2021 HONDA CR-V wiper blades

[x] Cancel search: wiper blades

Page 5 of 690

HONDA CR-V 2021  Owners Manual (in English) Contents
This owner’s manual should be considered a permanent part of the 
vehicle and should remain with the vehicle when it is sold.
This owner’s manual covers all models of your vehicle. You ma

Page 37 of 690

HONDA CR-V 2021  Owners Manual (in English) 36
Quick Reference Guide
Maintenance (P575)
Under the Hood (P584)
●Check engine oil, engine coolant, and windshield washer 
fluid. Add when necessary.
●Check brake fluid.●Check the 12-volt batte

Page 198 of 690

HONDA CR-V 2021  Owners Manual (in English) 197
uuOperating the Switches Around the Steering Wheel uWipers and Washers
Continued
Controls
Wipers and Washers
The windshield wipers and washers can be 
used when the power mode is in ON.
■MIST
Th

Page 576 of 690

HONDA CR-V 2021  Owners Manual (in English) 575
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 576
Safety When Performing Maintenance ..577Parts and Fluids Used in Main

Page 577 of 690

HONDA CR-V 2021  Owners Manual (in English) 576
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle 
in good condition. If you become aware of

Page 600 of 690

HONDA CR-V 2021  Owners Manual (in English) 599Continued
Maintenance
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and 
the hard surfaces of the blad

Page 601 of 690

HONDA CR-V 2021  Owners Manual (in English) 600
uuChecking and Maintaining Wiper Blades uChanging the Front Wiper Blade Rubber
Maintenance
4. Press up on and hold the tab, then slide 
the holder off the wiper arm.
5. Pull the end of the wiper b

Page 602 of 690

HONDA CR-V 2021  Owners Manual (in English) 601
uuChecking and Maintaining Wiper Blades uChanging the Front Wiper Blade Rubber
Maintenance
7. Slide the new wiper blade onto the holder 
from the bottom end.
u The tab on the holder should fit in
Page:   1-8 9-16 next >