2021 CHEVROLET CORVETTE steering wheel

2
Driver Information Center
INSTRUMENT PANEL PERFORMANCE FEATURES
Transmission Shift ControlsDriver Information Center Controls
Manual Shift Paddles
Customizable Instrument Cluster
Performance Data RecorderF
Head-Up Display ControlsF (on instrument panel)
Traction Control & StabiliTrak Off/Front Lift SystemF/Curb View CameraF Buttons
Driver Mode ControlZ-Mode Button
Engine Start/Stop Button (on instrument panel)
TACHOMETER REDLINE
The tachometer displays the engine speed in revolutions per minute (RPM\
). If the engine is operated with the RPMs in the red warning area at the high end of the\
tachometer, vehicle damage may occur. Do not operate the engine with the RPMs past t\
he redline on the tachometer. The redline is lower when the engine is cold as well as \
during the first 500 mile break-in period.
VEHICLE MESSAGES
Messages displayed on the Driver Information Center (DIC) indicate the\
status of the vehicle. Some messages can be cleared by pressing the DIC thumbwheel con\
trol on the steering wheel; other messages that require immediate action cannot be c\
leared until that action is performed.
Read your Owner’s Manual to learn about the information being relayed by the lights and gauges of the instrument cluster.
See Introduction in your Owner’s Manual.
F Optional equipment

3
INSTRUMENT CLUSTER/DRIVER INFORMATION CENTER
The Driver Information Center (DIC) on the instru-ment cluster displays a variety of vehicle messages and system information. Use the controls on the right side of the steering wheel to view the main menus on the right side of the cluster:
Trip Computer – Display trip, fuel range and other info pages
Performance – View performance functions and vehicle operation status
Audio – Display media or radio stations; while displayed, use the DIC thum\
bwheel to seek stations
Maintenance – Display status of common maintenance items
Options – Change display information
Simplify – Display only basic information and hide info tiles and the DIC
DIC CONTROLS
Press the or button to move between the display zones.
Rotate the thumbwheel up or down to move through the menus.
Press the thumbwheel to open a menu, or to select or reset an item.
INFO TILES
A number of different info tiles showing the operation of various systems can be selected for display on the left\
side of the instrument cluster. Four tiles are available with the Track display them\
e and two tiles are available with all other display themes.
1. Use the DIC controls to open the Options menu.
2. Scroll to Info Tiles Selection. Press the thumbwheel to enter the menu.
3. Scroll through the avail-able Info Tiles. Press the thumbwheel to select a tile. It will appear on the instrument cluster. See Instruments and Controls in your Owner’s Manual.

6
DUAL CLUTCH TRANSMISSION
The Dual Clutch Transmission provides an extremely connected feel with very fast shift times for maximum performance. The transmission is electronically contro\
lled using the shift switches located on the center console. The selected gear position\
illuminates in red on the shift switch.
Park – Press the P button to shift to Park.
Reverse – Pull the R switch to shift to Reverse.
Neutral – Press and hold the N button until the indicator is red to shift to Neutral.
Drive – Pull the D switch to shift to Drive.
MANUAL MODE
The Dual Clutch Transmission can be shift-ed manually using the paddles behind the steering wheel.
With the transmission in Drive, press the Manual Mode (M) button to shift manually. Pull the left (–) steering wheel paddle to downshift and the right (+) steering wheel paddle to upshift. The current gear is displayed on the instrument cluster and HUDF. The transmission will hold the current gear until a change is requested. Pull the Drive (D) switch to return to Drive.
To engage temporary manual paddle shifts, pull either the left (–) \
or right (+) steering wheel paddle with the transmission in Drive (D). The transmission will\
return to auto-matic shifting after approximately 6 seconds of cruising at steady speed\
s and without any manual shifts or by pulling and holding the right paddle for more th\
an 1 second. Automatic shifting also will return when the vehicle stops.
To downshift to the lowest gear possible for the current vehicle speed, \
pull and briefly hold the left (–) steering wheel paddle.
If vehicle speed is too fast or too slow for the requested gear, the shi\
ft will not occur.
DOUBLE PADDLE DECLUTCH
Double Paddle Declutch allows the vehicle to temporarily disconnect the \
engine from the wheels, similar to shifting to Neutral.
Pull and hold both the left (–) and right (+) steering wheel padd\
les at the same time to activate Double Paddle Declutch. The gear position indicator on the cent\
er console will flash red and the gear position indicator on the instrument cluster wi\
ll turn gray. Release both paddles to exit Double Paddle Declutch.
See Driving and Operating in your Owner’s Manual.
F Optional equipment

7
The Driver Mode Control system can provide enhanced performance for diff\
erent driving conditions by automatically adjusting the steering, throttle progression\
, shift mode, braking response, suspensionF, traction control, engine sound, instrument cluster theme, and other calibrations (if equipped) in real time. The modes ar\
e displayed on the Driver Information Center.
Rotate the Driver Mode Control knob on the center console to select the \
desired mode:
MyMode – Allows the engine sound, steer-ing, suspensionF, and braking response to be customized to your preference in everyday driving.
Weather – Use during slippery conditions to help control wheel speed.
Tour – Use in normal driving for balanced comfort and handling.
Sport – Use where road conditions or personal preference dictate a more performance-oriented response.
Track – Use when maximum vehicle
performance is desired. Track mode is for closed racetracks.
Z-Mode – Press the Z-Mode button on the steering wheel to activate custom-ized engine sound, steering, suspensionF,
powertrain, and braking response settings for maximum handling.
The mode features vary. Not all vehicles have all features. Allow a few seconds for the changes to be activated before the current mode is displayed.
DRIVER MODE CUSTOMIZATION
The MyMode and Z-Mode settings can be customized in the Settings menu on the infotainment screen.
Go to Settings > Vehicle > MyMode or Z-Mode to change the engine sound, steering, suspensionF, powertrain, and brake response settings.
See Driving and Operating in your Owner’s Manual.
DRIVER MODE CONTROL
F Optional equipment