2020 YAMAHA YXZ1000R SS fuel

[x] Cancel search: fuel

Page 85 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 6-3
6
EBU31731Front and rear brakesBrake pedal
Check that there is no free play in the brake
pedal. If there is free play, have a Yamaha
dealer check the brake system. (See page
9-51.)
 Check th

Page 86 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 6-4
6
WARNING
EWB02522Gasoline and gasoline vapors are ex-
tremely flammable. To avoid fires and ex-
plosions and to reduce the risk of injury
when refueling, follow these instructions. 1. Before refu

Page 87 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 6-5
6
ing ethanol can be used if the ethanol content
does not exceed 10% (E10). Gasoline con-
taining methanol is not recommended be-
cause it can cause damage to the fuel system
or vehicle performanc

Page 131 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 9-4
9
EBU37180Maintenance chartsEven if the vehicle isn’t driven for the stated mileage or engine hours, the month maintenance
intervals should still be followed. Items marked with an asterisk shoul

Page 169 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 9-42
9
Additionally, the fuel injection system
would be affected, resulting in poor engine
performance and possible overheating. Clean the primary air filter as follows. 1. Remove the air filter case

Page 174 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 9-47
9
5. Install the gasket, and then insert the tail-pipe into the muffler and align the bolt
holes.
6. Install the tailpipe bolts and tighten them
to the specified torque.
7. Install the tailpipe c

Page 192 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 9-65
9
EBU35255Fuse replacementThe main fuse, the fuel injection system fuse,
the EPS fuse, and the fuse box are located
under panel A. (See page 9-11.)If a fuse is blown, replace it as follows.1. Tur

Page 193 of 212

YAMAHA YXZ1000R SS 2020  Owners Manual 9-66
9
NOTICEECB00641To prevent accidental short-circuiting,
turn off the main switch when checking or
replacing a fuse. 2. Remove panel A. (See page 9-11.)
3. Remove the blown fuse, and then install
Page:   < prev 1-8 9-16 17-24 25-32 next >