2021 CHEVROLET CAMARO oil

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
Driving and Operating 13
Engine OilCaution
If you use the vehicle for racing or other
competitive driving, the engine may use
more oil than it would with normal use.
Low oil levels can damage the engine. For
information on how to add oil, see
Engine Oil028.
Be sure to check the oil level often during
racing or other competitive driving and
keep the level at or near the upper mark
that shows the proper operating range on
the engine oil dipstick. The LT1 and LT4 engines are factory filled
with 0W-40 dexos2 oil. 0W-40 dexos2
engine oil is approved for both track and
street use with the LT1 and LT4 (ZL1 only,
not ZL1 1LE) engines. 15W-50 full synthetic
engine oil may also be used for track use
and is required on the ZL1 1LE, but after
track use must be changed back to 0W-40
dexos2 for street use. See
Capacities and
Specifications 043.
Fuel
Consider using 100 octane unleaded gasoline
if the air temperature is above 30 °C (86 °F)
at a track event. Do not use any fuel with
conditions listed in Prohibited Fuels025.
Automatic Transmission Fluid
Transmission fluid should be changed after
every 15 hours of track use. Any
transmission level set or change should be
performed at your dealer.
Manual Transmission Fluid
Manual transmission fluid should be
changed after every 15 hours of track usage.
Tire Pressures
Tire pressure specifications are listed
in psi (kPa). Limit the vehicle weight to a
maximum of the driver and one passenger,
with no additional cargo.

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
Driving and Operating 15
Front License Plate/Bracket Removal
(ZL1 Only)
For track use, the front license plate and
bracket can be removed from the fascia for
increased airflow. Remove the license plate
to access the four screws that attach the
license plate bracket to the front fascia.
Water Deflector
If operating a ZL1 on a closed course in hot
temperatures, remove the water deflector to
increase airflow and improve cooling.
Remove the three bolts. Replace
immediately after track use to protect the
engine compartment from water intrusion.
Torque to 4.5Y(40 lb in).
Wicker Bill
A rear spoiler wicker bill is available for
LS/LT and SS with the 1LE package only.
If equipped with a wicker bill, use the
instructions for installation.
Underbody Air Deflector Tire Dam Kit
The underbody air deflector tire dam kit
provided with ZL1 vehicles reduces the
amount of aerodynamic lift on the front
axle for better handling. The original tire
dams must be reinstalled after the track
event. For installation, see the instructions
provided with the kit.

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
26 Vehicle Care
Vehicle Care
Vehicle Checks
Engine Compartment Overview . . . . . . . . . 27
Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Engine Air Filter Life System . . . . . . . . . . . 30
Engine Air Cleaner/Filter . . . . . . . . . . . . . . . 30
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . 31
Engine Overheating . . . . . . . . . . . . . . . . . . . . . 32
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Wheels and Tires
Low-Profile Tires . . . . . . . . . . . . . . . . . . . . . . . . 32
Competition Oriented Tires . . . . . . . . . . . . . 32
Summer Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Tire Pressure for High-SpeedOperation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Towing the Vehicle
Towing the Vehicle . . . . . . . . . . . . . . . . . . . . . 35
Appearance Care
Exterior Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
28 Vehicle Care
1. Windshield Washer Fluid Reservoir.
2. Engine Coolant Surge Tank andPressure Cap.
3. Engine Oil Dipstick.
4. Engine Oil Fill Cap.
5. Brake/Clutch Fluid Reservoir.
6. Engine Air Cleaner/Filter.
7. Engine Cooling Fan (Out of View).
8. Engine Compartment Fuse Block.
9. Negative (–) Battery Terminal.
10. Positive (+) Battery Terminal.
Engine Oil
To ensure proper engine performance and
long life, careful attention must be paid to
engine oil. Following these simple, but
important steps will help protect your
investment:
.Use engine oil approved to the proper
specification and of the proper viscosity
grade. See “Selecting the Right Engine
Oil” in this section.
.Check the engine oil level regularly and
maintain the proper oil level. See
“Checking Engine Oil” and“When to Add
Engine Oil” in this section.
.Change the engine oil at the appropriate
time. See“Engine Oil Life System” in the
owner’s manual.
.Always dispose of engine oil properly. See
“What to Do with Used Oil” in this
section.
Checking Engine Oil
Check the engine oil level regularly, every
650 km (400 mi), especially prior to a long
trip. The engine oil dipstick handle is a loop.
See Engine Compartment Overview 027 for
the location.
{Warning
The engine oil dipstick handle may be
hot; it could burn you. Use a towel or
glove to touch the dipstick handle.
If a low oil Driver Information Center (DIC)
message displays, check the oil level.
Follow these guidelines:
.To get an accurate reading, park the
vehicle on level ground. Check the engine
oil level after the engine has been off for
at least two hours. Checking the engine
oil level on steep grades or too soon after
engine shutoff can result in incorrect readings. Accuracy improves when
checking a cold engine prior to starting.
Remove the dipstick and check the level.
.If unable to wait two hours, the engine
must be off for at least 15 minutes if the
engine is warm, or at least 30 minutes if
the engine is not warm. Pull out the
dipstick, wipe it with a clean paper towel
or cloth, then push it back in all the way.
Remove it again, keeping the tip down,
and check the level.
When to Add Engine Oil
If the oil is below the cross-hatched area at
the tip of the dipstick and the engine has
been off for at least 15 minutes, add 1 L (1
qt) of the recommended oil and then
recheck the level. See
“Selecting the Right
Engine Oil” later in this section for an
explanation of what kind of oil to use. For
engine oil crankcase capacity, see Capacities
and Specifications 043.

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
Vehicle Care 29
Caution
Do not add too much oil. Oil levels above
or below the acceptable operating range
shown on the dipstick are harmful to the
engine. If the oil level is above the
operating range (i.e., the engine has so
much oil that the oil level gets above the
cross-hatched area that shows the proper
operating range), the engine could be
damaged. Drain the excess oil or limit
driving of the vehicle, and seek a service
professional to remove the excess oil.
See Engine Compartment Overview 027 for
the location of the engine oil fill cap.
Add enough oil to put the level somewhere
in the proper operating range. Push the
dipstick all the way back in when through.
Selecting the Right Engine Oil
Selecting the right engine oil depends on
both the proper oil specification and
viscosity grade. See Recommended Fluids
and Lubricants 041. Specification
Use engine oils that meet the dexos2
specification. Engine oils that have been
approved by GM as meeting the dexos2
specification are marked with the dexos2
approved logo. See www.gmdexos.com.
Caution
Failure to use the recommended engine
oil or equivalent can result in engine
damage not covered by the vehicle
warranty.
Viscosity Grade
Use SAE 0W-40 viscosity grade engine oil for
the LT1 and LT4 engines.
When selecting an oil of the appropriate
viscosity grade, it is recommended to select
an oil of the correct specification. See
“Specification” earlier in this section. If 0W-40 dexos2 oil is not available, SAE
5W-30 dexos1 full synthetic engine oil may
be used for street use.
Engine Oil Additives/Engine Oil Flushes
Do not add anything to the oil. The
recommended oils meeting the dexos
specification are all that is needed for good
performance and engine protection.
Engine oil system flushes are not
recommended and could cause engine
damage not covered by the vehicle
warranty.
What to Do with Used Oil
Used engine oil contains certain elements
that can be unhealthy for your skin and
could even cause cancer. Do not let used oil
stay on your skin for very long. Clean your
skin and nails with soap and water, or a
good hand cleaner. Wash or properly
dispose of clothing or rags containing used
engine oil. See the manufacturer's warnings
about the use and disposal of oil products.
Used oil can be a threat to the environment.
If you change your own oil, be sure to drain
all the oil from the filter before disposal.
Never dispose of oil by putting it in the
trash or pouring it on the ground, into

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
30 Vehicle Care
sewers, or into streams or bodies of water.
Recycle it by taking it to a place that
collects used oil.
Engine Air Filter Life System
If equipped, this feature provides the engine
air filter’s remaining life and best timing for
a change. The timing to change an engine
air filter depends on driving and
environmental conditions.
When to Change the Engine Air Filter
When the Driver Information Center (DIC)
displays a message to replace the engine air
filter at the next oil change, follow this
timing.
When the DIC displays a message to replace
the engine air filter soon, replace the engine
air filter at the earliest convenience.
The system must be reset after the engine
air filter is changed.
If the DIC displays a message to check the
engine air filter system, see your dealer.
How to Reset the Engine Air Filter Life
System
Reset the system whenever the engine air
filter is replaced so that the system can
calculate the next engine air filter change.
To reset:1. Place the vehicle in P (Park).
2. Select Engine Air Filter Life on the DIC menu. See “Driver Information Center
(DIC)” in the owner manual.
3. Press
pto move to the Reset/Disable
display area. Select Reset then press SEL.
Then press Yes to confirm the reset.
4. 100% Air Filter Life will be displayed when the Engine Air Filter Life System is
successfully reset.
Engine Air Cleaner/Filter
The engine air cleaner/filter is in the engine
compartment on the driver side of the
vehicle.
When to Inspect the Engine Air Cleaner/
Filter
.For intervals on changing and inspecting
the engine air filter, see “Maintenance
Schedule” in the owner’s manual.
.If equipped with Engine Air Filter Life
System, see Engine Air Filter Life System
0 30.
.If driving in very dusty areas, follow the
engine air filter inspecting and changing
intervals, see “Maintenance Schedule” in
the owner’s manual.
How to Inspect/Replace the Engine Air
Cleaner/Filter
Do not start the engine or have the engine
running with the engine air cleaner/filter
housing open. Before removing the engine
air cleaner/filter, make sure that the engine
air cleaner/filter housing and nearby
components are free of dirt and debris.
Remove the engine air cleaner/filter. Lightly
tap and shake the engine air cleaner/filter
(away from the vehicle), to release loose
dust and dirt. Inspect the engine air cleaner/
filter for damage, and replace if damaged.
Do not clean the engine air cleaner/filter or
components with water or compressed air.
To inspect or replace the engine air cleaner/
filter:

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
38 Vehicle Care
.Never scrub the hood wrap surface.
.Use a wet, non-abrasive detergent.
.Do not buff or apply polishes to the
hood wrap.
.Rinse thoroughly with clean water. To
reduce water spotting, immediately use a
silicone squeegee to remove water. Finish
with a clean microfiber cloth.
Pressure Washing
.Ensure the water pressure is kept below
14,000 kPa (2,000 psi).
.Keep water temperature below 80 °C
(180 °F).
.Use a spray nozzle with a 40 degree wide
angle spray pattern.
.Keep the nozzle at least 30 cm (1 ft) away
from and perpendicular (at 90 degrees) to
any graphics.
Cleaning Underhood Components
Caution
Do not power wash any component
under the hood that has this
e
symbol.
This could cause damage that would not
be covered by the vehicle warranty. Solvents or aggressive cleaners may harm
underhood components. The usages of these
chemicals should be avoided.
Recommend water only.
A pressure washer may be used, but care
must be utilized. The following criteria must
be followed:
.Water pressure must be kept below
14 000 KPa (2,000 PSI).
.Water temperature must be below 80 °C
(180 °F).
.Spray nozzle with a 40 degree wide angle
spray pattern or wider must be used.
.Nozzle must be kept at least 30 cm (1 ft)
away from all surfaces.
Finish Care
Application of aftermarket clearcoat sealant/
wax materials is not recommended.
If painted surfaces are damaged, see your
dealer to have the damage assessed and
repaired. Foreign materials such as calcium
chloride and other salts, ice melting agents,
road oil and tar, tree sap, bird droppings,
chemicals from industrial chimneys, etc., can
damage the vehicle's finish if they remain
on painted surfaces. Wash the vehicle as
soon as possible. If necessary, use non-abrasive cleaners that are marked safe
for painted surfaces to remove foreign
matter.
Occasional hand waxing or mild polishing
should be done to remove residue from the
paint finish. See your dealer for approved
cleaning products.
Do not apply waxes or polishes to uncoated
plastic, vinyl, flat paint, or matte or textured
finishes as damage can occur.
Caution
Machine compounding or aggressive
polishing on a basecoat/clearcoat paint
finish may damage it. Use only
non-abrasive waxes and polishes that are
made for a basecoat/clearcoat paint finish
on the vehicle.
To keep the paint finish looking new, keep
the vehicle garaged or covered whenever
possible.

Chevrolet Camaro High Performance Owner Manual Supplement (GMNA-
Localizing-U.S./Canada/Mexico-14584225) - 2021 - CRC - 9/30/20
Vehicle Care 39
ZL1 1LE Spoiler
It is not recommended that the ZL1 1LE
spoiler be waxed, as it will change the gloss
level of the surface. In addition, care must
be used when waxing around the spoiler.
If a small amount of wax is applied to the
spoiler it can create an irregular appearance
to the surface of the panel. If wax, debris,
or other materials create stains on the
spoiler, see your dealer for the
recommended cleaner.
Fuel Spills
Wipe off fuel spills immediately to avoid
degrading the vinyl and adhesive. Then
wash, rinse, and dry.