7F Optional equipment
REAR SEATS
FOLDING THE 40/60 REAR SEATBACKS
1. Press the button on the head restraint. The head restraint will fold automatically.
2. Make sure the seat belt is in the retainer hook.
3. Pull the lever on top of the seatback (A) and fold the seatback forward. A red tab near the lever is visible when the seat-back is unlatched.
To raise each seatback, lift it up until it locks in place.
See Seats and Restraints in your Owner’s Manual.
FOLDING FRONT PASSENGER SEATBACKF
The front passenger seatback can be folded flat for additional cargo s\
pace.
With the head restraint lowered and the seat moved as far back as possib\
le, lift the seatback adjustment lever at the base of the seatback to fold the seatba\
ck forward.
See Seats and Restraints in your Owner’s Manual.
AUTO ENGINE STOP/START OPERATION
The fuel-saving stop/start system automatically turns off the engine, re\
ferred to as an Auto Stop, when the brake pedal is pressed and the vehicle is at a compl\
ete stop, if certain operating conditions are met. In Auto Stop mode, the tachometer will rea\
d AUTO STOP. When the brake pedal is released or the accelerator pedal is pressed, th\
e engine will restart. After parking the vehicle and turning off the engine, the tacho\
meter will read OFF.
The engine may remain running or restart when the vehicle is stopped if:\
• A minimum vehicle speed is not reached.
• The engine or transmission is not at the required operating temperature.\
• The outside temperature is not in the required operating range.
• The shift lever is in any gear other than Drive (D).
• The battery charge is low.
• The climate control system requires the engine to run based on the curre\
nt settings.
• The Auto Stop time has reached the maximum allowed time.
AUTO ENGINE STOP/START DISABLE
Press the $ Stop/Start button on the center console to turn off the automatic engine stop/start system. The button indicator is illuminated when the s\
ystem is off. The Auto Engine Stop/Start system turns on each time the vehicle is star\
ted.
See Driving and Operating in your Owner’s Manual.
A
18
SETTING CRUISE CONTROL
Press the On/Off button. The Cruise Control symbol will illuminate in white on the instrument cluster.
When traveling at the desired speed, press the switch down to the SET– position to set the speed. The symbol will illuminate in green on the instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press up to resume a set speed. When active, press up to increase speed.\
SET– Set/Coast
When active, press down to decrease speed.
Cancel
Press the button, or press the brake pedal, to cancel the Cruise Control without
erasing the set speed from memory.
The set speed is erased when Cruise Control or the vehicle ignition is t\
urned off.
ADAPTIVE CRUISE CONTROL–CAMERAF
The system enhances regular Cruise Control to maintain a following gap —\
the time between your vehicle and a vehicle detected directly ahead — by accel\
erating or braking automatically while you continue to steer.
Press the Following Gap button to select a gap setting of Far, Medium or Near. This is also the Forward Collision Alert setting.
Press and hold the Cancel button to switch between regular Cruise Control and Adaptive Cruise Control.
CRUISE CONTROLF
See Driving and Operating in your Owner’s Manual.
Manual mode allows you to choose the top gear limit. It can be used to limit the vehicle’s speed when driving downhill or towing a trailer.
1. Move the shift lever to L (Low).
2. Press the + (plus) or – (minus) button on the shift lever to increase or decrease the gear range available. The current gear will be
displayed on the Driver Information Center.
If vehicle speed is too high or low for the requested gear, the shift will not occur.
AUTOMATIC TRANSMISSION MANUAL MODE
See Driving and Operating in your Owner’s Manual.
F Optional equipment
