2021 GENESIS G80 remote control

158
Making Phone Calls
hanging up calls
1. To finish a phone conversation, press [ End] on the screen or [W] button on the steering
wheel remote control.
2. The phone is hung up.
,noTe
䠐To control the mic volume during a phone conversation, press [Outgoing Volume].
䠐To cut the sound delivered to the other party during a phone conversation, press [Mic
Off].
䠐To open dial pad during a phone conversation, press [Keypad].
seTTing blueToo Th
1. Press [Setup] > [Bluetooth] > [Bluetooth Connections] on the home screen. Bluetooth
settings screen opens.
2. For more details, refer to the "Device Connection settings".
,noTe
Pressing [a] on the dial pad also opens Bluetooth setting screen.

159
Making Phone Calls
seTTing ouTgoing Volume
Sets outgoing volume for phone conversations.
1. Press [Outgoing Volume] during a phone conversation.
2. Drag and touch to adjust outgoing volume.
seTTing mic on/off
Cuts the sound delivered to the other party during a phone conversation.
1. Press [Mic Off] during a phone conversation.
2. To turn mic on again, press [Mic On].
,noTe
Mic can be turned on/off during a phone conversation by pressing [f] button on the
steering wheel remote control.

218
Button/TouchPad settings
mode buTTon (sTeering wheel)
This menu is used to access to selected media by using [MODE] button on the steering wheel
remote control.
Only active/available media can be accessed.
1. On the button/touch pad settings screen, press [Mode Button (Steering Wheel)].
2. Press the desired item.
home buTTon (b Y genesis conTroller)
This menu is used to set the function to be activated when the [HOME] button is pressed
briefly.
1. On the button/touch pad settings screen, press the [HOME button (by Genesis controller)].
2. Press the desired item.

236
Voice Memo
creaTing a Voice memo
geTTing sT arTed wiTh Voice memo
1. Press [Voice Memo] on the home screen.
2. Press [] on the voice memo screen.
3. Create a voice recording.
pausing Voice memo
Press [M] among voice memo.
ending and sa Ving of Voice memo
Press [Z] on the voice memo screen or press [L] on the steering wheel remote control.
,noTe
䠐All the sounds will not be output while the voice memo is operating.
䠐Voice memo pauses when you receive a Bluetooth phone call while the voice memo is
operating.
䠐It is located at the top of the voice memo list in the form of 'VoiceMemo0001 ~
VoiceMemo6000'.
䠐When the storage space is full during a voice memo, the voice memo is automatically
saved and ends.

242
Using Voice Recognition System
sTar Ting V oice recogniTion
1. Press the [i] button on the steering wheel remote control.
2. Say the desired voice command after the beep sound.
,noTe
䠐For proper recognition, please say the command after the voice instruction and beep
sound.
䠐When starting voice recognition, the voice command entry window with four
representative commands is displayed.
䠐If voice recognition is in [Beginner], then the system will provide the detailed voice
recognition guidance. If voice recognition is in [Standard], then the system will provide
the simple version of voice recognition guidance. If voice recognition is in [Expert], then
you will only hear a beep.
sKipping prompT messages
While a prompt is playing, press the [i] button on the steering wheel remote control quickly.
The prompt is immediately ended and a beep will sound.
After the beep, please say the voice command.
re-s Tar Ting V oice recogniTion
While the system waits for input, press the [i] button on the steering wheel remote control
quickly.
The beep tone will sound, indicating the system is listening for a new input.
Say a voice command.
ending Voice recogniTion
䠐While voice recognition is operating, press and hold the [i ] button on the steering wheel
remote control, or say "Exit".
䠐While using voice recognition, pressing other button except on the steering wheel remote
control or a different button on head unit will end voice recognition.
adjusTing V oice recogniTion V olume
While voice recognition is operating, turn [:/VOL] the wheel up/down on the front seat
control key or press [J/I] on the steering wheel remote control.

243
Using Voice Recognition System
basic opera Tion for Voice command ( seTTing fm)
1. Press the [i] button on the steering wheel remote control.
The system waits for your command and displays a list of available commands on the
screen.
2. If you hear a beep sound after voice guidance, say “Tune to FM”.

244
Using Voice Recognition System
abouT Voice command “help”
1. Press the [i] button on the steering wheel remote control.
2. If you hear a beep sound after voice guidance, say “Help”. The available commands are
displayed on the screen.
3. Select or say the displayed command on the screen.