2020 TOYOTA SUPRA start stop button

32
Instrument panel
1
4
23
5
6
7
89
10
11
Steering wheel controlsCenter console
OVERVIEW
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
1 Central locking system
2 Power windows switches
3 Exterior mirror operation
4 Lights switches (parking lights, daytime running lights, automatic he\
adlight
control, instrument panel light,right/left road side parking light)
5 Turn signal, high beams, automatic high-beam
6, 10 Paddle shifter
7 Steering wheel buttons (cruise control/dynamic radar cruise control)\
8 Instrument cluster
9 Steering wheel buttons (audio volume control switch, telephone switch\
es)
11 Windshield wiper control
12 Adjust the steering wheel
13 Horn, entire surface
14 Hood release lever
15 Trunk lid release button
1 Control Display
2 Hazard warning
3 Ventilation
4 Glove compartment
5 Radio/multimedia
6 Automatic climate control
7 Toyota Supra Command rotary controller with buttons
8 Switches (Sport mode, Supra Safety, Auto Start/Stop function, Parking Sensors*,
Rearview camera, Rear crossing traffic warning*, Vehicle Stability Control System)
9 Electric Parking brake
10 Automatic transmission selector lever
11 Engine Start/Stop button
* If equipped

76
Keyless entry
LOCKING OPERATION
UNLOCKING OPERATION
UNLOCKING THE TRUNK LID
PANIC BUTTON
Carry Smart Key remote
Carry Smart Key remote
Grasp the handle
Touch
Driver door unlock*
Driver’s door
PushONCE: Driver doorTWICE: All doors
Push
Push and hold
Push and hold at least 3 secondsorBriefly press the button on the remote control three times in succession.
Smart Key system
Standby State
DRIVE-READY STATE
CHANGE THE STATES
On - All electrical components can be used.
Stationary – Some electrical components can be used.
Off - All systems OFF.
NOTE: The Smart Key must be carried to enable the start function. With the
selector lever in Park and the brake pedal depressed, push the “START STOP
ENGINE” switch.
Without depressing the brake pedal, pressing the “START STOP ENGINE” switch
will change the state in succession from:* Driver door unlocking function can be programmed to unlock driver door\
only, or
all doors.
Unlocking
Locking
Unlocking trunk lid
Panic mode
Idle state
Standby state
Drive-ready state
Refer to the Owner’s Manual for more details.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
When standby state is switched on, most functions can be used while the \
vehicle is
stationary. Desired settings can be adjusted.
The vehicle is in the standby state after the front doors are opened fro\
m the outside.
OFF is displayed in the instrument cluster. The drivetrain is switched o\
ff
and standby state switched on.
OVERVIEW

1514
FEATURES & OPERATIONS
Normal mode
Balanced tuning between dynamic and efficient driving.
“SPORT” mode
Dynamic tuning for higher agility with an optimized chassis and suspensi\
on. Press
this switch and the “SPORT” indicator illuminates in the instrument cluster.
Sport mode
Launch control
CUSTOMIZE SETTING
Customize settings can be adjusted in the customize driving mode.
Via Toyota Supra Command:
1) “My vehicle”
2) “Vehicle settings”
3) “Configure SPORT INDIVIDUAL”
4) Select the desired setting.
Reset Customize to the standard settings:
“Reset to SPORT STANDARD”
Refer to the Owner’s Manual for limitations and more details.
Sport mode button
The VSC/Traction mode OFF switch can be used to deactivated the Vehicle \
Stability
Control, driving stability is reduced during acceleration and when drivi\
ng in curves.
To disable both VSC/Traction mode system, press and hold switch until VSC
OFF is displayed in the instrument cluster and the VSC OFF/TRACTION indi\
cator
light is illuminated.
Refer to the Owner’s Manual for limitations and more details.
The use of Launch Control causes premature component wear since this fun\
ction
represents a very heavy load for the vehicle.
Do not use Launch Control during the break-in, it is not intended for us\
e on public
roads. Do not use Launch Control unless driving conditions are appropria\
te for the
increased acceleration the feature provides. Keep steering wheel straigh\
t when
driving with Launch Control activated.
Start with Launch control:
1) Switch on drive-ready state.
2) Press the sport button.
3) Press button
4) Select the D selector lever position.
5) Firmly depress the brake pedal with your left foot.
6) Fully depress and hold the accelerator pedal at the kickdown position.
7) The engine speed will be adjusted for launching. Release the brake pedal within
3 seconds.
Refer to the Owner’s Manual for limitations and more details.
Vehicle Stability Control (VSC)/
Traction mode OFF switchAuto Start/Stop function OFF switch
After each engine start using the Start/Stop button, the Auto Start/Stop\
function is
ready. The function is activated from speeds of approx. 3 mph/5 km/h.
To deactivate the system, press the “Auto Start/stop function OFF” button.
Press the button
VSC OFF button
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Door locks - central locking system
Lock
Unlock

2524
FEATURES & OPERATIONS
Park assistance button(on/off manually)
Camera
Rearview camera
The rearview camera system displays an image of the view from the bumper\
of the
rear area of the vehicle. The camera for the rearview monitor system is \
located near
the license plate.
Switching on automatically:
The system is switched on automatically if selector lever position R is \
engaged
when the engine is running. (The system switches off when a certain dri\
ving
distance or speed is exceeded.)
Switching on/off manually:
Press button.
Switching via Toyota Supra Command:
1) If necessary, tilt the controller to the side.
2) “ Rear view camera”
Refer to the Owner’s Manual for limitations and more details on this system.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Driving stability control systems
This chapter describes all standard and optional features offered with t\
he series.
It also describes features and functions that are not necessarily availa\
ble in your
vehicle, e.g., due to the selected options. This also applies to safety-\
related
functions and systems. When using these functions and systems, the appli\
cable
laws and regulations must be observed.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
ABS prevents locking of the wheels during braking.
The vehicle maintains its steering power even during full brake applicat\
ions, thus
increasing active safety.
ABS is operational every time you start the engine.
See OM for situations which the ABS cannot operate sufficiently.
When you apply the brakes rapidly, the system automatically produces the\
greatest
possible braking force boost. It reduces the braking distance to a minim\
um during
emergency stops. This system utilizes all of the capabilities provided b\
y the Anti-
lock Brake System ABS.
Do not reduce the pressure on the brake pedal for the duration of the em\
ergency
stop.
ANTI-LOCK BRAKING SYSTEM (ABS)
BRAKE ASSIST
ADAPTIVE BRAKE ASSIST
DRIVE-OFF ASSIST
VEHICLE STABILITY CONTROL SYSTEM (VSC)
In combination with Dynamic Radar Cruise Control, this system ensures th\
at the
brakes respond even more rapidly when braking in critical situations.
This system supports driving off on uphill grades.
Depending on the vehicle loading, the vehicle may roll back slightly.
Within the physical limits, the system helps to keep the vehicle on a st\
eady course
by reducing engine speed and by braking the individual wheels.
TRACTION MODE
ACTIVE DIFFERENTIAL
Traction mode is a version of the VSC Vehicle Stability Control System w\
here
forward momentum is optimized. The system ensures maximum headway on
special road conditions or loose road surfaces, for instance unplowed sn\
owy roads,
but with somewhat limited driving stability.
The active differential steplessly locks the rear axle depending on the \
driving
conditions. This provides optimal power transfer in all driving conditio\
ns by helping
prevent wheel spin at either rear wheel. The driver is responsible adapt\
ing
his or her driving style to the situation.