2020 TOYOTA SUPRA steering

2524
FEATURES & OPERATIONS
Park assistance button(on/off manually)
Camera
Rearview camera
The rearview camera system displays an image of the view from the bumper\
of the
rear area of the vehicle. The camera for the rearview monitor system is \
located near
the license plate.
Switching on automatically:
The system is switched on automatically if selector lever position R is \
engaged
when the engine is running. (The system switches off when a certain dri\
ving
distance or speed is exceeded.)
Switching on/off manually:
Press button.
Switching via Toyota Supra Command:
1) If necessary, tilt the controller to the side.
2) “ Rear view camera”
Refer to the Owner’s Manual for limitations and more details on this system.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Driving stability control systems
This chapter describes all standard and optional features offered with t\
he series.
It also describes features and functions that are not necessarily availa\
ble in your
vehicle, e.g., due to the selected options. This also applies to safety-\
related
functions and systems. When using these functions and systems, the appli\
cable
laws and regulations must be observed.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
ABS prevents locking of the wheels during braking.
The vehicle maintains its steering power even during full brake applicat\
ions, thus
increasing active safety.
ABS is operational every time you start the engine.
See OM for situations which the ABS cannot operate sufficiently.
When you apply the brakes rapidly, the system automatically produces the\
greatest
possible braking force boost. It reduces the braking distance to a minim\
um during
emergency stops. This system utilizes all of the capabilities provided b\
y the Anti-
lock Brake System ABS.
Do not reduce the pressure on the brake pedal for the duration of the em\
ergency
stop.
ANTI-LOCK BRAKING SYSTEM (ABS)
BRAKE ASSIST
ADAPTIVE BRAKE ASSIST
DRIVE-OFF ASSIST
VEHICLE STABILITY CONTROL SYSTEM (VSC)
In combination with Dynamic Radar Cruise Control, this system ensures th\
at the
brakes respond even more rapidly when braking in critical situations.
This system supports driving off on uphill grades.
Depending on the vehicle loading, the vehicle may roll back slightly.
Within the physical limits, the system helps to keep the vehicle on a st\
eady course
by reducing engine speed and by braking the individual wheels.
TRACTION MODE
ACTIVE DIFFERENTIAL
Traction mode is a version of the VSC Vehicle Stability Control System w\
here
forward momentum is optimized. The system ensures maximum headway on
special road conditions or loose road surfaces, for instance unplowed sn\
owy roads,
but with somewhat limited driving stability.
The active differential steplessly locks the rear axle depending on the \
driving
conditions. This provides optimal power transfer in all driving conditio\
ns by helping
prevent wheel spin at either rear wheel. The driver is responsible adapt\
ing
his or her driving style to the situation.

2726
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Supra Safety
Supra Safety enables central operation of the driver assistance system.
Supra Safety consists of one or more systems that can help mitigate or p\
revent an
imminent collision (depending on how the vehicle is equipped).
• Pre-Collision System with Pedestrian Detection
• Lane Departure Warning with Steering Assist
• Automatic High Beams
• Brake Assist
• Blind Spot Monitor (if equipped)
Some Supra Safety systems are automatically active after every departure\
. Some of
the systems activate according to the last setting.
When press and hold the switch, all Supra Safety systems are switched of\
f.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
THE LOCATION OF THE SAFETY SYSTEM SWITCH
SWITCHING THE SYSTEM ON/OFF
Supra Safety switch
Orange indicator: Some systems are switched off or currently unavailable\
.
No indicator: All systems are switched off.
Green indicator: All systems are switched on.
The system is designed to help mitigate or prevent accidents involving o\
ther
vehicles, pedestrians and cyclists. If an accident cannot be prevented, \
the system
may help reduce the impact speed. The system sounds a warning in the cit\
y speed
range before an imminent collision and activates brakes independently, i\
f needed.
The system is controlled by the following sensors:
• Camera in the area of the interior mirror
• Radar sensor in the front bumper (if equipped)
Pre-Collision System with Pedestrian
Detection
Radar sensor (if equipped)Camera
Refer to the Owner’s Manual for limitations and more details on this system.
The camera system is designed to help detect a bicyclist in daytime cond\
itions and
a pedestrian in daytime and low-light conditions using the forward-facin\
g camera.
DRIVER ASSIST PACKAGE (IF EQUIPPED)
The Driver Assist package adds additional features including a forward f\
acing
millimeter radar sensor and Full-Speed Dynamic Radar Cruise Control. Thi\
s feature
enhances the speeds with which the Pre-Collision System operates in rega\
rds to
vehicle detection and collision mitigation.
Full-Speed Dynamic Radar Cruise Control:
• Enhances the Pre-Collision System vehicle detection capability, all\
owing it to
provide braking intervention at speeds up to 155 mph.
• Enhances the Pedestrian Detection capability, allowing it to provide bra\
king
intervention at speeds up to 53 mph.
* The Pre-Collision System may only apply a brake pulse above 130 mph.
SUPRA SAFETY

3130
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
SUPRA SAFETY
SWITCHING THE SYSTEM ON/OFF
Switching on automatically:
The system is automatically active after every driving off if the functi\
on was
switched on at the end of the last trip.
Switching on/off manually:
Press button. The menu for the Toyota Supra Safety system is displayed.
When press and hold the switch, all Toyota Supra Safety systems are swit\
ched off.
Refer to the Owner’s Manual for limitations and more details on this system.
DISPLAY IN THE INSTRUMENT CLUSTER
A warning symbol appears in the instrument cluster and in the Head-up Di\
splay (if
equipped), where available, if a collision with a detected vehicle is imminent.
Green indicator: At lane marking was detected on at least one side of the
vehicle and warnings can be issued.
SETTING THE WARNING TIME
SETTING THE FORCE OF THE STEERING WHEEL VIBRATION
SWITCHING STEERING INTERVENTION ON/OFF
Setting the warning time via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Lane Departure Warning”
5) Select desired setting:
• “Early”
• “Medium”
• “Reduced”
• “Off”
Setting the force of the steering wheel vibration via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Steering wheel vibration”
4) Select desired setting:
Switching steering intervention on/off via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Steering intervention”
Lane Departure Warning with Steering Assist
The lane departure warning alerts when the vehicle is about to run off t\
he road or
exit the lane.
This camera-based system warns starting at a minimum speed.
Warnings are issued by means of a steering wheel vibration.
The severity of the steering wheel vibration can be adjusted.
The system does not provide a warning if the turn signal is set before l\
eaving the
lane.
If in the speed range up to 155 mph/250 km/h a lane marking is crossed, \
the
system intervenes with a brief active steering intervention in addition \
to vibrating.
The system thus helps keep the vehicle in the lane.
The camera must detect the lane markings for the lane departure warning \
to be
active.
Camera

3332
SUPRA SAFETY
Blind spot monitor (if equipped)
Blind spot monitor detects vehicles in the blind spot or vehicles approa\
ching from
behind in the adjacent lane. A warning is issued in various gradations i\
n these
situations.
Two radar sensors in the rear bumper monitor the area behind and next to\
the
vehicle when traveling faster than a minimum speed.
The minimum speed is shown in the menu for the Toyota Supra Safety syste\
ms.
The system indicates whether there are vehicles in the blind spot, arrow\
1, or
approaching from behind in the adjacent lane, arrow 2.
The light in the exterior mirror illuminates.
Before you change lanes after setting the turn signal, the system issues\
a warning
in the situations described above.
The light in the exterior mirror flashes and the steering wheel vibrates\
.
SWITCHING THE SYSTEM ON/OFF
Switching on automatically:
The Blind spot monitor is automatically activated after departure if the\
function was
switched on at the end of the last trip.
Switching on/off manually:
Press button. The menu for the Supra Safety system is displayed.
When press and hold the switch, all Supra Safety systems are switched of\
f.
SETTING THE WARNING TIME
Setting the warning time via Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Blind spot monitor”
5) Select desired setting:
SETTING THE FORCE OF THE STEERING WHEEL VIBRATION
Setting the force of the steering wheel vibration via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Steering wheel vibration”
4) Select desired setting:
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
The Automatic high-beams detects other traffic participants and automati\
cally
switches the high beams on or off depending on the traffic situation.
The system responds to light from oncoming traffic and traffic driving a\
head of you,
and to ambient lighting, for instance in towns and cities. The high beam\
s can be
switched on and off manually at any time.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
(2) (1)
(1) Press the button on the light switch element.
(2) Press and hold the button on the turn signal lever.
The headlights are automatically switched between low beams and high bea\
ms.
The Automatic high-beams is deactivated when manually switching the high\
beams
on and off.
Light switch element
The indicator light in the instrument cluster is illuminated when the lo\
w
beams are switched on.
The blue indicator light in the instrument cluster lights up when the sy\
stem
switches on the high beams.
Refer to the Owner’s Manual for limitations and more details on this system.