2021 FORD EXPEDITION fuel

[x] Cancel search: fuel

Page 192 of 574

FORD EXPEDITION 2021  Owners Manual AUTO-START-STOP
The system helps reduce fuel consumption
by automatically stopping and restarting
the engine when your vehicle has stopped.
The engine restarts automatically when
you release the brake

Page 195 of 574

FORD EXPEDITION 2021  Owners Manual SAFETY PRECAUTIONS
WARNING: Do not overfill the fuel
tank. The pressure in an overfilled tank
may cause leakage and lead to fuel spray
and fire. WARNING: 
The fuel system may
be under pressure. If you

Page 196 of 574

FORD EXPEDITION 2021  Owners Manual Some fuel stations, particularly those in
high altitude areas, offer fuels posted as
regular unleaded gasoline with an octane
rating below 87. The use of these fuels
could result in engine damage that

Page 197 of 574

FORD EXPEDITION 2021  Owners Manual Use the following guidelines to avoid
electrostatic charge build-up, which can
produce a spark, when filling an
ungrounded fuel container:
•
Only use an approved fuel container to
transfer fuel to y

Page 198 of 574

FORD EXPEDITION 2021  Owners Manual REFUELING
Refueling System Overview
Fuel filler door.
A
Fuel tank filler valve.
B
Fuel tank filler pipe.
C
Your vehicle does not have a fuel tank filler
cap. Left-hand side. To open the fuel
filler do

Page 199 of 574

FORD EXPEDITION 2021  Owners Manual WARNING: The fuel system may
be under pressure. If you hear a hissing
sound near the fuel filler inlet, do not
refuel until the sound stops. Otherwise,
fuel may spray out, which could cause
serious pe

Page 200 of 574

FORD EXPEDITION 2021  Owners Manual 5. Operate the fuel pump nozzle within
the area shown. 6.
When the nozzle shuts off, wait at least
5 seconds, then slightly raise the fuel
pump nozzle and slowly remove it.
7. Fully close the fuel fil

Page 201 of 574

FORD EXPEDITION 2021  Owners Manual Filling the Fuel Tank
For consistent results when refueling:
•
Turn the ignition off before fueling; an
inaccurate reading results if the engine
is left running.
• Use the same fill rate
(low-medi