2020 TOYOTA SUPRA steering

39
40,000 miles or 48 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs6
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
7

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:



1
inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed
4 replace brake pads when the brake warning light appears.5 initial replacement at 36 months. replace every 24 months thereafter.6 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.7 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the

41
80,000 miles or 96 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs5
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:

_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
6

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:

_
Steering linkage and boots

_
tires

_

vehicle underbody and all other
visible components

_
Warning triangle

_
Wiper and washer system

1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed.
4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the

43
120,000 miles or 144 months
Check installation of driver’s floor mat
Inspect and adjust all fluid levels1

Inspect radiator, condensor and/or intercooler
Inspect wiper blades
Perform road test

Replace cabin air filter
Replace engine air filter
Replace engine oil and oil filter3
Replace spark plugs5
Reset tire pressure settings in central information display (CID)

Visually inspect brake linings/drums and brake pads/discs4
Inspect the following:
_
Brake lines and hoses

_
Coolant level and coolant composition

_
Heater/air conditioning blower motor

_

Horn, headlight flashers
and hazard warning flashers

_
Lighting system

_
Mobility system
6

_
Seat belts




Dealer Service verification:
D
ate:
Mileage:
1 inspect sealed transmissions, transfer cases and differentials for signs of leakage. if any leakage from a sealed
component is suspected, it is recommended that you have the sealed component inspected by a toyota dealer. inspect
power steering fluid (if equipped) and brake fluid level/condition. inspect engine and inverter (if equipped) coolant
level/condition/freezing point. Your dealer may recommend services (Dealer-recommended Maintenance) based on
inspection results.
2 Driving in heavy traffic, on dirt roads or in urban, dusty or desert areas may shorten the life of the engine air filter and
may require replacement.
3 replace the engine oil and oil filter when the engine oil warning light appears, even if 12 months have not passed or when
driven less than 10,000 miles since the last oil change. reset maintenance reminder light, if oil was changed.
4 replace brake pads when the brake warning light appears.5 Maintenance services of spark plugs are required under the terms of the emissions control Warranty.6 check the sealant container expiration date during inspection. replace the sealant container with a new one before th e
expiration date. refer to the

45
EXPLANATION OF MAINTENANCE ITEMS


Engine Coolant
Check the coolant levels and coolant
composition of both coolant reservoirs
and refill as needed. Inspect hoses and
connections for corrosion and leaks. Toyota
recommends maintenance and repair be
performed by a Toyota dealership or another
qualified service center or repair shop.
For further details, refer to the “Operating
materials” section of the Owner’s Manual .

Engine Oil and Oil Filter
Replace the oil filter and drain and refill
the engine oil at specified intervals. For
recommended oil grade and viscosity,
refer to the
Owner’ s Manual.
NOTE: Your vehicle is certified with Toyota
Genuine Motor Oil SN 0W-20 C5. Replace
the oil filter and drain and refill the engine oil
every 12 months or 10,000 miles, or when the
oil maintenance reminder appears, whichever
comes first. Toyota recommends you have
your Toyota dealer change the engine oil.
Lighting System
Check all exterior and interior lights are
operational. The manufacturer of your vehicle
recommends work on the lighting system,
including bulb replacement, be performed by
your Toyota dealer.




R o a d Te s t
While driving the vehicle, check for proper
operation of engine, transmission, brakes
and steering. Also check the parking brake,
and check for ab
normal noise or vibration
from any part of the vehicle.
Spark Plugs
Replace at specified intervals. Install
new plugs of the same type as originally
equipped. Toyota recommends maintenance
and repair be performed by a Toyota
dealership or another qualified service
center or repair shop.
Maintenance Log
MAINTENANCE

46
EXPLANATION OF MAINTENANCE ITEMS



Steering Linkage and Boots
With the vehicle stopped, check for
excessive freeplay in the steering wheel.
Inspect the linkage for bending and
damage and the dust boots for deterioration,
cracks and damage. Replace any damaged
parts. Toyota recommends maintenance and
repair be performed by a Toyota dealership
or another qualified service center or
repair shop.


Tires
Check tire pressure and check tires for
damage and uneven wear. If the vehicle
is equipped with a spare tire, check the
condition and pressure of the spare.
Washer System
Check windshield wiper and washer nozzle
positions. For further details, refer to the
“Driving” section of the Owner’s Manual .
Wiper Blades
The wiper blades should not show any
signs of cracking, splitting, wear,
contamination or deformation. The
wiper blades should clear the windshield
without streaking or skipping.
Maintenance Log
MAINTENANCE