
02
2-9
Light bulbBulb type Wattage
Front Type A
Headlamp
High
LEDLED
Low LEDLED
Daytime running lamp (DRL) / 
position lamp LED
LED
Turn signal lamp PY21W21
Type B Headlamp
High
LEDLED
Low LEDLED
Low beam assist LEDLED
Daytime running lamp (DRL) / 
position lamp LED
LED
Turn signal lamp (Outside mirror) LED LED
Turn signal lamp (Outside mirror) LEDLED
Rear Type A
Tail lamp
W5W5
Tail/Stop lamp P21/5W 5/21
Type B Tail lamp
LEDLED
Tail/Stop lamp LEDLED
Turn signal lamp Type A
PY21W21
Type B LEDLED
Reverse lamp W16W16
License plate lamp W5W5
High mounted stop lamp LEDLED
Interior Map lamp
Type A
W10W10
Type B LEDLED
Room lamp FESTOON 10
Personnal lamp LEDLED
Glove box lamp W5W5
Sunvisor lamp FESTOON 5
Luggage compartment lamp FESTOON 10
BULB WATTAGE   

03
3-47
Where are the air bags?
Driver’s and passenger’s front air 
bags
Driver’s front air bag
OTM030006
Passenger’s front air bag
OTM030007
Your vehicle is equipped with a 
Supplemental Restraint System (SRS) 
and lap/shoulder belts at both the driver 
and passenger seating positions.
The SRS consists of air bags which are 
located in the center of the steering 
wheel and the passenger’s side front 
panel pad above the glove box. 
The air bags are labeled with the letters 
“AIR BAG” embossed on the pad covers.
The purpose of the SRS is to provide the 
vehicle’s driver and front passengers with 
additional protection than that offered 
by the seat belt system alone in case of a 
frontal impact of sufficient severity.
The SRS uses sensors to gather 
information about the driver’s and front 
passenger's seat belt usage and impact 
severity.The seat belt buckle sensors determine 
if the driver and front passenger's seat 
belts are fastened. These sensors provide 
the ability to control the SRS deployment 
based on whether or not the seat belts are 
fastened, and how severe the impact is.
The advanced SRS offers the ability to 
control the air bag inflation within two 
levels. A first stage level is provided for 
moderate-severity impacts. A second 
stage level is provided for more severe 
impacts.
According to the impact severity, and 
seat belt usage, the SRS Control Module 
(SRSCM) controls the air bag inflation. 
Failure to properly wear seat belts can 
increase the risk or severity of injury in an 
accident.
 WARNING
To reduce the risk of serious injury or 
death from inflating front air bags, take 
the following precautions:
•	
Seat belts must be worn at all times 
to help keep occupants positioned 
properly.
•	 Move your seat as far back as 
possible from front air bags, while 
still maintaining control of the 
vehicle.
•	 Never lean against the door or center 
console.
•	 Do not allow the front passenger 
to place their feet or legs on the 
dashboard.
•	 No objects (such as crash pad 
cover, mobile phone holder, cup 
holder, perfume or stickers) should 
be placed over or near the air bag 
modules on the steering wheel, 
instrument panel, windshield glass, 
and the front passenger’s panel 
above the glove box. Such objects 
could cause harm if the vehicle is in a 
crash severe enough to cause the air 
bags to deploy.
•	 Do not attach any objects on the 
front windshield and inside mirror.   

03
3-53
Driver’s front air bag (3)
ODN8039079L
Passenger’s front air bag
ODN8039080L
After complete inflation, the air bag 
immediately starts deflating, enabling 
the driver to maintain forward visibility 
and the ability to steer or operate other 
controls.
 WARNING
To prevent objects from becoming 
dangerous projectiles when the 
passenger’s air bag inflates:
•	Do not install or place any objects 
(drink holder, CD holder, stickers, 
etc.) on the front passenger’s panel 
above the glove box where the 
passenger’s air bag is located.
•	 Do not install a container of liquid 
air freshener near the instrument 
cluster or on the instrument panel 
surface.
What to expect after an air bag 
inflates
After a frontal or side air bag inflates, it 
will deflate very quickly. Air bag inflation 
will not prevent the driver from seeing 
out of the windshield or being able 
to steer. Curtain air bags may remain 
partially inflated for some time after they 
deploy.
 WARNING
After an air bag inflates, take the 
following precautions:
•	Open your windows and doors as 
soon as possible after impact to 
reduce prolonged exposure to the 
smoke and powder released by the 
inflating air bag.
•	 Do not touch the air bag storage 
area’s internal components 
immediately after an air bag has 
inflated. The parts that come into 
contact with an inflating air bag may 
be very hot.
•	 Always wash exposed skin areas 
thoroughly with cold water and mild 
soap.
•	 We recommend that an authorized 
HYUNDAI dealer replace the air bag 
immediately after deployment. Air 
bags are designed to be used only 
once.   

03
3-65
SRS care
The SRS is virtually maintenance-free 
and there are no parts you can safely 
service by yourself. If the SRS air bag 
warning light does not illuminate when 
the Engine Start/Stop button is in the 
ON position, or continuously remains 
on, we recommend that the system be 
immediately inspected by an authorized 
HYUNDAI dealer.
We recommend any work on the SRS 
system, such as removing, installing, 
repairing, or any work on the steering 
wheel, the front passenger’s panel, front 
seats and roof rails be performed by an 
authorized HYUNDAI dealer. Improper 
handling of the SRS system may result in 
serious personal injury. WARNING
To reduce the risk of serious injury or 
death take the following precautions:
•	Do not attempt to modify or 
disconnect the SRS components or 
wiring, including the addition of any 
kind of badges to the pad covers or 
modifications to the body structure.
•	 Do not place objects over or near 
the air bag modules on the steering 
wheel, instrument panel, and the 
front passenger’s panel above the 
glove box.
•	 Clean the air bag pad covers with 
a soft cloth moistened with plain 
water. Solvents or cleaners could 
adversely affect the air bag covers 
and proper deployment of the 
system.
•	 We recommend that inflated air 
bags be replaced by an authorized 
HYUNDAI dealer.
•	 If components of the air bag system 
must be discarded, or if the vehicle 
must be scrapped, certain safety 
precautions must be observed. 
We recommend that you consult 
an authorized HYUNDAI dealer for 
the necessary information. Failure 
to follow these precautions could 
increase the risk of personal injury.   

05
5-103
Air conditioning system operation tips
•	If the vehicle has been parked in 
direct sunlight during hot weather, 
open the windows for a short time 
to let the hot air inside the vehicle 
escape.
•	 After sufficient cooling has been 
achieved, switch back from the 
recirculated air to the fresh outside air 
position.
•	 To help reduce moisture inside of 
the windows on rainy or humid 
days, decrease the humidity inside 
the vehicle by operating the air 
conditioning system with the windows 
and sunroof closed.
•	 Use the air conditioning system every 
month for a few minutes to ensure 
maximum system performance.
•	 If you operate the air conditioner 
excessively, the difference between 
the temperature of the outside air and 
that of the windshield could cause 
the outer surface of the windshield to 
fog up, causing loss of visibility. In this 
case, set the mode selection knob to 
the 
 position and set the fan speed 
control knob to the lowest speed 
setting.
System maintenance
Cabin air filter
OIK047401L[A] : Outside air, [B] : Recirculated air
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
The cabin air filter is installed behind 
the glove box. It filters the dust or other 
pollutants that enter the vehicle through 
the heating and air conditioning system.
We recommend that the cabin air filter 
be replaced by an authorized HYUNDAI 
dealer according to the maintenance 
schedule.
If the vehicle is being driven in severe 
conditions such as dusty or rough roads, 
more frequent climate control filter 
inspections and changes are required.
If the air flow rate suddenly decreases, 
we recommend the system be checked 
at an authorized HYUNDAI dealer.   

05
5-113
Air conditioning system operation tips
•	If the vehicle has been parked in 
direct sunlight during hot weather, 
open the windows for a short time 
to let the hot air inside the vehicle 
escape.
•	 After sufficient cooling has been 
achieved, switch back from the 
recirculated air to the fresh outside air 
position.
•	 To help reduce moisture inside of 
the windows on rainy or humid 
days, decrease the humidity inside 
the vehicle by operating the air 
conditioning system with the windows 
and sunroof closed.
•	 Use the air conditioning system every 
month for a few minutes to ensure 
maximum system performance.
•	 If you operate the air conditioner 
excessively, the difference between 
the temperature of the outside air and 
that of the windshield could cause 
the outer surface of the windshield to 
fog up, causing loss of visibility. In this 
case, set the mode selection button to 
the 
 position and set the fan speed 
control knob to the lowest speed 
setting.
System maintenance
Cabin air filter
OIK047401L[A] : Outside air, [B] : Recirculated air
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
The cabin air filter is installed behind 
the glove box. It filters the dust or other 
pollutants that enter the vehicle through 
the heating and air conditioning system.
We recommend that the cabin air filter 
be replaced by an authorized HYUNDAI 
dealer according to the maintenance 
schedule. If the vehicle is being driven 
in severe conditions such as dusty or 
rough roads, more frequent climate 
control filter inspections and changes are 
required.
If the air flow rate suddenly decreases, 
we recommend the system be checked 
at an authorized HYUNDAI dealer.   

Convenient features
5-122
 WARNING
Never store cigarette lighters, propane 
cylinders, or other flammable/explosive 
materials in the vehicle. These items 
may catch fire and/or explode if the 
vehicle is exposed to hot temperatures 
for extended periods.
 WARNING
ALWAYS keep the storage compartment 
covers closed securely while driving. 
Items inside your vehicle are moving as 
fast as the vehicle. If you have to stop 
or turn quickly, or if there is a crash, the 
items may fly out of the compartment 
and may cause an injury if they strike 
the driver or a passenger.
NOTICE
To avoid possible theft, do not leave 
valuables in the storage compartments.
Center console storage
OTM050037
To open:
Press the button.
Glove box
OTM050223L
To open:
Pull the lever (1).
 WARNING
ALWAYS close the glove box door after 
use.
An open glove box door can cause 
serious injury to the passenger in an 
accident, even if the passenger is 
wearing a seat belt.
STORAGE COMPARTMENT    

Maintenance
9-24
Filter inspection
The cabin air filter should be replaced 
according to the Maintenance Schedule. 
If the vehicle is operated in severely air-
polluted cities or on dusty rough roads 
for a long period, it should be inspected 
more frequently and replaced sooner. 
Replace the cabin air filter by following 
the procedure below and be careful to 
avoid damaging other components.
Filter replacement
OTM090009
1. Open the glove box and remove the 
support rod (1).
OTM090010
2. Remove the stoppers on both sides to 
allo w the glove box to hang freely on 
the hinges.
OTM090011
3. Press and hold the lock on the right 
side o f the cover.
4.
 Pull out the cov
er.
5.
 Replace the cabin air filt
er.
6.
 Reassemble in the r
everse order of 
disassembly.
NOTICE
OHI078055
Install a new cabin air filter in the 
correct direction with the arrow symbol 
(↓) facing downwards, to prevent noise 
and improve effectiveness.
CABIN AIR FIL TER