step)
2 Press and hold the desired button
A, B or D
and hold the button on the transmitter while it is
approximately 1 to 3 inches away from the mirror The
HomeLink
® Indicator light C will flash rapidly once the
frequency signal has been successfully programmed
To finish programming rolling code garage door openers,
complete these steps:
3 Locate the “learn” or “smart” button on the garage door’s motor head unit Press and
release the button and complete Step 4 within 30 seconds
4 Firmly press and release the programmed HomeLink
® button up to three times
Operating HomeLink
®:
Press one of the programmed HomeLink
® buttons
Erasing programmed buttons:
Press and hold the left
A and center D buttons simultaneously for approximately
20 seconds, and then release both buttons within 30 seconds
If your garage door opener was manufactured in 2011 or later, and you’re unable to program your vehicle’s
HomeLink® system, you may need to purchase a HomeLink® Repeater Kit. For more information, go to
www.HomeLink.com or call (800) 355-3515, or refer to section 4 in the Owner’s Manual.


HomeLink Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
OTHER KEY FEATURES
ABFGCED