Page 29 of 444
3-11
03
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 *2 *4
(drain and refill)Petrol 1.0 T-GDi b ACEA C2
Petrol Smartstream G1.2 bSAE 0W20, API SN PLUS/SP
or ILSAC GF-6
(Diesel) 1.5 WGT bACEA C5, 0W-20
Manual
transmission fluid
(Intelligent manual
transmission fluid)Petrol 1.0 T-GDi a b
API GL-4, SAE 70W Petrol Smartstream G1.2 a b
(Diesel) 1.5 WGT a b
Intelligent manual
transmission
system actuator
fluidPetrol 1.0 T-GDi b SAE J1704 DOT-4 LV,
ISO4925 CLASS-6,
FMVSS116 DOT-4,
FMVSS116 DOT-3
Dual clutch
transmission fluidPetrol 1.0 T-GDi a bAPI GL-4, SAE 70W
Intelligent variable
transmission fluidPetrol Smartstream G1.2 bCVTF SP-CVT1 *
3
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*
2 : Requires grade engine oil. If a lower grade engine oil (mineral oil
including Semi-synthetic other than API SN plus) is used, then the engine oil and engine oil
filter must be replaced as indicated severe maintenance condition.
*
3 : Use only specified genuine Intelligent Variable Transmission fluid. The use of non-specified
fluid (even marked as compatible with genuine) could result in shift quality deterioration and
vibrations, eventually, the transmission failure.
*
4 :We recommend that you use the engine oils approved by HYUNDAI Motor India Ltd. We
recommend that you consult an authorized HYUNDAI dealer for details.
CoolantPetrol 1.0 T-GDi b
MIXTURE, Antifreeze with
water (Ethylene glycol base
coolant for aluminum radiator) Petrol Smartstream G1.2 b
Diesel 1.5 WGT b
Brake/Clutch fluid a b FMVSS116 DOT-4
Fuel 37b-
Page 30 of 444
3-12
Vehicle information
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher
viscosity engine oils are required for satisfactory lubrication in hot weather.
Using oils of any viscosity other than those recommended could result in engine
damage.
When choosing an oil, consider the range of temperature your vehicle will be
operated in before the next oil change. Proceed to select the recommended oil
viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40
-10 0 20 40 60 80 100
0W-20/30
5W-30(Diesel) 1.5 WGT
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
Petrol
Engine
Oil
0W-20
20W-50
10W-30
15W-40
0W-30, 5W-30, 5W-40
1.0 T-GDi
Smartstream
G1.2 *1
*1 : If mineral oil or semi-synthetic oil is used, it is a severe maintenance condition in
terms of engine oil change.
Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty or
sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt and grit from entering the engine and other
mechanisms that could be damaged.
An engine oil displaying this American Petroleum Institute(API)
Certification Mark conforms to the International Lubricant
Specification Advisory Committee (ILSAC). It is recommended to only
use engine oils that uphold this API Certification Mark.
Page 92 of 444
5-2
Instrument cluster
INSTRUMENT CLUSTER
1. Tachometer
2. Speedometer
3. Fuel gauge
4. Temperature gauges
5. Warning and light indicators
The actual cluster in the vehicle may differ from the illustration.
For more details, refer to the “Gauges” in this chapter.
„ „Type AType A
„ „Type BType B
OBI3040014/OBI3040001OBI3040014/OBI3040001
Page 95 of 444
5-5
05
The tachometer indicates the
approximate number of engine
revolutions per minute (rpm).
Use the tachometer to select the correct
shift points and to prevent lugging and/
or over-revving the engine.
NOTICE
Do not operate the engine within the
tachometer’s RED ZONE. This may
cause severe engine damage.
Fuel Gauge
OIB044114OIB044114
„ „Type AType A
„ „Type BType B
OBI3040005OBI3040005
This gauge indicates the approximate
amount of fuel remaining in the fuel
tank.
i Information
• The fuel tank capacity is given in
chapter 2.
• The fuel gauge is supplemented by
a low fuel warning light, which will
illuminate when the fuel tank is nearly
empty.
• On inclines or curves, the fuel gauge
pointer may fluctuate or the low fuel
warning light may come on earlier than
usual due to the movement of fuel in the
tank.
WARNING
Running out of fuel can expose vehicle
occupants to danger.
You must stop and obtain additional
fuel as soon as possible after the
warning light comes on or when the
gauge indicator comes close to the “E
(Empty)” level.
NOTICE
Avoid driving with a very low fuel
level. Running out of fuel could cause
the engine to misfire damaging the
catalytic converter.
Page 98 of 444
5-8
Instrument cluster
Intelligent Variable Transmission
Shift Indicator (if equipped)
OIB044118OIB044118
„ „ Type A Type A
OIB044115OIB044115
„ „Type BType B
This indicator displays which
continuously variable transmission shift
lever is selected.
• Park : P
• Reverse : R
• Neutral : N
• Drive : D
• Sports Mode : 1, 2, 3, 5, 6, 7, 8
Manual Transmission Shift Indicator
(if equipped)
OIB044152OIB044152
„ „ Type A Type A
OIB044151OIB044151
„ „Type BType B
This indicator informs which gear is
recommended while driving, to save
fuel.
• Shifting up : 2, 3, %4, %5, %6
• Shifting down :'1, '2, '3, '4, '5
For example
: Indicates that shifting up to the 3rd
gear is recommended (currently the
shift lever is in the 2nd or 1st gear).
: Indicates that shifting down to the
3rd gear is recommended (currently
the shift lever is in the 4th, 5th, or
6th gear).
When the system is not working
properly, the indicator is not displayed.
Page 101 of 444
5-11
05
Electric Power Steering
(EPS) Warning Light
This warning light illuminates:
• Once you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
• When there is a malfunction with the
EPS.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.
Malfunction Indicator
Lamp (MIL)
This warning light illuminates:
• Once you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.
• When there is a malfunction with the
emission control system.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer.
NOTICE
- Malfunction Indicator Lamp (MIL)
Driving with the Malfunction Indicator
Lamp (MIL) on may cause damage to
the emission control systems which
could effect drivability and/or fuel
economy.
NOTICE
- Petrol Engine
If the Malfunction Indicator Lamp
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer as soon as
possible.
NOTICE
- Diesel Engine
If the Malfunction Indicator Lamp
(MIL) blinks, some error related to the
injection quantity adjustment occurs
which could result in loss of engine
power, combustion noise and poor
emission.
In this case, we recommend that
you have the engine control system
inspected by an authorized HYUNDAI
dealer.
Page 103 of 444
5-13
05
NOTICE
- Engine Oil Pressure Warning Light
• If the engine does not stop
immediately after the Engine Oil
Pressure Warning Light is illuminated,
severe damage could result.
• If the warning light stays on while the
engine is running, it indicates that
there may be serious engine damage
or malfunction. In this case,
1. Stop the vehicle as soon as it is safe
to do so.
2. Turn off the engine and check the
oil level. If the oil level is low, fill
the engine oil to the proper level.
3. Start the engine again. If the
warning light stays on after the
engine is started, turn the engine
off immediately. In this case, we
recommend that you have the
vehicle inspected by an authorized
HYUNDAI dealer.
Low Fuel Level Warning
Light
This warning light illuminates:
When the fuel tank is nearly empty.
If the fuel tank is nearly empty, add fuel
as soon as possible.
NOTICE
- Low Fuel Level
Driving with the Low Fuel Level
warning light on or with the fuel level
below “E (Empty)” can cause the
engine to misfire and damage the
catalytic converter (if equipped).
Page 104 of 444
5-14
Instrument cluster
Fuel Filter Warning Light
(for diesel engine)
This warning light illuminates:
• When water has accumulated inside
the fuel filter.
In this case, remove the water from
the fuel filter.
For more details, refer to “Fuel Filter” in
chapter 9.
NOTICE
• When the Fuel Filter Warning Light
illuminates, engine power (vehicle
speed & idle speed) may decrease.
• If you keep driving with the warning
light on, engine parts (injector,
common rail, high pressure fuel
pump) may be damaged. If this
occurs, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer as soon
as possible.
Exhaust System (DPF)
Warning Light (for diesel
engine, if equipped)
This warning light illuminates:
• When there is a malfunction with the
Diesel Particulate Filter (DPF) system.
When this warning light illuminates, it
may turn off after driving the vehicle:
- at more than 60 km/h (37 mph), or
- above 2nd gear with 1500 ~ 2500
engine rpm for a certain time (for
about 25 minutes).
If this warning light blinks in spite of
the procedure, we recommend that you
have the DPF system checked by an
authorized HYUNDAI dealer.
NOTICE
If you continue to drive with the DPF
warning light blinking for a long time,
the DPF system can be damaged and
fuel consumption can worsen.
