2021 CITROEN C1 ECU

133
C1_en_Chap06_securite_ed01-2016
"Baby P2C Mini" and its ISOFIX bas e
(size c ategories: C , D, E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   anchorage  
r

ings
 A .
T

he   base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This
  seat   can   also   be   secured   with   a   seat  
bel

t.
In
 
this   case   only   the   seat   shell   is   used   and   is  
a

ttached   to   the   vehicle's   seat   by   the   three-
point
  seat   belt.
ISOFIX child seats recommended by CITROËN
CITROËN offers a range of ISOFIX child seats listed and type approved for your vehicle.
R efer   also   to   the   child   seat   manufacturer's   fitting   instructions   for   information   on   installing   and   removing   the   seat.
The
  ISOFIX   BABY   P2C   base   must   be   installed   so   that   on   the   ISOFIX   clamps,   the   N
os 3, 4 and 5 are visible. And the support leg must have 6 holes visible.
"
RÖMER Baby- Safe Plus" and its ISOFIX base
(size
 
category:
 
E )
Group 0+: from bir th to 13 kg
Installed
 
rear ward
 
facing
 
using   an   ISOFIX  
b

ase
 
which
 
is
 
attached
 
to
 
the
 
rings   A.
The
 
base
 
has
 
a
 
support
 
leg,
 
adjustable   for  
h

eight,
 
which
 
sits
 
on
 
the
 
vehicle's   floor.
This
 
child
 
seat
 
can
 
also
 
be
 
secured   with   a  
s

eat
 
belt.
 
In
 
this
 
case,
 
only
 
the   shell   is   used  
a

nd
 
attached
 
to
 
the
 
vehicle's
 
seat   by   the  
t

hree-point
 
seat
 
belt.
6
Safety

134
C1_en_Chap06_securite_ed01-2016
"Baby P2C Midi" and its ISOFIX base (size categories: D , C, A, B, B1)
Group 1: from 9 to 18 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   anchorage  
r

ings
 A .
T

he   base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This
  child   seat   can   also   be   used   for ward  
f

acing.
This seat can not
 

be   secured   with   a   seat  
bel

t.
We
  recommend   that   you   use   the   seat   in   the  
r

ear ward   facing   position   up   to   the   age   of  
3 ye

ars. "RÖMER Duo Plus ISOFIX"
(size   category:   B1)
Group 1: from 9 to 18 kg
Is
  installed   only   in   the   for ward   facing  
p

osition.
Is
  attached   to   the   anchorage   rings   A   and   the  
u

pper   anchorage   ring   B,
  referred   to   as   the  
T

OP   TETHER,   using   an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,  
l

ying   down.
We
  recommend   the   lying   down   position.
This
  child   seat   can   also   be   used   on   seats  
n

ot   equipped   with   ISOFIX   mountings.   In  
t

his   case,   it   must   be   secured   to   the   vehicle's  
s

eat   by   the   three-point   seat   belt.   Adjust   the  
p

osition   of   the   vehicle's   front   seat   so   that   the  
c

hild's   feet   are   not   touching   the   backrest.
Safety

135
C1_en_Chap06_securite_ed01-2016
Table of locations for ISOFIX child seats
In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX m ountings.
In
  the   case   of   the   universal   and   semi-universal   ISOFIX   child   seats,   the   child   seat's   ISOFIX   size   category,   determined   by   a   letter   between   A   and   G, is
indicated
  on   the   child   seat   next   to   the   ISOFIX   logo.
IUF :
  
S
eat   suitable   for   the   installation   of   an  
Un

iversal I sofix
  seat,   For ward
  facing   with  
t

he   "Top   Tether"   upper   strap.
IL- SU :
  
S
eat   suitable   for   the   installation   of   a  
Se

mi-Universal I SOFIX
  seat,   that   is:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg
-
 
f
or ward   facing   fitted   with   a   support   leg
-
 
a
n   infant   carrier   fitted   with   an   upper   strap  
o

r   a   support   leg. Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up to about 6 months Less than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   about   1   yearFrom 9 to 18 kg (group 1)
From
  about   1-3   years
Type of ISOFIX child seat Infant carrierrearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front passenger seat Not ISOFIX
Rear seats XIL- SU

(2) I L- SU (1) IL- SU
(2) IL- SU
(1) IUF
IL- SU
Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   with   a  
b

ackrest   on   a   passenger   seat.   Refit   the  
h

ead   restraint   once   the   child   seat   has  
b

een   removed.
To attach the upper strap, refer to the "ISOFIX
mountings"
 se

ction.
(1) :
  
T
he   front   seat   must   be   adjusted   to  
9
  notches   back   from   the   fully   for ward  
p

osition.
(2):
  
T
he   front   seat   must   be   adjusted   to  
4 n

otches   back   from   the   fully   for ward  
p

osition.
6
Safety

136
C1_en_Chap06_securite_ed01-2016
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection   in  
t

he   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harnesses   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
For
  the   installation   of   a   child   seat   using   a  
s

eat   belt,   ensure   that   this   is   well   tensioned  
o

n   the   child   seat   and   that   it   is   holding   the  
c

hild   seat   firmly   against   the   seat   of   your  
v

ehicle.   If   your   front   passenger   seat   is  
a

djustable,   move   it   for ward   if   necessary.
At the rear seats, always leave sufficient
space
  between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   feet   of   a   child   seated   in   a   for ward  
f

acing   child   seat.
For
  this,   move   the   front   seat   for ward   and   if  
n

ecessary   straighten   its   backrest.
Recommendations on child seats
The chest part of the seat belt must be positioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
As
  a   safety   precaution,   never   leave:
-
 
o
ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   "Child   lock".
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
The
 
legislation
 
on
 
carrying
 
a
 
child
 
on
 
the
 
f

ront
 
passenger
 
seat
 
is
 
specific
 
to
 
each
 
c

ountry.
 
Refer
 
to
 
the
 
legislation
 
in
 
force
 
in
 
y

our
 
country.
Deactivate
 
the
 
passenger's
 
front
 
airbag
 
w

hen
 
a
 
rear ward
 
facing
 
child
 
seat
 
is
 
installed
 
o

n
 
the
 
front
 
seat.
 
Other wise,
 
the
 
child
 
would
 
r

isk
 
being
 
seriously
 
injured
 
or
 
killed
 
if
 
the
 
a

irbag
 
were
 
deployed.
For
 o

ptimum
 in

stallation
 o

f
 t

he
 fo

rward
 f

acing
 c

hild
 
seat,
 
ensure
 
that
 
the
 
back
 
of
 
the
 
child
 s
eat
 
is
 
as
 
close
 
as
 
possible
 
to
 
the
 
backrest
 o
f
 
the
 
vehicle's
 
seat,
 
or
 
in
 
contact
 
if
 
possible.
The
 
head
 
restraint
 
must
 
be
 
removed
 
before
 
i

nstalling
 
a
 
child
 
seat
 
with
 
a
 
backrest
 
on
 
the
 
p

assenger
 sea

t.
Ensure
 
that
 
the
 
head
 
restraint
 
is
 
stowed
 
or
 
a

ttached
 
securely
 
so
 
that
 
it
 
is
 
not
 
thrown
 
a

round
 
the
 
vehicle
 
in
 
the
 
event
 
of
 
sharp
 
b

raking.
Refit
 
the
 
head
 
restraint
 
as
 
soon
 
as
 
the
 
child
 
s

eat
 
is
 
removed.
Installing a booster
cushion
Children at the front
Safety

137
C1_en_Chap06_securite_ed01-2016
Child lock
This prevents the opening of the rear doors from   the   inside.
The
  controls   are   located   on   the   edge   of   each  
r

ear   door.
F
 
L
ower   the   control.
Check
  the   status   of   this   safety   device   before  
s

witching   on   the   ignition.
This
  system   is   independent   of   the   central  
l

ocking.
6
S

142
C1_en_Chap07_info-pratiques_ed01-2016
Accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese   accessories   and   parts   are   all   suitable   for   your   vehicle   and   benefit   from   CITROËN's   recommendation   and   warranty.
"Transport solutions":


boot carpet, boot liner,
transverse
  roof   bars,   bicycle   carrier,   ski   carrier,  
r

oof   boxes,   boot   dividers,   ...
"Styling":
 

rear   diffuser,   aluminium   gear   knob,  
a

lloy   wheels,   exterior   expressive   stickers,  
c

hrome   mirror   shells,   door   sill   finishers,   ...
"Comfort" :
 

door   deflectors,   insulated   module,  
s

un   blinds,   scented   air   freshener,   portable  
a

shtray,   coat   hanger   fitted   to   head   restraint,  
r

eading   lamp,   front   and   rear   parking   sensors,  
c

entre   armrest,   cigarette   lighter,   ..."Security and safety":
 

anti-theft   alarm,  
v

ehicle   tracking   system,   snow   chains,   wheel  
n

on-slip   covers,   wheel   security   bolts,   child  
s

eats,   first   aid   kit,   warning   triangle,   high  
v

isibility   vest,   breathalyzer,   fire   extinguisher,  
p

et   seat   belt,   foglamp   kit,   seat   belt   cutter/glass  
h

ammer,
 ...
"

Protection":
 
mats,   mud   flaps,   vehicle   cover,  
s

eat   covers,   side   protective   mouldings,   bumper  
p

rotectors,
 ...
T

o   prevent   the   mat   from   becoming   caught  
u

nder   the   pedals:
-
 
e
nsure   that   the   mat   is   secured   correctly,
-
 
n
ever   fit   one   mat   on   top   of   another."Multimedia":
 audio
  system,   speaker,   semi-
integral
  navigation   systems,   hands-free   kit,  
d

riving   assistance   systems,   230   V   socket,   rear  
m

ulti-media   support,   DVD   players,   portable  
s

atellite   navigation   system,   smartphone  
s

upport,   digital   radio,   ...
Practical information

153
C1_en_Chap08_en-cas-pannes_ed01-2016
Comprising a compressor and a sealant cartridge,   it   allows   the   temporary repair of
a
  tyre   so   that   you   can   drive   to   the   nearest  
g

arage.
It
  is   designed   to   repair   most   punctures   which  
c

ould   affect   the   tyre,   located   on   the   tyre   tread  
o

r   shoulder.
Temporary pu ncture r epair k it
Composition of the kit
1. 12  V   compressor,   with   integral   pressure  ga
uge.
2.
 S

ealant   cartridge,   with   integral   hose.
3.
 S

peed   limit   sticker.
The
  speed   limit   sticker   must   be   secured  
t

o the interior of the vehicle in the
driver's
  field   of   vision,   to   remind   you  
t

hat   a   wheel   is   in   temporary   use.
This
 k
it
 i
s
 i
nstalled
 i
n
 t
he
 s
torage
 b
ox,
 u
nder
 t
he
 b
oot
 
floor.
The
 
vehicle's
 
electric
 
system
 
allows
 
the
 
c

onnection
 
of
 
the
 
compressor
 
for
 
long
 
e

nough
 
to
 
inflate
 
a
 
tyre
 
after
 
a
 
puncture
 
r

epair. Do
  not   exceed   a   speed   of   50   mph  
(

80 km/h)   when   driving   with   a   tyre  
r

epaired   using   this   type   of   kit.
Access to the kit
8
In the event of a breakdown

154
C1_en_Chap08_en-cas-pannes_ed01-2016
F Uncoil  the   pipe   stowed   under   the  c
ompressor.
F
 
C
onnect   the   pipe   from   the   compressor   to  
t

he   sealant   cartridge.
F
 
T
urn   the   the   sealant   cartridge   and   secure   it  
i

n   the   cut-out   provided   on   the   compressor.
Repair procedure
Avoid removing any foreign bodies which   have   penetrated   into   the   tyre. F
 
R
emove   the   valve   cap   from   the   tyre   to   be  
r

epaired,   and   place   it   in   a   clean   area.
F  
C
onnect   the   hose   from   the   sealant  
c

artridge   to   the   valve   of   the   tyre   to   be  
r

epaired   and   tighten   firmly.
F
 
S

witch   off   the   ignition.
F
 
S

ecure   the   speed   limit   sticker   inside   the  
v

ehicle.
In the event of a breakdown